Lexicon 194840227984 Janwood Wall-Hugger Power Reclining Chair Instruction Manual

Lexicon 194840227984 Janwood Wall-Hugger Power Reclining Chair

Product Information

Specifications

• Item No: 194840227984
• Product: Power Reclining Chair
• Components:
  1. Seat (A)
  2. Back Rest (B)
  3. Plug with Wire (C)

Product Usage Instructions

Assembly Instructions

The plug with wire is stored in the bottom of the seat. Please take it out before assembly. Do not use power tools for assembly as it may lead to over tightening and damage.

Step 1: Attach Back Rest to the Seat

Attach the Back Rest (B) to the Seat (A) as per the provided drawing.

Step 2: Attach Plug with Wire to the Power Switch

To operate the chair:

• Ensure the switch is off before connecting the wire.
• Connect the wire to the switch located at the lower back of the seat.
• Plug in the chair to an outlet and switch on to operate the power chair.
• Always turn off the switch and unplug before moving or adjusting the chair.
• Avoid modifying electrical parts or using extension cords to prevent damages or injuries.

Step 3: Completion

Ensure all components are properly attached and secured.

Care Instructions for Polished Microfiber Furniture

In order to maintain the original appearance of your Polished Microfiber furniture, please follow these care procedures:

• Avoid pinching the electrical cord between moving parts or between the frame and the floor.
• Do not place the cord under carpet or in locations where it could become worn.

FAQ

Q: Can I use power tools for assembly?

A: No, it is recommended not to use power tools for assembly to avoid over tightening and potential damage to the product.

Q: What should I do before moving the chair?

A: Always turn off the switch and unplug it before moving or adjusting the chair to ensure safety and prevent any accidents.

ITEM NO : 194840227984

POWER RECLINING CHAIR

The plug with wire stored in the bottom of the seat, please take out of assembly.
NOTE: Do not use power tools for assembly. Power tools increase the risk of over tightening which leads to splitting or cracking the wood.

COMPONENT LIST (CHAIR)

ASSEMBLY INSTRUCTION

STEP# 1
Attach Back Rest (B) to the Seat(A)

STEP# 2 Attach Plug with Wire(C) to the Power Switch

To operate the chair:

• Make sure the switch is off before you plug/connect the wire.
• Connect the wire to the switch which locate at the lower back of the seat, plug in to the outlet. Switch on to operate the power chair.
• Please always turn off the switch and unplug it before you move or switch the chair.
• Do not modify the electrical parts or use extension cord, improper usage may cause damages or injury.

STEP# 3 Completed

Care Instruction for Polished Microfiber Furniture

In order to maintain the original appearance of your please follow below simple care procedures:

• Avoid exposing furniture directly to sunlight or heating and air conditioning outlets. Sunlight and/or exposure to heating and air conditioning outlets will fade/damage polished microfiber.
• Do not place your upholstered furniture too close to windows, radiators, or vents and be sure to use window, radiators, or vents.
• Vacuum or wipe with a soft brush to remove dust.
• For items used on wooden floor, hard surfaces or carpets, it is recommended to install protective pads
• under all legs supports to avoid/prevent from damages/scratches discoloration.

Warning
Do not allow electrical cord to be pinched between moving parts or between the frame and the floor. Do not place cord under carpet or in location where it could become worn.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>