tc electronic SKYSURFER Mini Reverb Pedal User Guide
- July 27, 2024
- tc electronic
Table of Contents
- tc electronic SKYSURFER Mini Reverb Pedal
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- Safety Instruction
- Controls
- Specifications
- FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- CE CONFIRMATION OD CONFIRMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
tc electronic SKYSURFER Mini Reverb Pedal
Product Specifications
- Model: SKYSURFER MINI REVERB
- Version: 3.0
Product Usage Instructions
Safety Instructions
- Read all safety instructions provided in the manual.
- Keep the manual for future reference.
- Follow all warnings and precautions mentioned.
- Adhere to all operational instructions.
- Avoid using the product near water sources to prevent damage.
- Use a dry cloth for cleaning purposes only.
- Avoid blocking any ventilation openings to ensure proper airflow.
- Keep the product away from heat sources like radiators, stoves, or amplifiers.
- Utilize only attachments and accessories specified by the manufacturer.
- Use the recommended cart, stand, tripod, bracket, or table for safe setup.
- Exercise caution when moving the product on a cart to prevent tip-over accidents.
- Avoid installing the product in enclosed spaces like bookcases.
- Do not place lit candles or other naked flame sources on the product.
Product Care and Disposal
Dispose of the product correctly according to the WEEE Directive
(2012/19/EU) and local regulations.
Frequently Asked Questions
-
Can I use the SKYSURFER MINI REVERB near water sources?
No, it is advised not to use the product near water to prevent damage. -
What should I do if the ventilation openings are blocked?
Ensure that no ventilation openings are blocked to allow proper airflow and prevent overheating of the device. -
Can I clean the device with a wet cloth?
No, clean the device only with a dry cloth as mentioned in the safety instructions to avoid damage.
Safety Instruction
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this apparatus near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
-
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Use only attachments/accessories specified by the manufacturer.
-
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
-
Correct disposal of this product:
This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. -
Do not install in a confined space, such as a book case or similar unit.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
Controls
- OUT – Send the signal to other pedals or a guitar amp via ¼” cable.
- 9 V DC – Connect a standard 9 V power supply (not included).
- IN – Connect your guitar via ¼” cable.
- REVERB – Adjusts the length of reverb decay.
- LED – Lights when the pedal is engaged.
- MIX – Adjusts the wet/dry mix such that turning clockwise results in more reverb.
- TYPE – Selects reverb model type – Spring, Plate or Hall.
- TONE – Adjusts the brightness of the reverb.
- FOOTSWITCH – Press to engage or bypass the pedal. True bypass leaves the guitar signal completely unaffected whenever the pedal is not engaged.
Specifications
- Connectors
- Input ¼” TS, unbalanced
- I mpedance >350 kΩ
- Output ¼” TS, unbalanced
- Power input Standard 9 V DC, center neg, 100 mA
- Physical
- Dimensions 99 x 57 x 56 mm (3.9 x 2.2 x 2.2″)
- Weight 0.29 kg (0.64 lbs)
FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
- Responsible Party Name: Music Tribe Commercial NV Inc.
- Address: 122 E. 42nd St.1, 8th Floor NY, NY 10168, United States
- Email Address: legal@musictribe.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by Music
Tribe can void the user’s authority to use the equipment.
CE CONFIRMATION OD CONFIRMITY
- Hereby, Music Tribe declares that this product is in compliance with Directive 2014/30/EU, Directive 2011/65/EU and Amendment 2015/863/EU, Directive 2012/19/EU, Regulation 519/2012 REACH SVHC and Directive 1907/2006/EC.
- Full text of EU DoC is available at https://community.musictribe.com/
- EU Representative: Music Tribe Brands DK A/S
- Address: Gammel Strand 44, DK-1202 København K, Denmark
- UK Representative: Music Tribe Brands UK Ltd.
- Address: 8th Floor, 20 Farringdon Street London EC4A 4AB, United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>