SUNLU M3 GK2 3D Printer User Guide
- July 23, 2024
- SUNLU
Table of Contents
SUNLU M3 GK2 3D Printer
Product Specifications
- Brand: SUNLU
- 3D Printer Brand: Anycubic
- Model: M3 GK2
- Layer Height: 0.05mm
- Bottom Layer Count: 8
- Exposure Time: 3s
- Bottom Exposure Time: 30s
- Transition Type: Linearity
- Bottom Lift Distance: 8mm
- Lifting Distance: 8mm
- Bottom Retract Distance: 8mm
- Bottom Lift Speed: 60mm/min
- Lifting Speed: 60mm/min
- Bottom Retract Speed: 120mm/min
- Retract Speed: 120mm/min
Product Usage Instructions
Preparing the Printer
Make sure your Anycubic M3 GK2 printer is set up and calibrated properly according to its user manual.
Loading the Resin
Open the resin container carefully and pour the SUNLU Resin Plant resin into the designated resin tank of the printer.
Setting Printing Parameters
Adjust the printer settings to match the provided parameters such as layer height, exposure time, lift distances, and speeds.
Initiating Printing
Select or upload your desired 3D model to the printer’s software and start the printing process.
Photosensitive Resin printing parameter setting
guide
Photosensitive Resin printing parameter setting guide
SUNLU Resin
|
Brand of 3D printer
|
Model of the printer
|
Layer Height
|
Bottom Layer Count
|
Exposure Time
|
Bottom Exposure Time
|
Transition Layer Count
|
Transition Type
|
Waiting Mode During Printing
|
Rest Time Before Lift
|
Rest Time After Lift
|
Rest Time After Retract
|
Bottom Lift Distance
|
Lifting Distance
|
Bottom Retract Distance
|
Retract Distance
|
Bottom Lift Speed
|
Lifting Speed
|
Bottom Retract Speed
|
Retract Speed
Plant resin
|
Anycubic
|
M3
|
0.05mm
|
8
|
3s
|
30s
|
8
|
linearity
|
Rest time
|
0s
|
0s
|
0.5s
|
8mm
|
8mm
|
8mm
|
8mm
|
60mm/min
|
60mm/min
|
120mm/min
|
120mm/min
UniFormation
|
GK2
|
0.05mm
|
8
|
3s
|
30s
|
8
|
linearity
|
Rest time
|
0s
|
0s
|
0.5s
|
8mm
|
8mm
|
8mm
|
8mm
|
60mm/min
|
60mm/min
|
120mm/min
|
120mm/min
Frequently Asked Questions
Q: How do I clean the resin tank after printing?
A: After printing, carefully remove the printed object and clean the resin tank with isopropyl alcohol to remove any residue.
Q: Can I use other brands of resin with this printer?
A: It is recommended to use SUNLU Resin Plant resin for optimal results, but you can try other compatible resins after adjusting the settings accordingly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>