Alfresco AXE-30GT-NG 30 Dual Zone Griddle Instructions
- July 26, 2024
- Alfresco
Table of Contents
AXE-30GT
GRIDDLE PARTS MANUAL
AXE-30GT-NG 30 Dual Zone Griddle
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SUPERIOR
EQUIPMENT SOLUTIONS
INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT WRITTEN PERMISSION FROM
SUPERIOR
EQUIPMENT SOLUTIONS, INC. IS PROHIBITED.
DRAWN BY: ADRIAN CRISCI
LAST SAVED: 7/31/2023 11:00:25 AM
PROJECT TITLE: AXE-30GT MANUAL
DRAWING TITLE: AXE-30GT GRIDDLE PARTS MANUAL
DRAWING NO.: **500-0267 MANUAL
**
BILL OF MATERIAL
| NO. | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 170-0043 | GREASE TROUGH | 1 |
| 2 | 170-0048 | GREASE SHIELD | 1 |
| 3 | 170-0057 | IGNITER MOUNT | 2 |
| 4 | 170-0062 | ELECTRICAL J-BOX | 1 |
| 5 | 170-0090 | GREASE TRAY | 1 |
| 6 | 200-0089 | BOLT – HEX HEAD 1/4-20 x 1/2″ L | 2 |
| 7 | 200-0199 | SCREW 6-32 x 1/4 – PAN HEAD CROSS – SS | 16 |
| 8 | 510-1483 | FIREBOX ASSEMBLY | 1 |
| 9 | 510-1484 | PIPING ASSEMBLY | 1 |
| 10 | 510-1485 | GRIDDLE PLATE ASSEMBLY | 1 |
| 11 | 510-1486 | FRONT PANEL MAIN ASSEMBLY | 1 |
| 12 | 510-1508 | COVER ASSEMBLY | 1 |
| 13 | 510-1509 | ELECTRICAL ASSEMBLY | 1 |
| 14 | 510-1547 | T-STAT BULB SUPPORT BRACKET | 2 |
DRAWN BY: ADRIAN CRISCI
LAST SAVED: 8/1/2023 7:23:52 AM
PROJECT TITLE: AXE-30GT MANUAL
DRAWING TITLE: AXE-30GT GRIDDLE ASSEMBLY
DRAWING NO.: 500-0267 M1
BURNER ORIFICES
NG| 220-0436
LP| 220-0472
BILL OF MATERIAL
| NO. | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 200-0087 | WASHER, 1/4″ – SPRING LOCK – SS | 3 |
| 2 | 200-0242 | BOLT 1/4-20 UNC x 3/4 – HEX HEAD – SS | 3 |
| 3 | 200-0111 | SCREW 8-18 X ½ – SELF TAP – 410 SS | 4 |
| 4 | 200-0206 | 8-32 KEP NUT 18-8 STAINLESS | 4 |
| 5 | 200-0274 | ELBOW 90°- CAST IRON – 1/2″ FPT x 1/2″ MPT | 1 |
| 6 | 210-0692 | HOT SURFACE IGNITER – SPIRAL ELEMENT | 2 |
| 7 | 220-0275 | NIPPLE – 1/2″ MPT X 3/8″ OD FL | 1 |
| 8 | 220-0280 | REGULATOR GAS – MAXITROL RV48CL440002 | 1 |
| 9 | 220-0478 | GAS LINE – FLEX – SS – 5/16″Ø x 8″ | 2 |
| 10 | 220-0483 | SAFETY GAS VALVE | 2 |
| 11 | 220-0485 | REDUCER 9/16-24 UNEF x 5/16″ COMPRESSION – BRASS | 2 |
| 12 | 220-0531 | GAS MANIFOLD | 1 |
| 13 | 220-0532 | COUPLING 5/16″ Ø COMP X 1⁄8-27 NPTS | 2 |
| 14 | 510-1502 | BURNER ASSEMBLY | 2 |
| 15 | SEE NOTE | GAS ORIFICE | 2 |
DRAWN BY: ADRIAN CRISCI
LAST SAVED: 8/1/2023 6:56:29 AM
PROJECT TITLE: AXE-30GT
DRAWING TITLE: PIPING ASSEMBLY
DRAWING NO.: 510-1484 M1
BILL OF MATERIAL
