UGREEN CD186 Wireless Charger User Manual
- June 6, 2024
- UGREEN
Table of Contents
Wireless Charger
Model CD186 P/N: 80537
Product Overview
- Power port
- Wireless charging area
- Indicator
- USB charging cable
Instructions
Supply Power to the Charger
**** Connect the product to a power supply unit via provided USB charging
cable (as shown 0). Once connected, the indicator blinks green twice and then
turns off.
Charge the Cellphone
Place your cellphone in the wireless charging area (as shown®). Operating
normally: indicator glows solid green. Operating abnormal: indicator blinks
green always.
**Specifications
**
| Model | CD186 |
|---|---|
| Input | 5V=2A 9V-2A 12V=2A |
| Output | 15W max, compatible with 10W, 7.5W and 5W |
**Package contents
**
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference;
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
The equipment complies with the IC Radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
FCC Radiation Exposure Statement
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, (2) this device must accept any interference received, including
interference that may cause undesired operation. Warning: Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator & your body.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference; (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
| SELECT | V | SCALE 1:1 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dim TOL. | A | B | C | EPS | EPE | EPP | BAG | CTN | LABEL | |
| 0-6 | 0.05 | 0.05 | 0.10 | 0.20 | ||||||
| 6-30 | 0.10 | 0.15 | 0.20 | 0.50 | 0.50 | 0.50 | 3.00 | – | 0.20 | SHEET 1/1 |
| 30-120 | 0.15 | 0.20 | 0.30 | 0.50 | 0.50 | 0.50 | 5.00 | 1.00 | 0.25 | |
| 120-300 | 0.20 | 0.30 | 0.40 | 1.00 | 1.00 | 1.00 | 10.00 | 1.00 | 0.30 | UNIT |
mm
300-450| 0.25| 0.40| 0.50| 2.00| 2.00| 2.00| 15.00| 2.00| 0.50
450-600| 0.30| 0.50| 0.60| 3.00| 3.00| 3.00| 20.00| 3.00| 0.80|
DRAFT TOLERANCE| ± 0 20°| CRITICAL DIM. MARK| *|