PRORECK MX 15 15 Inch 2500W Bluetooth Powered PA System Mixer Amp User Manual

July 26, 2024
PRORECK

PRORECK MX 15 15 Inch 2500W Bluetooth Powered PA System Mixer Amp

PRORECK-MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-Mixer-Amp-
producty

Thank you for purchasing this MX15 Portable PA System.
Our MX15 system, which comes with a 8 channel powered mixer, 2x 15 inch passive speakers, 2x speaker stands, 2x speaker cables, a wired mic, a power cable and a manual. We hope that these units will bring you years of performance and reliability. Please read this manual carefully for proper use of your MX15 PA System. Should you need technical assistance, please contact us via email at sales-1@proreck.com.

Important Safety Instructions

  1. Read the instructions carefully before use and keep for further use.
  2. Follow all instructions. Improper use may cause damage to the unit.
  3. Do not expose the unit to rain or moisture.
  4. Install in accordance with the manufacturer’s instructions.
  5. Do not install near any heat sources, such as radiators, heat sources, stoves, or other units that produce heat.
  6. Clean only with a dry cloth.
  7. Unplug during lighting storms or when unused for long periods of time.
  8. Do not place objects filled with liquids, such as vases or beer glasses, on the unit.

Package Includes:

  1. 2x 15″ PP molded passive speaker
  2. 1x 8-channel Powered mixer
  3. 2x 4.6-feet Speaker stands
  4. 2x 19.6-feet 1/4″TS to 1/4″TS speaker cables
  5. 1x Metal dynamic wired microphone
  6. 1x XLR mic cable
  7. 1x 6-feet Power cable
  8. 1x Manual

Setup

  1. Fully extend the speaker stands and position on a level surface.
  2. Tighten the bottom part. See FIG. 1.
  3. Raise the speaker stands to the desired height. Tighten and secure with the safety pin as shown in FIG. 2.PRORECK-logo
  4. Place speakers on stands and position toward the audience and away from the microphones.PRORECK-MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-Mixer-Amp-fig- \(2\)
  5. Connect speaker cables from mixer’s 1/4″ output jacks to speakers’ 1/4″ input jacks.

Amplifier Overview

PRORECK-MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-Mixer-Amp-fig-
\(3\)

  1. USB port
    Use it to insert a USB memory storage device with MP3 files. You can also use it to connect to computer directly to playback music(MP3 files).

  2. Mode button
    Press to switch between USB, line and Bluetooth modes. It does not show USB drive mode before inserted, but you can insert USB drive directly.

  3. Previous button
    When using USB/bluetooth mode, press to go back to the previous song. Press and hold to decrease the volume.

  4. Next button
    When using USB/bluetooth mode, press to go to the next song. Press and hold to increase the volume.

  5. Repeat button
    When using USB mode, press to select repeat mode.

    • We provide 4 modes: Repeat all/ Repeat one/ Random/Folder Repeat all.
    • ALL: This means playing all songs in sequence.
    • ONE: This means repeating the current song
    • RAN: Means playing all songs randomly.
    • FOLD: This means  repeating all songs in the current folder.
  6. Play/pause button
    Press to play or pause the MP3 song when using USB/BLUETOOTH mode.

  7. LCD screen
    This screen will help you navigate between the modes and folders.

  8. Power indicator

  9. Master volume indicator
    indicators are on, i men master lume his as anile el huth doe the master volume.

  10. The phantom power button and indicator

  11. band graphic equalizer
    Use these slider controls to adjust the music tone with +/-12dB boost or cut at 100Hz,330Hz,1kHz,3.3kHz,10kHz.

  12. Master volume
    Use it to set the general volume level for the pa system.

  13. Effects controller

  14. Volume level knob: It adjusts the mix level of the effect sound.

  15. Repeat knob: The Echo knob controls the echo interval.

  16. Delay knob: It controls the time interval of the delay.

  17. RCA line output
    Use it to connect additional powered speakers, recording devices, etc.

  18. RCA line input
    Use it to connect to external audio devices.

  19. Balanced 1/4″ TRS input
    Use it to connect guitars, keyboards, electronic drums, etc.

  20. Balanced XLR mic input

  21. Volume level
    It adjusts the mic volume for the corresponding channel.

  22. Bass control
    Use it to set bass volume for the correspondina channel.

  23. Treble control
    Use it to set treble volume for the corresponding channel.

  24. Echo Effect
    It adjusts the echo level for the corresponding channel.

  25. MP3 volume level:
    Use it to adjust MP3 volume level (USB and bluetooth function).

  26. RCA line volume
    Use it to adjust RCA volume level.

  27. AC power
    Suitable for AC 115V 60Hz/AC 230V 50Hz.

  28. OFF power switch

  29. 115V/230V AC selector
    The MX15 system can be operated in 115V or 230V. Before connecting the mixer to a power source, simply slide the selector switch to the required voltage.

  30. 6.35mm speaker output
    Use it to connect to two passive speakers.

Applications

USB Function

  1. Check the AC selector (28) first. Then plug in and turn on the power(27).
  2. Insert a USB memory storage device into the USB port(1). Or connect with PC computer directly.
  3. Turn up the channel volume(24) and master volume(12) to a suitable level.

Bluetooth Function

  1. Check the AC selector(28) first. Then plug in and turn on the power (27).
  2. Press the MODE button(2) to find “BLUE” on the LCD display.
  3. Turn on bluetooth function on bluetooth device. Find the “proreck” device and connect. When “BLUE” stops flashing on the LCD display, it means that your device is connected already.
  4. Turn up your bluetooth device volume, the channel volume(24) and master volume (12) to a suitable level. When in BLUE mode, you can connect with your bluetooth device ,such as ipad, iphone and PC.

Mic/Guitar Function

  1. Check the AC selector (28) tirst. Then plug in and turn on the power(2 7).
  2. Connect the mics through XLR jack(19). Or connect guitars through 6.35mm jack(18).
  3. Turn up the mic volume(20) and master volume(12) to a suitable level

Condenser Mic Function

  1. Check the AC selector(28) first. Then plug in and turn on the power (27).
  2. Connect the condenser mic through XLR jack(19). Then press the phantom power button (10).
  3. Turn up the mic volume(20) and master volume (12) to a suitable level.

Line in/line out Function

  1. Check the AC selector (28) first. Then plug in and turn on the power (27).
  2. Connect a music device through the RCA input(17).
  3. Turn up the channel volume(25) and master volume(12) to a suitable level.
  4. Connect to other additional speakers via RCA output(16).

TROUBLESHOOTING

PRORECK-MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-
Mixer-Amp-fig- \(9\)

Hook-upPRORECK-MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-Mixer-Amp-
fig- \(10\) PRORECK-
MX-15-15-Inch-2500W-Bluetooth-Powered-PA-System-Mixer-Amp-fig-
\(11\)

Contact Information
Website: www.proreck.com
Email: sales-1@proreck.com

PRORECK AUDIO, INC
brand@proreck.com
www.audioproreck.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PRORECK User Manuals

Related Manuals