timberk T-CMA34D61 Automatic Coffee Machine Instructions

: July 23, 2024
: TIMBERK

Table of Contents

T-CMA34D61 Automatic Coffee Machine
Specifications:
Product Usage Instructions:
1. Initial Setup:
2. Powering On:
3. Brewing Coffee:
4. Maintenance:
- Frequently Asked Questions (FAQ):
Q: How do I adjust the coffee strength?
Q: How often should I descale the machine?
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

T-CMA34D61 Automatic Coffee Machine

Specifications:

Model: T-CMA34D61
Power: 220-240V~/50Hz
Power Consumption: 1350W
Water Tank Capacity: 1.5L
Coffee Bean Capacity: 180g
Pressure: 15 bar
Dimensions: 439mm x 187mm x 318mm

Product Usage Instructions:

1. Initial Setup:

Upon unboxing, ensure all parts are included. Place the coffee
machine on a flat, stable surface near a power outlet.

2. Powering On:

Connect the machine to a power source. Press the power button to
turn it on.

3. Brewing Coffee:

Fill the water tank with fresh water and add coffee beans to the
designated compartment. Select your desired coffee strength and cup
size using the control panel.

4. Maintenance:

Regularly clean the drip tray, coffee grounds container, and
water tank. Descale the machine as recommended to maintain
performance.

Frequently Asked Questions (FAQ):

Q: How do I adjust the coffee strength?

A: Use the control panel to select the desired coffee strength
before brewing.

Q: How often should I descale the machine?

A: Descaling should be done every 3-5 months depending on usage
and water hardness in your area.

INSTRUCTION MANUAL

RU ENG KZ

…………………………………………………………………………… 2 AUTOMATIC COFFEE MACHINE ………………………………………………….. 26
…………………………………………………………………….. 49

/Model: T-CMA34D61

!

IM2024

timberk. .

. , , . , , , . . , . , , . .

! , , , . , , , , – .

, . , .

, . , .
1. .
2. , , , .
2

IM2024
3. , , , .
4. ( ) , , , .
5. , , .
6. . 7. .
. 8.
. 9.
. 10. ,
. . 11.
, , , . , , . 12. . 13. , . 14. . 15. , . 16. , . 17. , . 18. , . 19. , , , . 20. . 21. . . 22. , .
3

IM2024
23. , .
24. , . .
25. . 26.
. , : , ; ; , , . 27. . 28. , . 29. : , , , , , , . 30. , ” “. 31. . 32. 0ºC, 2 . 33. . . 34. : . 35. .
3.
, , , , , . timberk , .
4

IM2024
4.

1. 1

LCD –

. . / –

T-CMA34D61 220-240~/50
1350 20
+ +
15
180
1500 750
+ 8.47 9.42 439x187x318

5

IM2024

1*
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.

6

IM2024
6.
1. 1 . 2. 1 . 3. 1 . 4. 1 . 5. 1 . 6. 1 . 7. 1 . 8. – 1 . 9. – 1 . 10. – 1 .
7.
, . . . .
1. , , , . 2. , :
(1) : MAX, ,
, .
( 25°C). 1.5 .
(2) : , , :
. . ,
. ,
.
7

IM2024
(3) ,
, . 15
, .
: , «8». 1 () 15 (), , .
: , .
. , . , , . , , .
(4) . .
: 200 . , , – , .
(5)
. .
, . .
(6) 85 115 .
. , .
, .
8

IM2024
(7) ,
.
(A) , . (B) . (C) ,

.

.
(A). (B) ,

.

(8) ,
. , .
,

.

(9) .
, // .
.

: , . .

9

IM2024

10

11

12

13

14

15

1

2

9

3

4

5

6

7

8

1. / 2. « » – 3. 4. 5. 6. 7. 8. «» – 9. « » – 10. « » – 11. «» – 12. «» – 13. «» – 14. « » – 15. «» –

: .
: (2-3 , 6-8 ) . 1. «I».
10

IM2024

,

.

: , « », .

3. .

,

.

5. , , ,

,

, .

,

.

,

.

7. .

:

:
1. . 2. , (. , )

11

IM2024

,

. . 4. .

5. ,

.

1. . 2. , . (. , )

,

. .

: , ,
.

4. .

12

IM2024

5. ,

.

1. . 2. , . (. , )

, .

.

5. ,

.

1. . 2. .
: . 3-5 .
: (1) 5-10 oC, 3%. (2) MAX .
3. .

4. , . 5. .

6. , .
: ,
.

13

IM2024
, , .
(1) . (2)
. (3) . (4) . (5) .

1. . 2. .
: . 3-5 .
: (1) 5-10 oC,
3%. (2) MAX .
3. .
4. , . 5. .
6. , .
: ,
. ,
, . (1) . (2)
. (3) . (4) . (5) .
14

IM2024

1. .
: 120 .
2. , . (. , )

, .

4. ,

.

5. ,

.

: , . ,
.

1. . 2.
.

,

, .

4. , .

5. ,

.

: . 3-5 .
160 .

: 5-10 oC,
3%.
MAX .

: ,
.

15

IM2024
, , .
(1) . (2)
. (3) . (4) . (5) .

1. .
2. , . 3. , .
4. , .

: . , .
1. , .
, . 2. . 3. , .
4. , .
: 15 . .

, .

.

2. , 28

.

16

IM2024

,

, .

:

,

.

« »

.

. .

( ,

,

)

,

.

,

, , .

:

(1) : 30-100 (2) : (30-100 )*2 (3) : 110-180

. .

( , ), , . . , ,

17

IM2024
, .

«» :

«» .

(1) : : 30-100 + : 10-40 (2) : : 30-100 + : 10-40

,

.

: ( ) , . .

1. , . , . . 2. . , . 3. , , , , , , , . 4. . 5. :

, , 8 .

18

, , .

IM2024

4 . , , 8 . 4 .
.

19

.
.
. 1. . 2. . 3. , . 4. . 5. , .

IM2024
6. . 7. ( 3,4, ) 8. 9. . 10. .

1:

.

1. . 2. , , .
3. , .
2: 1. ,

, . .
20

IM2024

, , . .
.

3. ,

.

4. ,

.

, .

.

21

. .

.
.

IM2024
. . , 2

.

. ,

.

2 .
. 3-5 , .

.

.
16 , 5 .

.
. 5 , .

22

IM2024

.

.
.
.
.
.
.

, .

.

.
.
.
.
. . On/Off. . ,
23

. , . . , , . . . On/Off. . .

.

, .

.

IM2024
.
, 3 , . , . , . 1.

,

, .

2 , . 2. , . , . 3.

.

, .
,

24

IM2024

.

, .
« ». .

12. , , , / , . .
. , .

, , . , . , . . , . , . , . , . , , , , , , , , – .

25

Dear customer!

IM2024

We thank you for your wise choice and for a purchase of this timberk coffee machine. It will serve you for a long time.

1. IMPORTANT INFORMATION

Please, read this manual before using the device. This manual contains important information regarding your safety, as well as recommendations concerning the correct use and maintenance of this appliance. Keep this manual together with a warranty card, cash register receipt and, if possible, carton and packaging material. This instruction manual describes different types of this device. The device you purchased may differ slightly from the description in the manual, which does not affect the methods of use and operation. The manufacturer reserves the right to make minor changes to the device without additional notice which is not fundamentally affect its safety, performance and functionality. There may be some misprints in text and digital notations in the present manual.

IMPORTANT! Important safeguards and descriptions contained in this manual do not include all possible situations that you may experience using the device. The manufacturer is not responsible for damage of the appliance or its parts during transportation, as a result of incorrect installation or voltage fluctuations, as well as when any part of the appliance has been changed or modified.

NOTE There is a label on the device which has all the necessary technical data and other useful information about the device. Use the appliance only for the purpose specified in this manual.

2. SAFEGUARDS

When using this device, a number of safety precautions must be observed. Improper operation by ignoring safety precautions can result in damage to the health of the user and other people, as well as damage to their property.

1. Please read these operating instructions carefully before connecting your device to the power supply, in order to avoid damage due to incorrect use.
2. Before switching on the appliance for the first time please check if the technical specifications indicated on the unit correspond to the mains parameters.
3. In case of power cord is damaged, its replacement should be done by the manufacture or service department or the other high-skill person to avoid any danger.
4. The appliance is not intended for use for physically, sensory or mental disabled person (including children) or for person with lack of life experience or knowledge, if only they are under supervision or have been instructed about the use of the unit by responsible person.

26

IM2024
5. The device can be used by persons with limited physical, sensory or mental abilities or with a lack of experience and knowledge, if they are supervised or instructed about the safe use of the device and understand the dangers associated with it.
6. Keep the appliance and its cord out of the reach of children. 7. This appliance should not be used by children. Children must be under control
in order not to be allowed to play with the appliance. 8. When using the device by children or near them, careful supervision is required. 9. Cleaning and user maintenance shall not be made by children unless they are
supervised. 10. To disconnect the appliance from the power supply pull it out by the plug only,
not by the cord. 11. Always disconnect the device from the power supply before maintenance,
assembly, disassembly and cleaning, or if you do not use it. Allow the appliance to cool down before putting on or removing parts, as well as before cleaning the appliance. 12. The surface of the heating element will be hot for some time after use. 13. Do not use other attachments than those supplied. 14. Do not use outdoors or in high humidity conditions. 15. Do not use the appliance for purposes not covered by this operating manual. 16. Do not let the cord hang over sharp edges or touch hot surfaces. 17. Do not place the appliance on or near a gas or electric burner, or in a preheated oven. 18. Do not allow the coffee machine to work without water. 19. To protect against fire, electric shock and injury, do not immerse the cord, plug in water or other liquid. 20. Do not place a hot milk container on a hot or cold surface. 21. The milk container is intended for use only with this appliance. It should never be used on a gas stove. 22. Do not clean the container with cleaning agents, steel brushes or other abrasive materials. 23. Be careful not to get burned by steam during the brewing process. 24. Some parts of the device get hot during operation, so do not touch them with your hands. Use only the control panel. 25. Do not immerse the unit in water. 26. The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial use, and also for use in: kitchen area for the stuff of shops, offices and the other industrial places farm houses hotels, motels, rest homes and other similar places by residents. 27. The coffee machine must not be placed in the kitchen cabinet during use. 28. Turn off the appliance and disconnect it from the mains before changing accessories or approaching moving parts. 29. ATTENTION: In order to avoid the danger associated with unintentional reset of the thermal switch, this device should not be powered by an external switch, a programmer such as a timer, or connected to a circuit that is regularly switched on and off by the power grid.
27

IM2024
30. Follow the instructions above, including the instructions in the “CLEANING AND MAINTENANCE” section.
31. Save these instructions for future references. 32. If the product has been exposed to temperatures below 0ºC for some time it
should be kept at room temperature for at least 2 hours before turning it on. 33. Do not attempt to repair, adjust or replace parts in the appliance. Repair the
malfunctioning appliance in the nearest service center. 34. ATTENTION: The opening of the tank must not be opened while using the
device. 35. Do not allow liquid to get on the plug of the power cord.

3. APPOINTMENT OF THE DEVICE

This device is a multifunctional coffee machine with the ability to prepare single and double portions of Espresso, Americano, Cappuccino, Latte, hot water. This model of the timberk coffee machine also performs the functions of foaming milk for Cappuccino, Latte and coffee beans grinding.

4. SPECIFICATIONS

Specifications of the device are shown in Table 1.

Table 1

Parameter

Units

Power supply

V/Hz

Rated power consumption

W

Pump pressure

Bar

Pump type

–

LCD display

–

Touch control

–

Grinding levels

–

Grinder capacity

g

Water tank

ml

Milk reservoir

ml

Detachable drip tray

–

Net weight

kg

Gross weight

kg

Device dimensions

mm

T-CMA34D61 220-240~/50
1350 20 Italy + + 15 180
1500 750
+ 8.47 9.42 439x187x318

28

IM2024
5. DEVICE DESCRIPTION
Fig. 1 1. Bean box cover 2. Grind setting knob 3. Water tank 4. Brewer 5. Residue collection container 6. Door 7. Inner drip tray 8. Cleaning brush 9. Drip tray 10. Drip plate 11. Milk frother 12. Coffee outlet cover 13. Milk reservoir 14. Coffee outlet 15. Control panel
The appearance of the device may differ from the images in the manual
29

6. DELIVERY SET

IM2024

1. Coffee maker 1 pc. 2. Milk reservoir 1 pc. 3. Milk tube 1 pc. 4. Water tank 1 pc. 5. Detachable drip tray 1 pc. 6. Drip plate 1 pc. 7. Cleaning brush 1 pc. 8. Instruction manual – 1 pc.
9. Warranty card – 1 pc.
10. Packaging – 1 pc.

7. BEGINNING

BEFORE FIRST USE Check that all accessories are complete and the unit is not damaged. Check and understand all the parts and their functions. It is recommended to keep the original packaging for future use. And then follow the operations as below.

1. Before using for the first use, please remove the water tank, milk reservoir, brewer and milk frother and rinse them with clean water. 2. Check and make sure all the removable parts are installed well in position:

(1) Water tank:
Fill the water tank with fresh water up to Max mark and then reassembly it into the unit and make sure it is properly assembled, and then close the water tank lid.
It is recommended to fill the tank with 25 °C temperature water. Max water tank volume 1.5 L.

(2) Milk reservoir: In order to make latte cappuccino or froth milk it in necessary to install milk reservoir: Insert the milk tube into the hole of milk frother at the side of coffee outlet. Move the milk tube from the milk reservoir lid and then insert it into the milk reservoir
lid. Install the milk reservoir and milk reservoir lid well in position. The milk tube can be folded, and please install it firmly by yourself if it is loose.

(3) Grind setting knob Rotate the knob clockwise to make the coffee powder coarse and counterclockwise
to make the coffee powder fine. The degree of grinding is selected between 15 levels via this grinding knob.

NOTE: When the new coffee machine is used for the first time, it is suggested that the grind setting higher than setting 8 shall be selected. The adjustable grind settings range

30

IM2024
between 1 (finest) and 15 (coarsest), the number on the grind setting knob pointed by the arrow is the actual selected grind setting.
CAUTION: We suggest to adjust one notch at one time to avoid the damage.
The degree of grinding should be adjusted only during the operation of the coffee machine. Otherwise, the device may be damaged. If the brewed coffee flows out too slowly, it means that the beans are ground too finely and the grinding should be adjusted to a coarser one. If the brewed coffee flows out too quickly, it means that the grains are ground too coarsely and the grinding should be adjusted to a finer level.
(4) Bean box Remove the bean box cover. Fill the box with coffee beans and close the cover.
NOTE: The maximum capacity of the coffee bean box is 200 g of beans. Never pour ground or instant coffee, caramelized or otherwise processed coffee beans, cocoa beans or other objects that could damage the appliance into the coffee bean tank.
(5) Milk frother Press the sides of the coffee outlet cover and remove it. Insert the milk frother to the coffee outlet, gently press it upward Put the coffee outlet cover back.
(6) Adjustment for the height of coffee outlet The adjustable height of coffee outlet ranges between 85 and 115 mm. Adjust the height of the outlet by lifting it up and down, depending on the size of the
coffee cup. If the coffee cup is too big, remove the drip tray. Place the tray back after making a
drink.
(7) Brewer Open the door and check whether the brewer is installed well in position.
(D) Check whether the arrow of the brewer is aligned with the arrow of the upper bracket. (E) An audible click indicates that the assembling of brewer is correct.

(F) The warning indicator Close the door

will light solidly if the brewer is not installed in place.

(A) The whole door and body are on the same horizontal plane.

(B) The warning indicator

will flash if the door is not closed properly.

31

IM2024
(8) Inner drip tray and residue collection container Open the door and check whether the drip tray is installed in place. Open the door and check whether the residue-collection container is installed in
place.
The inner drip tray will not be installed well in position, the warning indicator will flash and the machine cannot work if there is foreign object at the front of the residue-collection container.
(9) Drip plate Place the drip plate on the drip tray. The drip plate must be installed well in position
so that the container can be placed on it for holding coffee, milk or hot water. Insert the drip tray into the appliance.
NOTE: The drip tray collects the water from the dispensing spout during each rinse & self-cleaning as well as coffee that might be spilled during brewing. So clean and empty the drip tray everyday.
8. OPERATION OF THE DEVICE
Control panel

10

11

12

13

14

15

1

2

9

3

4

5

6

7

8

1. Power switch 2. « » button – Manual milk froth function 3. No bean in the coffee grinder indicator 4. No water in water tank indicator 5. Brewer cleaning indicator 6. Warning indicator 7. Residue collection container full indicator 8. «» button – Manual clean function 9. « » button – Coffee grinder emptying function 10. « » button – Hot water
32

IM2024
11. «» button – Latte 12. «» button – Cappuccino 13. «» button – Americano 14. « » button – Double-cup Espresso 15. «» button – Single-cup Espresso
OPERATION
SPECIAL NOTE: The appliance will perform cleaning automatically to make preparation for operation when it is started each time.
NOTE: The coffee will come out drip by drip at the beginning (2-3 seconds after the brewing is started) and the end (6-8 seconds before the brewing is completed) during the brewing process, this is normal.

Power on and Preheat 1. Connect the appliance with rated voltage and press the On/Off button at the back
side of the appliance.

2. Hold and press the Power switch

for at least 0.3 second and its corresponding

indicator flashes, and then the appliance enters into the self-check status.

NOTE: Please refer to the section of “TROUBLESHOOTING” to operate if there is warning occurred.

3. Place a container under the coffee outlet.

4. The Manual clean indicator illuminates solidly and the indicator of Power switch

flashes, then the appliance enters into the preheating stage and the auto- clean status.

5. During the preheating of steam boiler, the indicators of Cappuccino , Latte ,

Hot water

, Manual froth

and Manual clean flash, which means the

appliance can not be operated. After the preheating of steam boiler is completed,

the functional indicators will illuminate solidly and the appliance can be operated

normally.

6. After the preheating of coffee boiler is completed, the indicators of Single-cup

Espresso , Double-cup Espresso

, Americano

and Bean-emptying

illuminate solidly, and the appliance can be operated normally.
33

IM2024
7. All the functional indicators will illuminate solidly after all the preheating stages are completed, and then the appliance will enter into the standby status.
Making coffee drinks:
Brew Single-cup Espresso:
1. Place a coffee container under the coffee outlet. 2. Check and make sure the plug of milk frother is closed well in position. (see fig. A,
B)

Fig. A

Fig. B

3. Hold and press the Single-cup Espresso

for at least 0.2 second and the

appliance will start to brew single-cup of espresso. The indicator of Single- cup

Espresso espresso.

will illuminate solidly during the process of brewing single-cup of

4. After finish brewing single-cup of espresso, the appliance enters into the standby mode automatically.

5. Hold and press the Single-cup Espresso to cancel the current function.

for at least 0.1 second again if need

34

IM2024
Brew Double-cup Espresso:
1. Place a coffee container under the coffee outlet. 2. Check and make sure the plug of milk frother is closed well in position. (see fig. A,
B)

3. Hold and press the Double-cup Espresso

for at least 0.2 second and the

appliance will start to brew double-cup of espresso. The indicator of Double- cup

Espresso espresso.

will illuminate solidly during the process of brewing double-cup of

NOTE: The double-cup espresso is achieved by brewing two cycles of single-cup espresso continuously, so please do not remove the coffee container during the brewing process.

4. After finish brewing double-cup espresso, the appliance enters into the standby mode automatically.

5. Hold and press the Double-cup Espresso to cancel the current function.

for at least 0.1 second again if need

Brew Americano:
1. Place a coffee container under the coffee outlet. 2. Check and make sure the plug of milk frother is closed well in position. (see fig. A,
B)

3. Hold and press the Americano

for at least 0.2 second and the appliance will

start to brew Americano. The indicator of Americano

will illuminate solidly

during the process of brewing Americano.

4. After finish brewing Americano, the appliance enters into the standby mode

automatically.

5. Hold and press the Americano the current function.

for at least 0.1 second again if need to cancel

35

Brew Cappuccino:

IM2024

1. Place a coffee container under the coffee outlet. 2. Fill the milk reservoir with appropriate amount of cold milk.
NOTE: After the “Cappuccino” function is conducted, the overheating protection mechanism for the boiler will be activated, at that time, if need to conduct the “Hot water” function the appliance should be rested for about 3-5 minutes and then the “Hot water” function can be activated. NOTES: (1) It is recommended that the temperature of milk should be 5-10, and the protein
content of milk should be at least 3%. (2) The milk filled in the milk reservoir should not exceed the “MAX” mark on the milk
reservoir.
3. Insert the milk tube in the milk frother on the one side and in the milk reservoir lid on the other.

4. Hold and press the Cappuccino for at least 0.2 second and the appliance will start to brew Cappuccino.
5. After finish brewing cappuccino, the appliance enters into the standby mode automatically.

6. Hold and press the Cappuccino the current function.

for at least 0.1 second again if need to cancel

NOTES:
It is recommended to use a high cup to prevent the frothed milk from splashing. After each use, if there is still milk in the milk reservoir, please store it in the
refrigerator, but the silicone tube and milk frother should be cleaned in time. (1) Remove the silicone tube and rinse it with tap water. (2) Remove the coffee outlet cover and rinse it with tap water. (3) Remove the milk frother and rinse it with tap water. (4) After finish cleaning, replace all the parts well in position. (5) Rinse the milk reservoir with tap water.

Brew Latte

1. Place a coffee container under the coffee outlet. 2. Fill the milk reservoir with appropriate amount of cold milk.
NOTE: After the “Latte” function is conducted, the overheating protection mechanism for the boiler will be activated, at that time, if need to conduct the “Hot water” function the appliance should be rested for about 3-5 minutes and then the “Hot water” function can be activated.

36

IM2024
NOTES: (1) It is recommended that the temperature of milk should be 5-10, and the protein content of milk should be at least 3%. (2) The milk filled in the milk reservoir should not exceed the “MAX” mark on the milk reservoir.
3. Insert the milk tube in the milk frother on the one side and in the milk reservoir lid on the other.

4. Hold and press the Latte for at least 0.2 second and the appliance will start to brew latte.
5. After finish brewing latte, the appliance enters into the standby mode automatically.

6. Hold and press the Latte current function.

for at least 0.1 second again if need to cancel the

NOTES: It is recommended to use a high cup to prevent the frothed milk from splashing.

After each use, if there is still milk in the milk reservoir, please store it in the refrigerator, but the silicone tube and milk frother should be cleaned in time.
(1) Remove the silicone tube and rinse it with tap water. (2) Remove the coffee outlet cover and rinse it with tap water. (3) Remove the milk frother and rinse it with tap water. (4) After finish cleaning, replace all the parts well in position. (5) Rinse the milk reservoir with tap water.

Make hot water 1. Place a water container under the coffee outlet. NOTE: The capacity of water container should be more than 120 ml. 2. Check and make sure the plug of milk frother is closed well in position.

3. Hold and press the Hot water start to make hot water.

for at least 0.2 second and the appliance will

4. After finish making hot water, the appliance enters into the standby mode automatically.

5. Hold and press the Hot water the current function.

for at least 0.1 second again if need to cancel

37

IM2024
NOTE: Please do not touch the water container with your hands during making hot water. Please do not use the hot water to prevent from being burnt as there will be still a little hot steam dispensed from the coffee outlet after finish making hot water.

Manual froth
1. Place a milk container under the coffee outlet. 2. Fill the milk reservoir with appropriate amount of cold milk.

3. Hold and press the Manual froth

for at least 0.2 second and the appliance will

start to conduct the manual froth function.

4. After finish frothing milk, the appliance enters into the standby mode automatically.

5. Hold and press the Manual froth the current function.

for at least 0.1 second again if need to cancel

NOTE: After the “Manual froth” function is conducted, the overheating protection mechanism for the boiler will be activated, at that time, if need to conduct the “Hot water” function the appliance should be rested for about 3-5 minutes and then the “Hot water” function can be activated.
The capacity of milk container should be more than 160 ml.

NOTES: It is recommended that the temperature of milk should be 5-10, and the protein
content of milk should be at least 3%.
The milk filled in the milk reservoir should not exceed the “MAX” mark on the milk reservoir.

NOTES: It is recommended to use a high cup to prevent the frothed milk from splashing. After each use, if there is still milk in the milk reservoir, please store it in the
refrigerator, but the silicone tube and milk frother should be cleaned in time. (1) Remove the silicone tube and rinse it with tap water. (2) Remove the coffee outlet cover and rinse it with tap water. (3) Remove the milk frother and rinse it with tap water. (4) After finish cleaning, replace all the parts well in position. (5) Rinse the milk reservoir with tap water.

Manual clean

1. Place a water container under the coffee outlet.
2. Hold and press the Manual clean for at least 0.2 second and the appliance will start to conduct the manual clean function.
3. After finish cleaning, the appliance enters into the standby mode automatically.
38

IM2024
4. Hold and press the Manual clean the current function.

for at least 0.1 second again if need to cancel

Empty the coffee beans left
NOTE: This function is used for emptying the beans in the bean box. Please use it carefully to avoid waste.

1. Hold and press the Bean-emptying for at least 1 second and the appliance will start to conduct the bean-emptying function. At that time, the indicator of Bean-

emptying illuminates solidly while other functional indicators turn off. 2. Remove the residue-collection container and empty the ground coffee in it. 3. After finish working, the appliance enters into the standby mode automatically.

4. Hold and press the Bean-emptying cancel the current function.

for at least 0.3 second again if need to

NOTE: The bean-emptying function only last for 15 seconds each time, please repeat the above operation if there are many coffee beans left in the bean box.

Energy-saving mode

1. Hold and press the Power switch

for at least 0.2s to and then the appliance

enters into the sleep mode. At that time, all the indicators turn off and all the functions

are invalid.

2. The appliance will enter into the sleep mode if there is not any operation within 28

minutes. At that time, all the indicators turn off and all the functions are invalid.

3. During sleep mode, hold and press the Power switch

for at least 0.2 second,

then the appliance will conduct self-check, preheat and return to the standby mode.

NOTES: When the appliance is powered on continuously, hold and press the Power switch

for at least 0.2 second to activate the appliance after more than 4 hours, and the auto-clean function of the appliance will be activated. Please refer to the section of “Power on and Preheat” for details.

Set the coffee-dispensing amount and milk-dispensing amount 1. Operation for setting the coffee-dispensing amount:
39

IM2024
The coffee machine allows you to adjust the volume of the coffee drink served according to your preferences. The preset settings will be saved in the device memory.

After the coffee dispenses from the appliance (via ,

,

buttons), hold and

press the selected functional key for 2 seconds, the buzzer beeps and the corresponding

indicator of selected functional key flashes, at that time, the appliance enters into the

mode for setting the coffee-dispensing amount. As soon as the coffee in the cup reaches

the required level, release the selected functional key, then the appliance stops working

and the newly-set coffee-dispensing amount is saved. And the range of coffee-

dispensing amount is as below:

(1) Single-cup Espresso: 30-100 ml (2) Double-cup Espresso: (30-100 ml)*2 (3) Americano: 110-180 ml

2. Operation for setting the milk-dispensing amount:

The coffee machine allows you to adjust the volume of milk served according to your preferences. The settings you set will be saved in the device’s memory.

After the milk dispenses from the appliance (via , buttons), hold and press the selected functional key for 2 seconds, the buzzer beeps and the corresponding indicator of selected functional key flashes, at that time, the appliance enters into the mode for setting the milk-dispensing amount. As soon as the milk in the cup reaches the required level, release the selected functional key, the appliance stops working and the newly-set milk-dispensing amount is saved. The operation for setting the milk-dispensing amount

is only applicable for the functions of “Cappuccino” of milk-dispensing amount is as below:

and “Latte” . And the range

(1) Cappuccino: Coffee: 30-100 ml + Milk:10-40 seconds (2) Latte: Coffee: 30-100 ml + Milk:10-40 seconds

Factory reset

Hold and press the Single-cup Espresso

and Double-cup Espresso

for 2

seconds at the same time, then all the parameters are recovered to the factory default

setting.

9. CLEANING AND MAINTENANCE

CAUTION: Be sure to unplug this appliance before cleaning and let the appliance cool down completely. To protect against electrical shock, do not immerse cord, plug or unit in water or liquid. Please unplug the appliance after each use.

40

IM2024
Before cleaning, always disconnect the device from the power supply and let it cool down completely (the heating element remains hot for some time after use).

