TUO Contact Sensor with Matter Instruction Manual
- June 13, 2024
- TUO
Table of Contents
Contact Sensor Getting Started
Contact Sensor with Matter
Getting started
Press the button on the front of the contact sensor to activate.
Pairing & activation
Pair the TUO Contact Sensor to the home hub of your choice. Ensure your
network has a compatible Thread Border Router.
To learn more about Thread Border Routers, head to
http://findtuo.com/borderrouter
Remove the backplate and flip it over to reveal the pairing code. Scan or type
in the manual pairing code in the platform of your choice.
Battery replacement
When it is time to replace the battery, simply turn the TUO Contact Sensor
around and remove the backplate.
Resetting the device
To preform a soft reset, push the button on the front of the TUO Contact
Sensor. The green light will begin to flash when a reboot is successful.
Push it in and hold for 5 seconds to completely reset the device. Please note
that this will remove the device from the platform you are using and will
require re-pairing.
Backplate mounting
The backplate can be removed from the TUO Contact Sensor and can be mounted
by screws or tape to the door / window.
| 
---|---
Warning
Magnet warning: This device contains a magnet and should be kept away from
people with pacemakers or other medical devices that may be affected by
magnetic fields. It is important to keep the device at a safe distance from
these individuals to avoid any potential harm or interference with their
medical devices.
Please note that failure to follow the safety instructions and warnings
provided in the user manual may result in injury, damage to property, or other
harmful consequences.
Legal information
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates uses and can radiate radio
frequency energy, and if not installed and used in accordance with
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this device does cause harm to television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following measures: re-orient
or relocate the receiving antenna, increase separation between the equipment
and receiver, or consult a dealer or an experienced radio/TV technician for
help.
Changes or modifications not expressly approved by TUO Accessories LLC can void
the user’s authority to operate this device.
Contact Sensor
Please keep your Matter Setup Code in a safe place.
You need it to securely add TUO Contact Sensor to your home.
findtuo.com
Model: TCS-07505
• FCC ID: 2BA2K-TCS-07505