Serene Steam Revive Solar Flare User Guide
- July 26, 2024
- Serene Steam
Table of Contents
Serene Steam Revive Solar Flare
PLEASE READ PRODUCT DISCLAIMER ON BOTH PAGES BEFORE USE
Serene Steam is not a medical device in any way, and it is not intended to
diagnose, treat, cure or prevent diseases. If any physical, mental or other
personal condition is present or persists, contact a doctor before use. We
also recommend that you do not rely solely on the information presented in
this manual and/or anywhere displayed by Serene Steam and that you always read
disclaimers, warnings, and directions before using or purchasing a product.
Serene Steam is a heat producing appliance. Therefore, you should always
consult your doctor or physician before using Serene Steam so you can be sure
that you do not have any condition which may cause harm during use. All sample
images of use described in this manual are merely examples of what’s possible
with Serene Steam and should not be taken as any direction, nor instruction to
do so. Serene Steam produces moist heat and hot water vapors, so any position
you decide to place yourself within its environment should first be
recommended and confirmed by a physician to make sure the features and sample
uses of Serene Steam are not harmful to you in any way. If you are sitting on
a shower bench during use, it is always recommended to stand up slowly during
or after use due to hot vapor/steam exposure. Please be aware that the use of
Essential Oils may also have an effect on one’s reaction. Always position
yourself in a comfortable distance from the system (not closer than
approximately 12 inches) to experience the moist heat infused with Essential
Oils.
DISCLAIMER CONTINUED
Elderly persons and/or those in poor health, or with a heart condition,
high blood pressure or diabetes, must not use Serene Steam devices unless
otherwise directed by your physician. Should you have any other condition
which requires medication of any type, you must also check with your doctor
before using Serene Steam. All bathers, or steam bath users should ask their
doctor for the estimated time recommended for using a steam shower product.
Never use Serene Steam while under the influence of alcohol, prescription
medication, or any other drugs without checking with a doctor as this could be
a serious hazard to your health. Should you become dizzy, faint, or drowsy or
experience any other uncomfortable feeling or sensation, immediately exit the
steam shower. Please be extra aware that the flooring or other surfaces in
your SereneSteam environment may become slippery and dangerous to use. Make
sure that all floor materials are non-slip and that any additional equipment,
such as shower mats, are certified non-slip. This includes any foot-ware that
you may be wearing upon entering the Serene Steam shower. Never make direct
contact with the steam or hot water vapor coming out of the steam opening
during use, as this could cause burns or physical harm. Make sure you are not
allergic to Essential Oils in any way before use. Children under the age of 18
should not use Serene Steam, unless supervised by an adult. By using Serene
Steam, you indemnify Serene Steam, its affiliates or any associated entity
from any lawsuit or action should any bodily harm result from the features
offered or used by Serene Steam. The primary feature of Serene Steam is the
production of moist heat, which can turn your shower enclosure into a
convenient personal steam room and/or spa.
RECOMMENDED STEPS TO FOLLOW
A favored routine to maximize your relaxation during spa use.
All steam spa’s can take some time to heat up your environment. Here is a popular technique to prepare your shower enclosure prior to using Serene Steam. Warm up your body and shower enclosure first by having a regular shower for a few minutes, this may relax you, and warm up your enclosure faster. This is a good technique to make your environment ready for a calming, & therapeutic spa experience. Colder weather months may take slightly longer to heat up your shower enclosure, this is normal with most steam shower systems.
Bathroom extractor fans and air conditioning during spa use
- It is recommended to close your air conditioning vents if the air is flowing in your bathroom while using Serene Steam. If your vents cannot close, switch off the air conditioning during spa use.
- If your extractor fan is installed inside your shower enclosure, it is not recommended to have it functioning during spa use, as it will extract the steam and heat .
PRODUCT FEATURES
Please become familiar with the features before use
When the product is in use you will notice an amount of steam/hot vapor flowing from this opening as shown. The flow will feel similar to a fan blowing hot air and steam/hot vapor simultaneously. Please note that it is normal for mild water droplets to appear here during use.
AROMATHERAPY & ESSENTIAL OILS
When using the aromatherapy feature to enhance your steam spa experience, it
is required to use a bottle dropper to release a desired amount of quality
essential oils into the Serene Steam system during use. Please do not attempt
to add essential oils directly from the bottle.
Mixing your own essential oils
Prior to use, initially pour an amount of essential oils into the empty glass
bottle provided. Use the stainless steel mini funnel for pouring, and repeat
this step to create your own blend of oils. An empty bottle with dropper is
included with all Serene Steam systems.
We recommend testing the strength of the aromatherapy prior to regular use. Test the strength by adding only a few drops of essential oils into the Serene Steam system during spa use (one or two drops initially). Increase, or decrease the amount of essential oil to reach a desired comfort.
AROMATHERAPY & ESSENTIAL OILS
Using aromatherapy during steam spa use
Please use quality, and pure essential oils only
- Release the essential oils from the dropper directly inside the opening which surrounds the Serene Steam control handle. Insert the dropper as far as it will go as shown.
- Only release essential oils into the system once the steam is flowing. Repeat as desired during use. Do not release essential oils into any other area of the Serene Steam system.
PRODUCT MAINTENANCE
There is no general maintenance required, other than replacing the mesh filter
inside the threaded water line connection to prevent any sediment from
entering the system. Replace every 18 months. It is recommended to make a note
of your Serene Steam’s first use-date so you’ll know when to replace the mesh
filter. Replacement mesh filters are available from Serene Steam:
www.SereneSteam.com.
Product Maintenance
Replacing the mesh filter is simple, but it is required to be performed by a qualified plumber only
Step 1
Using the provided tool only, gently manoeuvre the metal blade between your
tiled wall and the top of your trim as shown.
With a slow, and gentle cutting motion, loosen the small amount of silicone behind the trim. The location of the cured silicone should be in the center, and close to the edge. Repeat this step at the bottom of your trim as well, until it is loosened, and able to be removed.
NOTE:
During your initial installation, the install guide detailed the correct
process for stabilizing the trim with a small amount of silicone at the top
and bottom only, so removing the trim should be simple.
GENERAL TROUBLESHOOTING
CLEANING SERENE STEAM
Please take care when using, and cleaning your Serene Steam Spa system. Gently
polish the unit if desried using the included micro fiber cloth only. NEVER
use an abrasive cloth to clean your system. We recommend MILSEK stainless
steel cleaner. Cleaner is not included with your Serene Steam purchase but is
available from numerous on line retailers.
PRODUCT WARRANTY AND SUPPORT YEARS
There are no user-serviceable parts on Serene Steam. Should you become aware
of a change in product performance please contact your distributor and a
Serene Steam technical support member will contact you.
SereneSteam.com
1 877-783-2614 (Corporate)
info@serenesteam.com
Serene Steam is in compliance with the Uniform Plumbing Code IAPMO – IGC- 154-2019 Standard, including product certification.