PRORECK MX-10 6-Channel Powered Bluetooth Mixer User Manual

MX 10
USER MANUAL

PRORECK AUDIO,INC
brand@proreck.com
www.audioproreck.com

MX-10 6-Channel Powered Bluetooth Mixer

Thank you for purchasing this MX10 Portable PA System.
Our MX10 system, which comes with a6 channel powered mixer, 2x 10 inch passive speakers, 2x speaker stands, 2x speaker cables, a wired mic, a power cable and a manual.
We hope that these units will bring you years of performance and reliability. Please read this manual carefully for proper use of your MX10 PA System. Should you need technical assistance, please contact us via email sales-1@proreck.com.

Important Safety Instructions

1. Read the instructions carefully before use and keep for further use.
2. Follow all instructions. Improper use may cause damage to the unit.
3. D0 not expose the unit to rain or moisture.
4. Install in accordance with the manufacturer’s instructions.
5. Do not install near any heat sources, such as radiators, heat sources, stoves. or other units that produce heat.
6. Clean only with a dry cloth.
7. Unplug during lighting storms or when unused for long periods of time.
8. Do not place objects filled with liquids, such as vases or beer glasses, on the unit.

Package Includes:

(1) 2x 10° PP molded passive speaker
(2) 1x 6-channei Powered mixer
(3) 2x 4.6-feet Speaker stands
(4) 2x 19.6-feet 1/4°TS to 1/4°TS speaker cables
(5) 1x Metal dynamic wired microphone
(6) 1x XLR mic cable
(7) 1x 6-feet Power cable
(8) 1x Manual

Setup

1. Fully extend the speaker stands and position on a level surface.
   (1) Tighten the bottom part. See FIG. 1.
   (2) Raise the speaker stands to the desired height. Tighten and secure with the safety pin as shown in FIG. 2.

2. Place speakers on stands and position toward the audience and away from the microphones.

3. Connect speaker cables from mixer’s 1/4″ output jacks to speakers’ 1/4″ input jacks.

Amplifier Overview

1. USB port
   Use it to insert a USB memory storage device with MP3 files. You can also use it to connect to computer directly to playback music(MP3 files).

2. Mode button
   Press to switch between USB, line and Bluetooth modes. It does not show USB drive mode before inserted, but you can insert USB drive directly.

3. Previous button
   When using USB/bluetooth mode, press to go back to the previous song. Press and hold to decrease the volume.

4. Next button
   When using USB/bluetooth mode, press to go to the next song. Press and hold to increase the volume.

5. Repeat button
   When using USB mode, press to select repeat mode.
   We provide 4 modes: Repeat all/ Repeat one/ Random/Folder Repeat all.
   ALL: Means playing ali songs in sequence.
   ONE: Means repeating the current song.
   RAN: Means playing all songs randomly.
   FOLDO: Means repeating all songs in the current folder.

6. Play/pause button
   Press to play or pause the MP3 song when using USB/BLUETOOTH mode.

7. LCO screen
   This screen will help you navigate between the modes and folders.

8. Master volume
   Use it to set the general volume level for the pa system.

9. MP3 volume level
   Use it to adjust MP3 volume level (USB and bluetooth function).

10. Tape in volume
    Use it to adjust line input volume level.

11. RCA line output
    Use it to connect additional powered speaker, recording device, etc.

12. RCA line input
    Use it to connect external audio device.

13. 6.35mm line output
    Use it to connect additional powered speaker, recording device, etc.

14. 6.35mm line input
    Use it to connect external audio device.

