Ascona A5 180×200 cm Naomi Bed Installation Guide

: July 20, 2024
: Ascona

Table of Contents

Packing List of the bed
Prior to assembly:
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Ascona A5 180×200 cm Naomi Bed Installation Guide

Packing List of the bed

Package	Part	Part number	Name	Quantity
Package №1		К01	Backrest	1
К09	Cover for side bars(*for beds with removable cover and side bars
completely upholstered with technical fabric)	1
	Instructions for use (certicate)	1
Package №2		К02	Lateral side bar	2
К03	Intermediate side bar	1
	(sewn in Fabric sampleside bar)the cover or the	1
Package №2 Accessories pack			Assembly instructions	1
KF01	Screw М6*20	20
KF23	Side bars angle piece	2
	KF22	Backrest angle piece	2
Leglets variant depends on a bed model that is represented as a sample in
showroom or on the website. (See Legs Delivery list)	1 set
Package №3		R01	Bed base	1

Legs variant depends on bed model that is represented as a sampling showroom or on the website.
Complete set is shown on the label of Accessories Pack

Package	Part	Part number	Name	Quantity
Legs complete set №1		KF54	Leg for beds №1156 chrome h-150 (pin 8mm)

2
| KF39| Nut М8| 2
| Kf40| Washer М8| 2
Legs complete set №2| | KF31| Leg wooden h-97 corner| 2
| KF39| Nut М8| 2
| KF81| Glide self-adhesive felt 20х20| 4
Package| Part| Part number| Name| Quantity
---|---|---|---|---
Legs complete set №3| | KF45| Leg for beds h-60 verge (M10)| 2
| KF46| Decorative nut| 2
| KF81| Glide felted 20х20| 2
Legs complete set №4| | KF41| Leg decorative h-130 chrome| 2
| KF43| Screw M8x20 DIN 967| 2
| KF42| Washer М8| 2
| KF39| Nut М8| 2
| KF81| Glide felted 20х20| 2
Legs complete set №5| | KF55| Leg for beds 178 h-50 chrome| 2
| KF39| Nut М8| 2
| KF40| Washer М8| 2
Legs complete set №6| | KF69| Leg for beds h-120| 2
| KF37| Decorative nut| 2
Legs complete set №7| | KF77| Leg for beds h-100 chrome| 2
| KF39| Nut М8| 2
| KF40| Washer М8| 2
Legs complete set №8| | KF140| Leg conical 6060195 pin M8| 2
| KF144| Nut М8| 2
| KF81| Glide felted 20х20| 2
Legs complete set №9| | KF130| Leg conical 6045120 pin M8| 2
| KF144| Nut М8| 2
| KF81| Glide felted 20х20| 2

Prior to assembly:

Check all the parts for any damage before assembling. Any claim for them on assembled article is
not accepted by Manufacturer. Package shall be kept until the end of assembly process.
When revealing any defect or incompleteness in the process of assembling, the package shall be kept until arepresentive of trading company arrives. Assembly and operation Instructions shall be kept during all the period of exploitation.
Check the parts and accessories quantity against the list. Manufacturer refains the right to make structural changes into the article, change accessories and metalware for analogous that do not affect design and do not influence on functional properties of the article. If incompleteness or any damage. mark absent part number and inform the store to replace it.
Maintain the assembly order given in these instructions! If the Assembly and Operation Instructions are not followed the manufacturer’s warranty obligations are removed.
To install sofa/armchair-bed/bed a flat floor zone shall be chosen! If the floor are curved may present deviations in the functioning of transformation mechanism of sofa/armchair-bed/bed, distortions of the article form. Any carpet presence is undesirable, because it makes transformation process difficult.
Perform the sofa/armchair-bed/bed assembly by two. Move all the parts gently without any jump.
place them steady, escape their falls and hits!
Move furniture and their parts only slightly lifted. This will allow to exclude any deformation or damage.