1. Wipe the outer surface of the product with a soft damp cloth to remove stains, but avoid using abrasive cleaning tools as they will scratch the product. Do not use alcohol or solvent cleaners.
2. Water droplets may buildup in the area above the drip plate or countertop during brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use of the product.
3. The brewer, water tank, milk reservoir, drip tray, drip plate, inner drip tray, residuecollection container and door can not be put into the dishwasher for cleaning.
4. The water in the drip plate and drip tray as well as the coffee grounds in the inner drip tray and residue-collection container need to be emptied and they shall be cleaned well.
5. Clean the parts by following the description and operation as below.

Detachable parts
Residue-collection container
Brewer
Water tank Milk reservoir Milk frother Drip tray Grinder

When to clean For Single-cup Espresso, Latte and Cappuccino, conduct once every 8 brewing cycles. For Double-cup Espresso, conduct once every 4 brewing cycles. It is recommended to clean it on the same day if it is not used for a long time. For Single-cup Espresso, Latte and Cappuccino, conduct once every 8 brewing cycles. For Double-cup Espresso, conduct once every 4 brewing cycles.
Once every week
After every use
After every use
Empty the drip tray every day and clean it once every week
Clean it once every week

How to clean
Remove the residuecollection container and empty it, add some cleaning solution and then rinse it under the tap water.
Remove the brewer from the coffee machine and rinse it under the tap water.
Rinse the water tank under the tap water. Rinse the milk reservoir under the tap water Remove the milk frother from the appliance and rinse it under the tap water. Remove the drip tray and add some cleaning solution and then rinse it under the tap water. 1. Remove the grind setting knob counterclockwise.

41

IM2024

2. Remove the internal

grinding

wheel

counterclockwise.

3. Clean the grinding wheel

with the cleaning brush and

empty the ground coffee at

the gap.

4. Clean the grinding

chamber with the cleaning

brush.

5. Do not install the

grinding wheel and install

the grind setting knob well

in position again.

6. Press the button of

grinder.

7. Let the grinder keep

running to remove the

remaining powder in the

grinding chamber (please

repeat the operation of

Step 3 and 4 if there is

coffee powder left.)

8. Remove the grind setting

knob counterclockwise.

9. Install the grinding wheel

clockwise.

10. Install the grind setting

knob clockwise, and the

cleaning is completed.

42

IM2024
Non-detachable parts
Powder-dispensing channel

When to clean Check it once a week

How to clean Method 1: 1. Hold and press the

“Bean-emptying” key and “Single-cup Espresso”

key

for 2 seconds at

the same time, their

corresponding indicators

flash and the door is

opened.

2. Open the door and loosen the ground coffee in the power-dispensing channel by a toothpick, and then close the door when there is ground coffee falls down.

3. Hold and press the

“Bean-emptying” key and “Single-cup Espresso”

key at the same time again for at least 0.3 second, then their corresponding indicators extinguish and the door is closed.

Method 2:
1. If there are few coffee beans remained in the bean box, hold and press the “Bean-emptying” key
for at least one
43

Brewing base Brewing system bracket

Check it once a week

IM2024
second to make the appliance keep working until the ground coffee blocked in the powerdispensing channel are emptied, and then the appliance goes back to the normal working status.
NOTE: If the ground coffee become finer obviously during the use of the appliance, or the coffee pack become smaller after finish brewing, please check the powderdispensing channel for any powder blockage, and the powder- dispensing channel should be cleaned once every week.
Clean the coffee residue around the brewing base with a brush.
1. When the appliance is powered on, hold and press Manual Clean key
and Double-cup

Check it once a week

Espresso

for 1

second to center into the

mode for cleaning the

dead corner of brewer.

2. After enter into the brewer-cleaning function, the brewer moves to the bottom.

3. After the brewing door is opened (the appliance stays at the safe protection

44

IM2024

state), the dead corner of brewer can be cleaned.
4. After finish cleaning, close the brewing door.
5. Hold and press Manual

Clean key Double-cup

and Espresso

for 1 second to exit from the cleaning function.

10. TROUBLESHOOTING Problem
The Refill indicator flashes. The Warning indicator
flashes.

Cause
The water tank lacks water.
The grind setting knob, door and inner drip tray are not installed well in position.

Solution Refill the water tank with water.
Install these parts well in position.

The Warning indicator illuminates solidly.
The No bean indicator illuminates solidly.
The Residue full indicator illuminates solidly.

The brewer or inner drip tray is not installed well in position.
The bean box is lack of coffee beans.
The residue-collection container needs to cleaned.

Install these parts well in position.
Fill the bean box with coffee beans and then run the coffee machine to brew coffee, then the nobean warning can be canceled. Remove the residuecollection container and inner drip tray for cleaning, after 2 seconds, the
Residue full indicator turns off.

45

The Brewer cleaning

indicator solidly.

illuminates

The indicator of Hot water flashes.
The Single-cup Espresso

The brewer needs to be cleaned.

