TAGRY X07 True Wireless Sports Headphones User Manual

June 13, 2024
TAGRY

TAGRY X07 True Wireless Sports Headphones

True Wireless Sports Headphones

Packing List

  • Charging Case x1
  • Earbuds x2
  • Type-C Cable x1
  • Ear Tips x3 (S, M, L)
  • User Manual x1

Product Overview

  • Model No.: X07
  • Support Profile: HSP/HFP/AVRCP/A2DP
  • Battery Level Display of Charging Case
  • Charging Status of L & R Earbud
  • Transmission Range: 33 feet (Without Obstacles)
  • FCC ID: 2A58W-G17
  • Charging Cord Type: Type-C
  • Input: 5V 1A

Product Parameters:

  • Charging Case: 600mAh 3.7V, 2.22Wh
  • Earbuds: 50mAh 3.7V, 0.18Wh
  • Weight: 0.22 lb
  • Size: 4.22.81.3 in

Product Usage Instructions

First-Use:

  1. Before the first use, please tear off the isolation film on each earbud. Put both earbuds into the charging case, then use the USB-C cable to charge the case and earbuds for 1 hour. Please charge the earbuds in time when they are low on battery.
  2. These earbuds are installed with M-size ear tips. Please select the suitable one according to your ears to get a better sound experience.

How to Wear:

  1. Choose suitable ear tips (S, M, L).
  2. Adjust earbuds downwards to a proper position and push them into your ears.
  3. Slightly adjust the earbuds to fit you best.

Power On / Off:
Auto Power On / Off:

  • Auto Power On  Take the earbuds out from the charging case, they will automatically power on and enter pairing mode.
  • Auto Power Off: Put the earbuds into the charging case, they will power off and disconnect automatically.

Note : These earbuds will power off automatically if they don’t connect to any device within 5 minutes.

Manual Power On / Off:

  • Manual Power On  Long press either earbud for 2 seconds, then the earbud will power on.
  • Manual Power Off  Long press either earbud for 5 seconds, then the earbud will power off.

Note : This method only works when the earbuds are disconnected from the device.

How to Pair:
Method 1:

  1. Pick up two earbuds from the charging case. They will power on and pair with each other automatically. You will hear a prompt “power on” and the light on the earbuds will flash white and red alternately.
  2. Turn on your phone’s Bluetooth, search for “X07” and click to pair. Once connected successfully, you will hear a prompt “connected” and the light on the earbuds will be off.

Method 2:
In the disconnected state, the earbuds will enter pairing mode automatically.

Single Mode:

  1. When both earbuds are in use, please put one earbud into the case to switch to single mode.
  2. When both earbuds are in the charging case, please just take one earbud out to switch to single mode.

Notice:

  1. If both earbuds do not connect with your device, they will auto power off after 5 minutes when they are powered on and in pairing mode.
  2. After the first pairing, the earbuds will remember the last connected device. The second time you take out the earbuds from the charging case, they will auto-reconnect.
  3. After the first pairing, if you want X07 to pair with a different device, please forget X07 on your previous device, then you can use X07 to connect with other devices.

Packing List

Note : The ear tips for M size are on the earbuds already.

Product Overview

Note : Please remove the protective films of the earbuds’ charging point before using it.

Product Parameters

  • Model No.: X07
    Support Profile: HSP/HFP/AVRCP/A2DP

  • Transmission Range: 33feet(Without Obstacles)

  • FCC ID: 2A58W-G17
    Charging Cord Type: Type-C

  • Input: 5V-1A

  • Charging Case: 600mAh 3.7V, 2.22Wh

  • Earbuds: 50mAh 3.7V, 0.18Wh

  • Weight: 0.22 lb

  • Size: 4.22.81.3 in

First-Use

  1. Before the first use, please tear off the isolation film on each earbud. Put both earbuds into charging case, then use USB-C cable to charge the case and earbuds for 1H. Please charge the earbuds in time when they are in low battery.
  2. These earbuds are installed with M-size ear tips. Please select the suitable one according to your ears to get a better sound enjoying.

How to Wear

  • Step 1 Choose suitable ear tips.
  • Step 2 Adjust earbuds downwards to a proper position and push earbuds into your ears.
  • Step 3 Slight adjust earbuds to fit you best.

Power On / Off

Auto Power On /Off
Anto Power On

  • Take the earbuds out from the charging case, they will auto-power on and enter pairing mode.

Auto Power Off

  • Put the earbuds into a charging case, they will power off and disconnect automatically. Note : These earbuds will power off automatically if don’t connect any device within 5 minutes.

Manual Power On

  • Long press either earbud for 2s, then the earbud will power on.

Manual Power Off

  • Long press either earbud for 5s, then the earbud will power off.

Note : This method only works when the earbuds are disconnected with the device.

