SUNLU S2BK Fila Dryer S2 Instruction Manual

: June 1, 2024
: SUNLU

Table of Contents

SUNLU S2BK Fila Dryer S2
Product speciﬁcations
Product function diagram
Operation Guide
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SUNLU S2BK Fila Dryer S2

Product Specifications:

Product Size: 265 (L) X 274 (W) X 118 (H) mm
Maximum Capacity: 210 * 85 (H) mm
Net Weight: Not specified
Working Environment Temperature Setting Range: Not specified
Power Adapter Specifications: DC 24V 2A
Standby Power: Not specified
Maximum Working Current: Not specified
Maximum Working Power: Not specified
LCD Display Screen: Yes
Suitable for Filament Diameters: Not specified

Product Function Diagram:
Display Control Panel LED Light Circle
DC Power Socket (24V 2A)
Schematic Diagram of the Content Displayed on the LCD:

Measured Temperature
Measured Humidity
Cursor Column PV: SV: Time: CF % RH Temperature Setting CF Drying Time Touch Button Material
LED: OFF ON RUN SET ON OFF www.3dsunlu.com Selection of Drying Materials Working Mode of LED Heating Film Port Thermistor Port DC24V 2A Port

Operation Guide:

Power On: Plug in the power adapter and connect the power cord to the DC power socket.
Filament Loading: Place filament in the dryer, pull the thread out, and close the lid securely.
Turn On the Dryer: Double-click ON to activate the dryer.
Personalized Settings:
Change temperature unit.
Increase or decrease temperature.
Set drying time.
Switch between different filaments and adjust drying temperature accordingly.
Turn Off the Dryer: Double-click OFF to shut down the dryer.

FAQ:
Q: What are the recommended baking temperatures and times for **different materials?
A:**

PLA/PLA+: Not specified
WOOD: Not specified
PETG: Not specified
PVB: Not specified
ABS/ABS+: Not specified
HIPS: Not specified
PVA ASA TPU PMMA: Not specified

Zhuhai Sunlu Industrial Co. , Ltd.
Oﬃcial website: www.3dsunlu.com
Brand cooperation: [email protected]
Business cooperation: [email protected]
After-sales service: [email protected]
Address: 38,Yongtian Road,Fuxi Industrial Zone, Xiangzhou District,Zhuhai Guangdong,China.

MADE IN CHINA
Note: Read this document before using the ﬁlament dryer

Do not place the product where children can reach.
Pay attention to electrical safety during operation. Do not use this product near water, such as in the bathroom, bathtub, wash basin and other places where water is easily accessible.
Only use the original power adapter or a fully certiﬁed 24V/2A power adapter.
Switch oﬀ the power supply when not using this product to avoid sudden ﬁre.
Place the two rollers in the box before operating the dryer.
Conﬁrm ﬁlament tightly wound to the roll before using this product to prevent it from falling onto the heat sink, resulting in high temperature deformation of the ﬁlament.
When drying ﬁlament, do not place the products on temperature sensitive objects.
Do not touch the heaters in the oven when drying ﬁlament to avoid burns.
The upper lid of the drying oven should be covered when drying consumables to avoid heat loss.
In order to ensure the drying eﬀect, do not open the drying box at will during operation.
If there is a fault with the product , disconnect the power adapter from the ﬁlament dryer and the electrical socket then contact the after-sales support team.

Product speciﬁcations

Product size	265 (L) X 274 (W) X 118 (H) mm
Maximum capacity	φ210 * 85 (H) mm
Net weight	1190g (including power adapter)
Working environment	a) Environment temperature: 20 ℃ ~ 35 ℃

b) Relative humidity: ≤ 90%

Temperature setting range| 35 ℃ ~ 70 ℃
Power adapter speciﬁcations| a) Input speciﬁcations: AC 100V ~ 240V, 50 / 60Hz

b) Output speciﬁcations: DC: 24V ± 1.2V, 2A

Product function diagram

$SUNLU-S2BK-Fila-Dryer-S2-$1$$

$SUNLU-S2BK-Fila-Dryer-S2-$2$$

Schematic Diagram of the Content Displayed on the LCD:

$SUNLU-S2BK-Fila-Dryer-S2-$3$$

Operation Guide

Power On
Plug the power adapter attached to this product into the power supply, and then connect the power cord to the DC power socket of the dryer. The dryer is in standby without heating state by default after the power is connected, and the screen displays“ ”.