| NO. | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 200-0062 | SCREW 10-32 X 3/4 – PAN HEAD – PHILLIPS | 3 |
| 2 | 200-0086 | SCREW 1/4-20 X 3/8: – TRUSS HEAD PHILIPS | 2 |
| 3 | 200-0087 | WASHER, 1/4″ – SPRING LOCK – SS | 2 |
| 4 | 200-0089 | BOLT – HEX HEAD 1/4-20 x 1/2″ L | 2 |
| 5 | 200-0098 | SCREW 6-32 X ½” – FLAT HEAD 82° – PHILIPS | 4 |
| 6 | 200-0125 | NUT THREAD CUTTER FOR 1/4″ Ø STUD -SPEED NUT | 2 |
| 7 | 210-0584 | SWITCH – LIGHT – LATCHING [ON/OFF] | 1 |
| 8 | 210-0661 | AMBER LED LIGHT – Ø 8 mm – WITH PINS | 2 |
| 9 | 290-0377 | ALFRESCO RANGE LOGO | 1 |
| 10 | 290-0388 | ALFRESCO RANGE KNOB – BEZEL RING | 2 |
| 11 | 510-1487 | FRONT PANEL WELDED / RIVETED PARTS | 1 |
| 12 | 510-1489 | LIGHT ASSEMBLY | 1 |
DRAWN BY: ADRIAN CRISCI
LAST SAVED: 8/1/2023 7:33:43 AM
PROJECT TITLE: AXE-30GT
DRAWING TITLE: FRONT PANEL MAIN ASSEMBLY
DRAWING NO.: 510-1486 M1
BILL OF MATERIAL
| NO. | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 170-0040 | LIGHT BRACKET | 1 |
| 2 | 170-0062 | ELECTRICAL J-BOX | 1 |
| 3 | 200-0004 | GROMMET 9/16″ OD, 1/16″ MAT’L, 7/16″ ID | 2 |
| 4 | 200-0009 | STRESS RELIEF BUSHING | 1 |
| 5 | 200-0199 | SCREW 6-32 x 1/4 – PAN HEAD CROSS – SS | 3 |
| 6 | 200-0320 | SCREW 8-32 x ⅜ – GROUNDING SCREW | 1 |
| 7 | 210-0258 | CABLE TIE – T&B L-5-50PM-9 | 3 |
| 8 | 210-0499 | CABLE 115/120V 10A 18/3 SJTOW – 96″- 90° PLUG NEMA 5-15 | 1 |
| 9 | 210-0584 | SWITCH – LIGHT – LATCHING [ON/OFF] | 1 |
| 10 | 210-0661 | AMBER LED LIGHT – Ø 8 mm – WITH PINS | 4 |
| 11 | 210-0676 | PANEL LIGHT HARNESS | 2 |
| 12 | 210-0692 | HOT SURFACE IGNITER – SPIRAL ELEMENT | 2 |
| 13 | 210-0782 | GRIDDLE THERMOSTAT | 2 |
| 14 | 210-0816 | PANEL LIGHT HARNESS | 1 |
| 15 | 210-0822 | ELECTRICAL WIRING KIT | 1 |
| 16 | 220-0483 | SAFETY GAS VALVE | 2 |
| 17 | 290-0647 | AFRESCO GRIDDLE KNOB ASSEMBLY | 2 |
NOTES:
- ITEM 15 SOLD AS A KIT ONLY, NOT INDIVIDUAL HARNESSES.
- ITEM 16 ALSO SHOWN ON 510-1484 M1 FOR PIPING PURPOSE.
SUPERIOR EQUIPMENT SOLUTIONS
1085 BIXBY DRIVE
CITY OF INDUSTRY, CA. 91745
DRAWN BY: ADRIAN CRISCI
LAST SAVED: 8/1/2023 7:41:49 AM
PROJECT TITLE: AXE-30GT
DRAWING TITLE: ELECTRICAL ASSEMBLY
DRAWING NO.: 510-1509 M1
Documents / Resources
|
Alfresco AXE-30GT-NG 30 Dual Zone
Griddle
[pdf] Instructions
AXE-30GT-NG, AXE-30GT-M1, AXE-30GT-NG 30 Dual Zone Griddle, AXE-30GT-NG, 30
Dual Zone Griddle, Dual Zone Griddle, Zone Griddle, Griddle
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>