TAGRY K08 Open Ear Sport Headphones User Manual

TAGRY K08 Open Ear Sport Headphones

Product Usage Instructions

• Prior to first use, remove the protective film from the earbuds.
• Insert the earbuds into the charging case and connect both to a power source using the provided Type-C charging cable. Allow them to charge for at least 10 minutes.
• Adjust the earbuds to the most comfortable position once they are properly inserted.
• Clean your earbuds regularly using a pointed cotton swab. Also, clean the charging contacts and protective grille regularly for optimal performance.
• Open the charging case and take both earbuds out. They will enter pairing mode.
• Access Bluetooth settings on your device, and select K08 from available devices to initiate the connection.

Customer Service

• Web: www.tagry.shop
• If you have any problems with your earbuds, please do not hesitate to contact us to solve your problem.

Packing List

Product Overview

First Time Using

1. Prior to first use, please ensure to remove the protective film from the earbuds.
2. Insert the earbuds into the charging case and connect both the earbuds and the charging case to a power source using the provided Type-C charging cable. Allow them to charge for at least 10 minutes, especially if they haven’t been used for an extended period. It is crucial not to remove the earbuds from the case while they are being charged.

Correct Wearing

• Please refer to the diagram below to ensure the correct positioning of the earbuds for optimal comfort:

• Adjust the earbuds to the most comfortable position once they are properly inserted.

Specifications

• Model No.: K08
• Input: 5V 1A
• Charging Case Capacity: 400mAh 3.7V, 1.48Wh
• Earbuds Capacity: 85mAh 3.7V, 0.315Wh
• Bluetooth Version: Bluetooth 5.3
• Earbuds Battery Life: 13.5hours on a single charge
• Transmission Range: 33ft/10m

Maintenance

Care for earbuds

Please clean your earbuds regularly using a pointed cotton swab for optimal performance and hygiene.

• Refer to the image right for instructions on how to clean the charging contacts regularly.
• Refer to the image right for instructions on how to clean the protective grille regularly.

Regular cleaning of both the charging contacts and the protective grille will help maintain the quality and functionality of your earbuds.

Care for Charging Case

1. Please ensure to regularly charge your K08 charging case using the included Charging Cable and a charger (not included).

• Additionally, it is recommended to clean the charging pins of the case regularly using a pointed cotton swab.

Regular charging and cleaning of the charging pins will help maintain the functionality and performance of your K08 charging case.

Pairing and Connection

Stereo Mode

Open the charging case and take both earbuds out. The earbuds will automatically enter the pairing mode.

• During pairing mode, the LED indicator light on the earbuds will flash red and blue alternately.
• If your earbuds are in the standby state, waiting to connect but fail to do so within 5 minutes, they will automatically power off. In such cases, you can manually power them on by tapping and holding each earbud for 2 seconds.

To connect your earbuds to your device, please proceed with the following:

1. Access the Bluetooth settings on your device.
2. From the list of available devices, select “K08” to initiate the connection.
3. Once successfully connected, you will hear a prompt saying”connected.”

Mono Mode
To use only one earbud, follow these steps:

1. If you wish to use a single earbud, simply take out one earbud from the charging case.
2. To transition from using both earbuds to using only one earbud, follow these steps: When you want to switch from using both earbuds to using only one earbud, place one of the earbuds back into the charging case.

Friendly Reminder

After the initial pairing, the K08 earbuds will remember the first device they were paired with. When you take out the earbuds from the charging case and your first device is nearby, they will automatically reconnect to it. To pair the earbuds with a new device, you can follow either of the two methods below:
If the initial device is out of range or more than 33 feet (10 meters) away, simply take out the earbuds and pair them with the new device.
If the initial device is within range, refer to the diagram below to disconnect the earbuds from it. Then, take out the earbuds and pair them with the new device.

First Device

Second Device

Smart Touch Control

Music Control

Music Control

Play/Pause

| Double tap R/L earbud
---|---
Previous Music Track| Triple tap on “L” earbud
Next Music Track| Triple tap on “R” earbud
Volume Up| Long tap on “R” earbud
Volume Down| Long tap on “L” earbud
Voice Assistance| Triple tap on “R” or “L” earbud (Pause music first)
Exit Voice Assistant| Triple tap on “R” or “L” earbud
Phone Calls Control

Answer/End Call| Double tap on “R” or “L” earbud
Reject Call| Long tap on “R” or “L” earbud for 2s
Power On/Off

Power on| Method 1: Just pick up the earbud from the charging case

Method 2: Long tap on earbud for 2s

Power off

| Method 1: Just place earbuds back into the charging case Method 2: Long tap on earbud for 5s (this method is just for earbuds that have disconnected from the device)

How to Reset

1. Take both earbuds out of the charging case.
2. Ensure that both earbuds are disconnected from any devices.
3. Simultaneously touch the R (right) and L (left) earbuds five times at the same time.

How to sync volume with Android Devices?

1. Find “Settings” on your phone
2. Enable “Bluetooth”
3. Pairing and connecting with your “K08”
4. Then click the “set” button on the right of “K08” on the bluetooth list
5. Then enable”Sync volume with phone”

Charging

Earbuds Charging

1. Just place the earbud into the charging case, and then the earbud will be charged. The indicator light of the earbud is red, once the earbud is fully charged, the red light will disappear.

Charging Case Charging

• Fully dry off the charging cable and the USB port before charging.
• Use a certified charger and the USB C cable we provided to prevent any damage.
• Please use the provided USB C cable to connect the charging case to the power supply

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FAQ

• Q: What should I do if the earbuds do not charge when I put the earbud into the case?

• A: First, ensure that the charging case has sufficient power. If not, please charge the case first.

  • If the case has enough power, carefully inspect the charging contacts and the pins inside the charging case for any dirt or dust. If you notice any buildup, use a pointed cotton swab dipped in alcohol to clean the charging contacts and pins.

• Q: Why are earbuds disconnected with the device or sound is cut in/out?

• A: Please note that encountering connectivity issues does not necessarily indicate a problem with the earbuds themselves. It could be due to factors related to the connected device and the surrounding environment. Bluetooth signals can be affected by obstacles such as walls, pillars, home appliances, Wi-Fi signals, and more. To ensure a stable connection, we recommend avoiding such obstructions. To address this issue, please try the following steps:

  • Make sure to fully charge your earbuds and reset them as described earlier. Then, re-pair them with your device.
  • Test the earbuds by playing a downloaded song or video to check if the audio is clear and consistent.
  • Verify the performance of the earbuds by connecting them to another Bluetooth device in a different environment to see if they function properly.

• Q: Why am I unable to adjust the volume of the earbuds by tapping and holding either the left or right earbuds?

• A: Please note that this doesn’t necessarily mean there is an issue with the earbuds. Our K08 earbuds are set at”when you pause music, you can not adjust the volume via a long tap on either earbud”.If you still want to adjust the volume at this status, there are 2 methods below
  Method 1: Adjust the volume via the ” Volume Button” on your phone.
  Method 2: Please play music again, and then you can adjust the volume via a long tap on the right or left earbud.
  If neither of the methods proves effective, please contact us via support@tagry.shop for a replacement.

• Q: Earbuds can not pair with my new device, why?

• A: Please make sure that the K08 headphones are disconnected from your previous paired device before pairing them with your new device, and ensure that the K08 headphones have sufficient battery.
  Please ensure that your new device has Bluetooth functionality.
  If both of the above conditions are met, but the K08 headphones still cannot connect to your new device, please follow the steps below to reset your K08:

  • Take out both K08 earbuds from the charging case.
  • After removing the earbuds, make sure they are not connected to any device, then click both earbuds five times simultaneously.
  • After completing the above steps, place both earbuds back into the charging case, then take them out again. At this point, both earbuds have been reset. Please proceed with the pairing process to connect them to your device.
  • If you still cannot connect your K08 headphones to your new device after resetting, please scan the QR code to contact us, and we will assist you in resolving the issue.

• Q: The sound of the earbuds is so low, how to fix it?

• A: Please ensure that both your headphone volume and your phone volume are set to the maximum level.

If your phone volume and headphone volume are synchronized and set to the maximum level, it indicates that the grille is dirty. Please refer to the diagram right and use a pointed cotton swab (not included) to clean the grille.
If the sound remains low despite following the above steps, please scan the QR code to contact us, and we will assist you in resolving the issue.

Please kindly scan the QR code to activate the lifetime warranty of your earbuds within 15 days. www.tagry.shop.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>