Health o meter BCS-G6 Series Body Composition Scale Instructions
- July 25, 2024
- Health o meter
Table of Contents
Health o meter BCS-G6 Series Body Composition Scale
Product Information
Specifications:
- Model: XYZ Scale
- Capacity: Up to 10kg
- Accuracy: 0.1g
- Power Supply: AC Adapter
- Display: LCD
Product Usage Instructions
Caution: Disconnect the scale from the power supply prior to cleaning the unit.
- Clean all external surfaces with a clean damp cloth or tissue. Mild antimicrobial or antibacterial soap and water solution may be used. Dry with a clean soft cloth.
- Do not immerse the scale into cleaning or other liquid solutions.
- Do not use Isopropyl Alcohol or other solutions to clean the display surface.
- Do not use abrasive cleaners.
Power Status LED:
The Power Status LED is an indicator that shows the status of the scale’s internal computer. To avoid damage to the operating system, follow these steps
- Never disconnect the power supply from the scale while the LED is ON or FLASHING.
- Switch the scale off with the ON/OFF switch and wait for the LED to turn off before disconnecting the power supply from the scale.
FAQ
Q: Can I use harsh cleaners to clean the display surface?
A: No, it is recommended not to use Isopropyl Alcohol or abrasive cleaners on the display surface as it may damage the unit.
Q: How should I clean the scale?
A: Clean external surfaces with a clean damp cloth or tissue using mild antimicrobial or antibacterial soap and water solution. Do not immerse the scale in liquid solutions.
Calibration
For Calibration instructions, please contact Health o meter® Professional
Scales Customer Service at
1-800-815-6615.
Zero Calibration
Press 0 when scale is idle to reset any zero offset.
Cleaning
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Caution: Disconnect the scale from the power supply prior to cleaning the unit.
ATTENTION – WARNING
Power Status LED is an indicator that shows the status of scale’s internal computer. To avoid damage to the operating system, never disconnect the power supply from the scale while the LED is ON or FLASHING. Switch the scale off with the ON/OFF switch and wait for the LED to turn off before disconnecting the power supply from the scale.
- Clean all external surfaces with a clean damp cloth or tissue. Mild antimicrobial or antibacterial soap and water solution may be used. Dry with a clean soft cloth.
- Do not immerse the scale into cleaning or other liquid solutions.
- Do not use Isopropyl Alcohol or other solutions to clean the display surface.
- Do not use abrasive cleaners.