Filament Loading
Place the ﬁlament in the dryer, pull the thread out of the outlet and close the lid tightly. (Note: Please make sure that the consumables are in a tightly wound state).

Turn On the Dryer
Double-click the “ ”,the dryer will work according to the default settings (Temperature: 50°C, drying time: 6 hours, material: PLA, LED: OFF).

Personalized Settings

This product can change the temperature unit.
Click the “ SET ”, when the cursor on the left side of the PV ﬂashes, click , you can switch between Fahrenheit and Temperature Celsius.
This product can increase or decrease the temperature according to personal settings (temperature setting range: 35℃~70℃).
Click the “ ”SET , when the cursor on the left side of the SV ﬂashes, click , , the temperature can be increased or decreased. After 3 seconds of stopping the operation, the dryer will automatically save the set temperature.
In addittion, you can click directly without the cursor ﬂashing.
This product can be set to dry for a ﬁxed time (the default continuous drying time is 6 hours when the dryer is turned on).

$SUNLU-S2BK-Fila-Dryer-S2-$7$$

This product has preset the best drying temperature and time for a variety of commonly used ﬁlament.

Click the “ SET ”, when the cursor on the left side of the material, click can switch between diﬀerent ﬁlament. When the ﬁlament are changed, the drying temperature corresponding to the consumables will be changed as well.

$SUNLU-S2BK-Fila-Dryer-S2-$9$$

Setting of LED light ring working mode

Click the “ SET ” , when the cursor on the left side of the LED ﬂashes, click can change the working mode of LED light ring.

When in the “OFF” state, the LED light ring does not light up.
When in the “ON” state, the LED light ring presents an upward accumulation lighting eﬀect. When there is a big diﬀerence between the measured temperature and the set temperature, the LED light ring’s accumulation speed is fast; when the temperature diﬀerence gradually decreases, the accumulation speed gradually slows down; when the measured temperature is greater than or equal to the set temperature, the LED ring is always on.
When in “RUN” mode, the LED light ring will always be on.

Turn Oﬀ the Dryer
Double-click “ ” the to enter the shutdown state. After restarting, the drying temperature, ﬁlament selection, and LED mode will retain the settings before the shutdown; the drying time will be restored to the default 6 hours.

Tips for the best results

For best results dry your ﬁlament before and during printing. For long print operations drying during the printing process will produce more consistent print results.
When the ambient temperature is low the dryer will take longer to reach the set temperature, extend the drying time by 1 hour.
Drying time and temperature for common material refer to the following table:

Material| PLA/ PLA+| WOOD| PETG| PVB| ABS/ ABS+| HIPS| PVA| ASA| TPU| PMMA| PA/PC
---|---|---|---|---|---|---|---|---|---|---|---
Baking Temp| 45-50℃| 50-55℃| 60-70℃
Time| 3-6h

It’s necessary to wind the ﬁlament tightly instead of a loose state, as shown in the picture below:

$SUNLU-S2BK-Fila-Dryer-S2-$8$$

Troubleshooting

If you encounter the following issues during use, please try the troubleshooting method in the table below. If the fault still cannot be eliminated, please contact the place of purchase for troubleshooting.

Other Filament	Cause of issue	Troubleshooting method
LCD screen does not display normally

Power adapter failure

|

Replace the power adapter

The temperature does not rise

| Power adapter power is below speciﬁcation| Replace the power adapter (24V 2A)
The lid of the dryer enclosure is not closed| Close the top cover of the ﬁlament dryer
Fault code ER1| Poor temperature probe contact| Reconnect the heating element temperature probe(right 2)
Fault code ER2| Poor contact of cabinet temperature probe| Reconnect the enclosure temperature probe (right 1)

After-sales services:

Limited warranty for one year where the product has failed under normal operation as shown in this manual.
Warranty service will not be provided if the machine is damaged within the warranty period due to the use of a diﬀerent speciﬁcation power adapter or if the machine is not operated correctly according to the instruction manual.