Ascona 040-K Relax Bed Instruction Manual
- August 15, 2024
- Ascona
Table of Contents
Ascona 040-K Relax Bed
Specifications
- Bed Type: Basic Configuration
- Side Bars: 040-, 050-, 280- (model indicated on the product label)
- Version: 12 from 06.05.2024
- For Sidebars Types: 040-K, 050-K, 280-K
Product Usage Instructions
Package Contents:
Package 1:
- Backrest x1
- Cover for side bars (*for beds with removable cover) x1
- Instructions for use (certificate) x1
Package 2:
- Lateral sidebar x2
- Middle sidebar x1
- Assembly instructions x1
- Fabric sample (sewed in the cover for sidebars) x1
Package 2 Accessories Pack:
- Screw 6*20 (KF01) x32
- Furniture angle piece 14014090 (KF23) x4
- Furniture angle piece 14014090 (KF175) x4 (only for bed Mira)
- Angle piece 30*52 L-120 oval black (KF20) x2
- Screw 8*50 (KF145) x14
Package 3 Bed Base + Fittings:
- Legs (variant depends on bed model)
- Bed base (R01)
- Slat (RF13) x1 set
- Slat holder (RF11) x1 set of 4 pieces
Assembly Instructions:
Follow the provided assembly instructions carefully to assemble the bed of basic configuration with the specified side bars. Ensure all parts are securely attached.
Legs Assembly:
Refer to the Legs Delivery list to determine the legs variant required for your bed model. Complete set information is available on the label of the Accessories Pack. Assemble the legs according to the provided instructions.
FAQ
- Q: How do I know which legs variant to use for my bed model?
- A: Refer to the Legs Delivery list provided with the product to identify the legs variant suitable for your specific bed model.
- Q: Are the assembly instructions easy to follow?
- A: Yes, the assembly instructions are detailed and easy to follow, ensuring a smooth assembly process for the bed.
Packing List of the bed
Packing set for legs
(may be packed separately – beds Star, Star Grand, Twist, Twist Grand)
Prior to assembly
- Check all the parts for any damage before assembling. Any claim for them on the assembled article is not accepted by the Manufacturer. The package shall be kept until the end of the assembly process.
- When revealing any defect or incompleteness in the process of assembling, the package shall be kept until a representative of the trading company arrives. Assembly and operation Instructions shall be kept during all the entire period of exploitation.
- Check the parts and accessories quantity against the list. The manufacturer retains the right to make structural changes into the article and change accessories and metalware for analogous that do not affect design and do not influence on functional properties of the article. If incompleteness or any damage, mark absent part number and inform the store to replace it.
- Maintain the assembly order given in these instructions! If the Assembly and Operation Instructions are not followed the manufacturer’s warranty obligations are removed.
- To install sofa/armchair-bed/bed a flat floor zone shall be chosen! If the floor are curved may present deviations in the functioning of the transformation mechanism of sofa/armchair-bed/bed, and distortions of the article form. Any carpet presence is undesirable, because it makes the transformation process difficult.
- Perform the sofa/armchair-bed/bed assembly by two. Move all the parts gently without any jump, place them steady, escape their falls and hits!
- Move furniture and their parts only slightly lifted. This will allow to exclude any deformation or damage.
For assembling required
Read User Manual Online (PDF format)
Loading......