15. Treble control
    Use it to set treble volume for line. BLUETOOTH and USB mode

16. Middile control
    Use it to set middile volume for line. BLUETOOTH and USB mode.

17. Bass control
    Use it to set bass volume for line, BLUETOOTH and USB mode.

18. Effects controller
    *18. Volume levei knob: It adjusts the mix level of the effect sound.

19. Delay knob: It controls the time interval of the delay.

20. Repeat knob : The Echo knob controls the echo interval.

21. RCA input
    Use it to connect guitars, keyboards, electronic drums, etc.

22. Balanced XLR mic input

23. Balanced 1/4” TRS input
    Use it to connect guitars, keyboards, electronic drums. etc.

24. Baes control
    Use it to set bass volume for the corresponding channel.

25. Treble control
    Use it to set treble volume for the corresponding channel.

26. Volume level
    it adjusts the mic volume for the corresponding channel.

27. Echo Effect
    It adjusts the echo level for the corresponding channel.

28. 48V Phantom power button and indicator

29. AC power
    Suitable for AC 115V 60HZ/AC 230V 50Hz.

30. ON/OFF power switch

31. 15V/230V AC selector
    The MX10 system can be operated in 115V or 230V. Before connecting the mixer to a power source, simply slide the selector switch to the required voltage.

32. 6.35mm speaker output
    Use it to connect to two passive speakers.

Applications

USB Function

1. Check the AC selector(31) first. Then plug in and turn on the power(30).
2. Insert a USB memory storage device into the USB port(1). Or connect with PC computer directly.
3. Turn up the MP3 volume(9) and master volume(8) to a suitable level.

BLUETOOTH Function

1. Check the AC selector(31) first. Then plug in and turn on the power(30).

2. Press the MODE button(2) to find “BLUE” on the LCD display.

3. Turn on bluetooth function on bluetooth device. Find the “proreck” device and connect.
   When “BLUE” stops flashing on the LCD display, it means that your device is connected already.

4. Turn up your bluetooth device volume, the MP3 volume(9) and master volume(8) to a suitable level
   When in BLUE mode, you can connect with your bluetooth device, such as ipad, iphone and PC.

Dynamic Mic/Guitar Function

1. Check the AC selector(31) first. Then plug in and turn on the power(30).
2. Connect the mic through XLR jack(22). Or connect acoustic guitars through 6.35mm jack(2:
3. Turn up the mic volume(26) and master volume(8) to a suitable level.

Condenser Mic Function

1. Check the AC selector(31) first. Then plug in and turn on the power(30).
2. Connect the condenser mic through XLR jack(22). Then press the phantom power button(z
3. Turn up the mic volume(26) and master volume(8) to a suitable level.

Line inAine out Function

1. Check the AC selector(31) first. Then plug in and turn on the power(30).
2. Connect a music device through the RCA input(12) or 6.35mm input({14).
3. Turn up the tape in volume(10) and master voilume(8) to a suitable level.
4. Connect to other additional speakers via RCA output(11) of 6.35mm output(13).

TROUBLESHOOTING

volume, channel volume. bluetooth device volume (if in bluetooth mode). Check speaker connections. Turn up mic volume. Check mic.
No Effects| Is the mic effect knob turned up? Are the master EFFECT controls turned up?| Make sure the channel effect control is turned up. Check the master effect controls. Adjust master effect controls until audio effect is heard.
Files on USB memory device will not play back| Are the audio files the proper format?| Make sure your audio files are the correct format(MP3 files).
Loud feedback| If it goes away when channel volume. master volume controls are turned down.
it is acoustic feedback.| Reduce microphone effect. Reposition microphone behind or farther from speakers.
There is a noticeable humming/buzzing/ distorted noise| Is channel volume or master volume at very high volume? In which mode noise occurs?| Check channel bluetooth mode: Reduce channel volume and increase master volume: If noise occurs
In line mode, try another cable.
Can not connect via bluetooth| Other functions, such as USB/LINE are working| 1. Restart the speaker and connect with another bluetooth device.
2. If it still doesn’t work. please request a free MP3 module accessory from seller.
There is no/faint sound coming from the top speaker(horn tweeter)| The speaker has bass| Please contact us to get a free tweeter diaphragm accessory to replace It yourself.
The microphone doesn’t work| The mic works well with another mic cable| Please contact us to get a free microphone cable.

Contact Information

Website: www.proreck.com
Email: sales-1@proreck.com

Hook-up

References

• PA Speakers, Accessories, Subwoofers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>