PRORECK AUDIO PARTY-10 Array Column Powered User Manual
- July 29, 2024
- PRORECK AUDIO
Table of Contents
- PRORECK AUDIO PARTY-10 Array Column Powered User Manual
- ASSEMBLY
- DISASSEMBLY
- INTRODUCTION
- PACKAGE CONTENTS
- SPECIFICATIONS
- IMPORTANT SAFETY INSTRUCTION
- GETTING STARTED
- LINE IN INSTRUCTIONS
- TWS INSTRUCTIONS
- BLUETOOTH INSTRUCTIONS
- MIC INSTRUCTIONS
- AMPLIFIER OVERVIEW
- REMOTE CONTROL FUNCTION
- APPLICATIONS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PRORECK AUDIO PARTY-10 Array Column Powered User Manual
PRORECK AUDIO,INC
brand@proreck.com
www.audioproreck.com
ASSEMBLY
- Push one column housing (c) to the active sub (d) from the back.
- Push the second column housing (b) to the first column housing (c) from the back.
- Push the column speaker (a) to the second column housing (b) from the back.
DISASSEMBLY
- To disassemble the speaker system, please hold the column speaker (a) and column housing (b) (c) by one hand, and then gently push out the column housing (c) backward by the other hand.
- Disconnect the column speaker (a), column housing (b) (c) piece by piece.
INTRODUCTION
Thank you for purchasing our PARTY 10 pa system. Please read the manual carefully before use and keep it in safe place for future reference. For any questions, please email us at sales-1@proreck.com.
The portable PARTY 10 speaker system consists of four 3″ Mid-high range drivers with a built-in 500 watts amplifier. The amplifier features 3-channel inputs, as well as a digital media player with USB/SD and Bluetooth functions.
PACKAGE CONTENTS
Ix Active sub
Ix Column speaker
2x Column housing
Ix Remote control
Ix Power cable
PARTY 10
SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTION
- Read the instructions carefully before use and keep the manual for further use.
- Follow all instructions. Improper use may cause damage to the unit.
- Do not expose the unit to rain or moisture.
- Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources, such as radiators, heat sources, stoves, or other units that produce heat.
- Clean only with a dry cloth.
- Unplug the unit during lighting storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, operate abnormally.
- This unit shall not be exposed to dripping pr splashing.
- Do not place objects filled with liquids, such as vases or beer glasses on the unit.
- Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
GETTING STARTED
The following steps will help you set up the PARTY 10 quickly.
- Read instructions carefully and check all components are included in the package.
- Turn down the MIC volume, LINE volume and ECHO.
- Plug in and turn on the speaker.
- Connect your devices.
- Slowly adjust the volume knobs of the corresponding channel to a comfortable listening level.
LINE IN INSTRUCTIONS
- Plug in and turn on the power (19) (20).
- Turn the line volume (13) to the MIN level.
- Press the MODE button (3) to find “LINE” on the LCD display.
- Connect the device through XLR or RCA input jack.
- Turn the line volume (13) to a suitable level.
- To connect to other recording device or PA system, connect it through XLR output.
TWS INSTRUCTIONS
TWS (True wireless stereo) allows you to play music from a bluetooth device over two PARTY10 pa systems simultaneously.
Noted:
- Make sure each PA system have the “TWS” function. PA systems should be the same model.
- Under “TWS” function, pa system only can playback music via the bluetooth device.
Operating instructions:
- Plug in and turn on the power (19) (20).
- Press each speaker’s MODE button (3) to switch to BLUETOOTH mode.
- Choose one PA system as master PA system. Long press the main PA system’s play/pause button (7) for 5 seconds. Then you will hear ding-dong sound to indicate that systems are synced. Then master PA system’s screen will display “br-A” and the second PA system’s screen will display “br-B”.
- Pair your bluetooth device to your master pa system via bluetooth.
- To exit this function, long press the play/pause button (7) for 5 seconds on any PA system. The PA system’s screen will no longer display “br-A”.
BLUETOOTH INSTRUCTIONS
- Plug in and turn on the power (19) (20).
- Turn the line volume (13) to the MIN level.
- Press the MODE button (3) to find “BLUE” on the LCD display.
- Connect the device. When “BLUE” stops flashing on the LCD display, it means that your device is connected already.
- Turn the line volume (13) to a suitable level.
When in BLUE mode, you can connect your bluetooth device, such as pad, phone and PC to the speaker.
NOTE: Remember to turn up the volume of the connected device to a suitable level for a good sound effect. If there is no sound, please check if you have turned up the BLUETOOTH device volume.
MIC INSTRUCTIONS
- Plug in and turn on the power (19) (20).
- Turn the MIC volume (8) (9) to the MIN level.
- Connect the microphone to MIC input (11) (12) with a 6.35mm cable.
- Turn the MIC volume (8) (9) to a suitable level.
- Turn up the ECHO (10) if needed.
AMPLIFIER OVERVIEW
REMOTE CONTROL FUNCTION
APPLICATIONS
SD/USB INSTRUCTIONS
- Plug in and turn on the power (19) (20).
- Turn the line volume (13) to the MIN level.
- Insert a SD card or USB drive to the SD port (2) or USB drive port (1).
- Turn the line volume (13) to a suitable level.
NOTE: MP3, cellphone, pad and PC can not be read by USB. You may connect them by BLUETOOTH or LINE IN function. If there is no sound, please check if the Line Volume is turned up.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>