How to Pair

Method 1:

  1. Pick up two earbuds from the charging case.
    They will power on and pair with each other automatically.

  2. Turn on your phone bluetooth, search “X07″ and click to pair. Once connected successfully you will hear a prompt” connected ” and the light on the earbuds will be off.

Method 2:
In the disconnected statement, the earbuds will enter pairing mode automatically.

Single Mode

  1. When both earbuds are in use, please put one earbud into the case, you can get the single mode.
  2. When both earbuds are in the charging case, please just take one earbud out, you can get the single mode.

Notice:

  1. If both earbuds do not connect with your device, earbuds will auto power off after 5mins, when earbuds are powered on and in pairing mode.
  2. After first pairing earbuds will memorize the last connection device, the second time when you take out the earbuds from the charging case, the earbuds will auto-reconnect.
  3. After first pairing, if you want “X07” to pair with a different device, please forget “X07” on your previous device, then you can use “X07” to connect with other devices.

Music Control

  • Pause/Play: Once click (L/R)

  • Volume Adjustment:
    (In play mode or call mode) Volume +﹕ Long press R earbud Volume – : Long press L earbud

  • Previous Track:
    Double click L earbud

  • Next Track:
    Double click R earbud

Multi-Function Operations

Phone Calls Control

  • Answer/End Call:
    Once Click L/R
    Reject Calls:
    Long Press 2s

Note : Each earbud bulid-in microphone can be used individually or simultaneously.

Voice Assistance

  • Activate Voice Assistance: Quick Triple Click L/R
  • Turn off Voice Assistance: Quick Triple Click L/R

Earbuds Charging

To Charge Earbuds
Insert earbuds into the charging case properly, they will power off & get charged automatically.

Low Battery Alarm
When the earbud’s battery is below 10%(and the voltage is below 3.4V), a voice “Low Battery, Please charge” will be prompted once per minute, 5 times in total. Finally, the earbuds will turn off normally.
Note : Please clean and dry up the earbuds before putting them into the charging case.

Charging Case Charging

  • There is a Type-C USB charging cable in the package, please use it to charge the case directly.
  • During charging, the digital display will flash and show the battery in real-time. The indicator light outside of the case will be red.
  • After being fully charged, the number is displayed as 100. And the indicator light will be off.

Note : The right display panel indicates the charging status per earbud. There are separated power consumption indicators by 4 grids in total, the indicator light will always flash during charging.

Battery Warning

Using the wrong battery can cause fire and other hazards (for example, in the case of some lithium battery types).

  1. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
  2. Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
  3. A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.

Storage and Maintenance

  1. If the earbuds have been unused for more than 3 months, we recommend that you charge them.
  2. Please use chargers that are FCC (Federal Communications).
  3. Do not disassemble earbuds.
  4. Adult supervision is required for children aged 6 and under.
  5. Do not expose earbuds to high or low temperatures, do not use the earbuds in thunderstorms storm. Avoid falling or violent impact of the device. Keep the device away from fire, do not put.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Trouble Shooting Guide

You can refer to the following solutions. If you cannot solve them, please contact us by email, and we will support you throughout

  • Q: Why these earbuds can not pair with my phone?
    A: Please make sure the earbuds are fully charged and powered on.
    Please make sure the bluetooth of your phone is turned on.
    If the above 2 points have no problem, please put the earbuds into the case again and close the case, hold on for 1 minute, then pick out the earbuds from the charging case and reconnect the earbuds with your phone.
    Please note, that the earbuds will connect with your last device automatically. If you need to pair with a new device, please forget the earbuds from your previous device’s bluetooth list.

  • Q: Why does the music cut in or cut out?
    A: Please don’t let the distance between these earbuds and your phone be more than 33 feet (without obstacle)
    If the distance is less than 33 feet, please check the below steps:

1. Put earbuds into the charging case and forget “X07” on your phone bluetooth list.
2. After 1 min, take the earbuds out of the charging case.
3. Search “X07” at your phone bluetooth and click to reconnect.
  • Q: How can i do when the earbuds can’t be charged?
    Please check if the earbuds are out of battery. If yes, please use a USB-C cable to charge it. It will take about 2.5 for fully charge.
    If not about the battery, please check the earbuds as below details:
1. Check whether there is dirty in the charging pins of the earbuds and the charging case. Use a fine cotton swab dipped in a small amount of alcohol, and wipe the charging pins of the earbuds and case.
2. Whether the earbuds can be turned on normally.
3. Whether the charging case is charged and whether the charging case can be charged.
  • Q: Poor sound quality, how to deal with this issue?
    A: ① Please choose the suitable ear-tips already, and rotate to a comfortable angle to your ear.
    ② The earbuds may be dirty. Please use a fine cotton swab dipped in a small amount of alcohol to wipe the mesh of the earbuds.

www.tagry.net
Thank you for purchasing the authentic product. Please scan the QR code to activate the lifetime warranty.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals