PRORECK AUDIO PARTY-12 2 Way Powered PA Speaker System Owner’s Manual

PRORECK AUDIO PARTY-12 2 Way Powered PA Speaker System

Product Information

Specifications

• Brand: PRORECK AUDIO, INC
• Website: www.audioproreck.com

Product Usage Instructions

The remote control allows you to conveniently operate your device from a distance. To use the remote control effectively, follow these steps:

1. Ensure the remote control has fresh batteries installed.
2. Point the remote control towards the device you want to control.
3. Press the appropriate buttons on the remote control to navigate through different functions or settings.
4. Keep the remote control within the recommended range for optimal performance.

FAQ

• Q: How can I troubleshoot issues with the remote control not working?
• A: If the remote control is not working, try the following steps:
  • Check and replace the batteries if needed.
  • Ensure no obstructions are blocking the line of sight between the remote and the device.
  • Reset the remote control by removing the batteries and pressing all the buttons for a few seconds before reinserting the batteries.
  • Contact customer support if problems persist.

OVERVIEW

1. USB port: Use it to insert the USB memory storage device with MP3 files.

2. SD port: Use it to insert the SD card with MP3 files.

3. Remote receiver.

4. Input mode: Select an input mode, BLUE/FM/MP3 player.

5. Press once to jump to the previous song or FM channel.
   Press and hold to decrease the volume level.

6. Press once to jump to the next song or FM channel.
   Press and hold to increase the volume level.

7. It is a repeat button. We provide 4 modes: Repeat all/ Repeat one/Random/ Folder Repeat all.

8. Press once to play or pause a song(MP3 mode).
   Press and hold on to enter folder mode, and the screen will show H FOLD H . Then press to choose your favorite music folder.
   Press once to search radio stations and they can be saved automatically(FM mode).

9. Mic 1. level control: Use this control to set the volume level of MIC 1-in signal

10. Mic 1. lnput: XLR connector for a balanced Microphone.

11. Mic 2.lnput:1/4″ connector for an unbalanced Microphone.

12. Mic 2. level control: Use this control to set the volume level of MIC 2-in signal

13. Mic 1. lnput: XLR connector for a balanced Microphone.

14. Mic 2.lnput:1/4″ connector for an unbalanced Microphone.

15. Volume control for MP3 in or Line in.

16. MP3/Line selector switch: When the button is in, you will be able to get sound. the bluetooth, radio, and USB/SD card. When the button is out, you will get a sound when you plug in a RCA cord.

17. Line input: This allows you to connect an external audio device through an RCA jack.

18. Line Output: Use this RCA jack to connect other amplifiers in the cascade.

19. Volume control: Use this control to set the general volume

20. Treble control: Use this control to set the treble volume.

21. Bass control: Use this control to set the bass volume.

22. Power indicator.

23. Overload indicator:lf the red LED ON constantly, low down the general volume control.

24. Speaker out:lt is SPEAKON jack,use it to connect another passive speaker

25. 115V-230V selector.

26. ON/Off power switch.

27. AC power: Use it to connect the AC power cord.

APPLICATION USES

SD and USB Insert Instructions

1. Turn on the power.
2. Push the button in and choose Mp3 mode.
3. Turn the LEVEL and VOLUME buttons to 0 level.
4. lnsert SD card or USB memory storage device.
5. Turn the LEVEL and VOLUME buttons to a suitable level respectively.

Bluetooth Usage

1. Turn on the power.
2. Push the button in and choose Mp3 mode.
3. Turn the LEVEL and VOLUME buttons to O level.
4. Keep pushing the MODE button to find BLUE.
5. When in the BLUE mode, the display will show BLUE.
6.  Connect the device with the BLUE function.
7. Turn the LEVEL and VOLUME buttons to a suitable level.
   When in the BLUE mode,you can connect your bluetooth devices such as ipad,iPhone, or PC to the amplifier.

MIC Directions

1. Turn on the power.
2. Turn MIC LEVEL and VOLUME buttons to O level.
3. Use 1/4″input jack Mic to insert
4. Turn MIC LEVEL and VOLUME buttons to a suitable level respectively.

You can use two microphones at the same time through an XLR connector and 1 /4″input jack.M IC1 LEVEL and MIC2 LEVEL are used to adjust the volume of two microphones respectively

Line In Mode

1. Turn on the power.
2. Push the button out and choose LINE mode.
3. Turn the LEVEL and VOLUME buttons to O level.
4. Connect the music source unit to the RCA inputs marked LINE IN.
5. Turn the level and volume buttons to a suitable level respectively.

You can use the LINE IN function when you wish to link up an additional stereo signal source without the use of a mixer console. Like CD players, DVD music players, MP3 players, etc.

Remote Control Function

• Press these buttons to access the previous-) or next +) folder when using USB/SD mode.
• Press this button to switch between USB/SD, FM, BLUETOOTH, and modes.
• Press this button to go to the previous or next song or channel when using USB/SD or FM mode.
• Press this button to play or pause the MP3 song when using USB/SD mode or select the FM channel automatically.
• Press this button to decrease (-) or increase+) the volume.
• Press this button to select from 5 preset EQs: POP, ROCK, JAZZ, CLASSICand COUNTRY.
• Press this button to select songs by 10-digit numbers.
• Press this button to select songs by 100-digit numbers.
• Press these number buttons to select the MP3 files.

CONTACT

• PRORECK AUDIO,INC
• brand@proreck.com
• www.audioproreck.com

References

• PA Speakers, Accessories, Subwoofers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>