IM2024
Remove the brewer for cleaning, after 2 seconds, the “Brewer cleaning

The overheating protection mechanism for the boiler will be activated, at that time.

indicator” turns off. If need to conduct the “Hot water” function the appliance should be rested
for about 3-5 minutes and
then the “Hot water” function can be activated.

and Warning indicator
flash at the same time.

The No bean indicator and Warning

indicator same time.

flash at the

The grinding motor does not work normally.
It means that the appliance has performed the bean-grinding for 16 cycles continuously, and the time for each grinding is less than 5 minutes. And then the grinding system will be forced to be cooled down for 5 minutes, at that time, all the functions are invalid.

Turn off the appliance and restart it.
The appliance will rest for 5 minutes or turn off the appliance and restart it.

The indicator of Hot water

and Warning

indicator same time.

flash at the

The flow meter has no signal and the waterdispensing is abnormal.

Fill the water tank with water.

The indicator of Latte and Warning indicator
flash at the same time.

The Hall element has no signal and the brewing motor does not work normally.

Turn off the appliance and restart it

46

IM2024
The crema is not rich.
Coffee comes out slowly or comes out drip by drip. Coffee does not come out of the coffee outlet.
The machine cannot be activated.

The brewer cannot be removed

The indicators

and

flash at the same time

The residue-collection container is not full but the machine prompts you to empty the residuecollection container or clean the brewer.

The coffee machine can grind coffee beans but there is no coffee come out.

The ground coffee is too coarse.
The type of coffee bean used is wrong.
The ground coffee is too fine. The coffee outlet is blocked. The power plug has not been connected well in position The power source is not connected well. The On/Off button is not turned on. The machine is not turned off correctly The brewer is blocked.
Residue collection container needs to be emptied and brewer needs to be cleaned.
The counter is not reset after emptying the residuecollection container or cleaning the brewer.
Please check the deeplyroasted coffee beans for the oil on the surface.The powder-dispensing
47

Turn the grind setting knob clockwise to select the proper setting. Use the coffee beans which are suitable for brewing espresso. Turn the grind setting knob anticlockwise to select the proper setting. Clean the coffee outlet with a toothpick. Connect the power plug with the main power supply of machine Connect the power source of the machine.
Turn on the On/Off button.
. Contact an authorized service center.
Empty the residue collection container and clean the brewer.
After replacing the residue-collection container or the brewer, always wait for about 3 seconds to make the counter be reset to zero. Always empty the residuecollection container and clean the brewer when the coffee machine is turned on. The counter will not be reset if the residuecollection container is emptied or the brewer is cleaned when the coffee machine is turned off. 1. Hold and press the
“Bean-emptying” key and “Single-cup Espresso”

channel will be blocked if the coffee beans are dampened or there is too much oil on the surface.

IM2024
key for 2 seconds at the same time, the door is opened, and their corresponding indicators flash. 2. After the door is opened, loosen the ground coffee in the powerdispensing channel by the cleaning brush, and then close the door when there is ground coffee falls down. 3. And then hold and press the “Bean-emptying” key

and “Single-cup

The coffee machine makes large noise.

It is normal that the coffee machine makes noise during operation.

Espresso” key for at least 0.3 second again, and their corresponding indicators extinguish and the door is closed.
If the coffee machine starts to make another kind of noise, please lubricate the brewing system and contact the after-sales department.

11. STORAGE

Make sure that the appliance is disconnected from the mains and completely cooled down.
Follow all the requirements of the CLEANING AND MAINTENANCE section. Store the appliance in a cool, dry place.

12. UTILIZATION RULES
The symbol on the unit, packing materials and/or documentations means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be pass to special receiving point.

For additional information about actual system of the garbage collection, address to the local authority.

48

IM2024
Valid utilization will help to save valuable resources and avoid negative work on the public health and environment which happens with incorrect using garbage
After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and methods in region of recycling. Detailed information about the recycling of the device, you can receive from a representative of the local authorities, after providing full information about the device. The manufacturer and authorized organization of the manufacturer do not carry responsibility for the fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller. The warranty card provided by the Seller must conform to the manufacturer’s form. The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a result of noncompliance with the rules and operating conditions, installation of the device, intentional or reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or anthropogenic accidents.
, !
Timberk . .

. , – . , , , , . . , . , , . .
! . , , ,
49

IM2024
, – , .
, . .
2.
, , – .
1. .
2. .
3. , , , , .
4. , – ( ) , , , .
5. , – , , .
6. .
7. . .
8. .
9. .
10. , . .
11. , , , . .
50

IM2024
12. . 13. . 14. –
. 15.
. 16.
. 17. , –
. 18. . 19. ,
, . 20. . 21. .
. 22. ,
. 23. . 24. ,
. . 25. . 26. .
– , – :
, – ;
;
, , .
27. . 28. –
, . 29. :
, , . 30. « » , . 31. . 32. 0° , 2 . 33. . . 34. : .
51