ALFRESCO ALX2 30 Inch Built In Gas Grill Instructions
- June 17, 2024
- Alfresco
Table of Contents
ALFRESCO ALX2 30 Inch Built In Gas Grill
Specifications
- Lamp Models: G940120 – G9 Base 40 W – 120 VAC (Part # 210-0317)
- Protective Glass Cover : Part # 210-0286
Lamp Replacement Instructions
- Ensure the ALX2 unit is turned off and unplugged from the power source.
- Locate the lamp protective glass cover (Figure #1) on the ALX2 unit.
- Gently remove the lamp’s protective glass cover by sliding it out of its position.
- Inspect the lamp shape in Figures 2 and 3 to identify the correct replacement lamp model for your ALX2 unit.
- If the lamp shape matches G940120 – G9 Base 40 W – 120 VAC (Part # 210-0317), proceed to the next step.
- Carefully handle the replacement lamp using a soft clean cloth to avoid fingerprints and grease.
- Insert the replacement lamp into the lamp socket, ensuring a secure fit.
- Slide the lamp’s protective glass cover back into its original position until it clicks into place.
- Plug the ALX2 unit back into the power source.
- Turn on the ALX2 unit to test the new lamp.
INSTRUCTION
LAMP REPLACEMENT INFORMATION
- There are two lamp models available in the ALX2 family of barbeques. The change in lamps is part of our continued improvement of our products.
- To determine the correct replacement lamp for your ALX2 unit, remove the lamp protective glass cover (figure # 1) and identify the proper lamp shape on figures 2 and 3.
Note: Use a soft clean cloth when handling lights. Always keep halogen lights free of fingerprints and grease when replacing them.
FAQ
Frequently Asked Questions
- Q: How do I determine the correct replacement lamp for my ALX2 unit?
- A: To determine the correct replacement lamp, follow these steps:
- Remove the lamp’s protective glass cover (Figure #1).
- Identify the lamp shape in Figures 2 and 3.
- Match the lamp shape with the G940120 – G9 Base 40 W – 120 VAC(Part # 210-0317) model.
- Q: What precautions should I take when handling the replacement lamp?
- A: When handling the replacement lamp, it is important to:
- Use a soft clean cloth to avoid leaving fingerprints or greasing the lamp.
- Ensure the ALX2 unit is turned off and unplugged from the power source.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>