EXFO 700D Series MaxTester 715D Last Mile OTDR Owner’s Manual
- July 24, 2024
- EXFO
Table of Contents
- EXFO 700D Series MaxTester 715D Last-Mile OTDR
- Product Usage Instructions
- KEY FEATURES
- APPLICATIONS
- RELATED PRODUCTS AND ACCESSORIES
- KEY BENEFITS
- SIMPLE SETUP IN THREE STEPS
- PACKAGED FOR EFFICIENCY
- SPECIFICATIONS a
- ORDERING INFORMATION
- FAQ
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EXFO 700D Series MaxTester 715D Last-Mile OTDR
Specifications:
- Product Name: MaxTester 715D last-mile OTDR
- Usage : Point-to-point (P2P) links, last-mile installation, and troubleshooting
- Features : Tablet-inspired design, 12-hour autonomy, dynamic range up to 32 dB
- Dead Zones : Event dead zone (EDZ) 0.9 m, Attenuation dead zone (ADZ) 3.6 m
- Warranty : 3 years
Product Usage Instructions
Overview:
The MaxTester 715D OTDR is designed for frontline single mode fiber installers
for various applications like FTTx last-mile installation, troubleshooting,
and more.
Key Features:
- Rugged, handy, lightweight design suitable for outside plant use
- 12-hour autonomy ensures long operational usage
- Dynamic range up to 32 dB for accurate measurements
- Swap-Out connector for optimal performance over time
- iOLM-ready for easy multiple acquisitions and clear results
Applications:
- FTTx last-mile installation and troubleshooting
- Short access-network testing
- FTTA fiber-DAS installations
- CATV/HFC network testing
Related Products and Accessories:
- Fiber inspection scope FIP-400B (WiFi or USB)
- Advanced data post-processing software
- Soft pulse suppressor bag SPSB
Proven Performance:
The MaxTester 715D is built on a reliable platform offering a user-friendly
experience with advanced features for accurate results.
Fully featured, entry-level, dedicated OTDR with tablet-inspired design perfect for frontline singlemode fiber installers.
KEY FEATURES
- Rugged, handy, lightweight, tablet-inspired design built for outside plant
- 7-inch, outdoor-enhanced touchscreen–the biggest in the handheld industry 12-hour autonomy
- Dead zones: event dead zone (EDZ) 0.9 m, attenuation dead zone (ADZ) 3.6 m
- Dynamic range up to 32 dB
- Swap-Out connector, replaceable whenever necessary for optimal performance over time without undue service cost and downtime iOLM-ready: one-touch multiple acquisitions, with clear go/no-go results presented in a straightforward visual format
- 3-year warranty
APPLICATIONS
- FTTx last-mile installation and troubleshooting
- Short access-network testing
- FTTA fiber-DAS installations
- CATV/HFC network testing
RELATED PRODUCTS AND ACCESSORIES
THE HANDHELD OTDR… WITH PROVEN PERFORMANCE
The MaxTester 700D Series builds on the proven tablet-inspired, lightweight
and rugged OTDR MaxTester platform. The familiar 7-inch, outdoor-enhanced
touchscreen continues to deliver an unprecedented user experience with its
intuitive Windows-like GUI ensures a fast learning curve. The OTDR environment
offers icon-based functions, instant boot-up, automatic macrobend finders as
well as improved auto and real‑time modes. The MaxTester 700D Series is a line
of genuine high-performance OTDRs from the world’s leading manufacturer. It
delivers EXFO’s tried and true OTDR quality and accuracy along with the best
optical performance for right-first-time results, every time. The amazing
12-hour battery life will never let a technician down, and the plug-and-play
hardware options, like the VFL, power meter and USB tools, make every
technician’s job easier. Most importantly, the MaxTester 700D Series comes
with the intelligent Optical Link Mapper (iOLM), an intelligent OTDR‑based
application. This advanced software turns even the most complex trace analysis
into a simple, one-touch task. Ultimately, the MaxTester 700D Series is small
enough to fit in your hand and big enough to fit all your needs!
SECURE YOUR INVESTMENT AGAINST THEFT
Protected instruments have no value on the black market making them completely
unappealing to thieves. With our security management option, administrators
can define and load a tamper-proof security profile on the MaxTester,
displaying a property message on the home screen and securing it with a user
password (permanent or renewable).
LOOKING FOR ICON-BASED MAPPING?
Linear view (included with all EXFO OTDRs)
- Available on our OTDRs since 2006, the linear view simplifies interpretation of an OTDR trace by displaying icons in a linear way for each wavelength. This view converts the graph data points obtained from a traditional single pulse trace into reflective or non‑reflective icons. With applied pass/fail thresholds, it becomes easier to pinpoint faults on your link.
- This improved linear view offers you the flexibility to display both the OTDR graph and its linear view without having to perform a toggle to analyze your fiber link.
- Although this linear view simplifies OTDR interpretation of a single pulse-width trace, the user must still set the OTDR parameters. In addition, multiple traces must often be performed in order to fully characterize the fiber links. See the section below to learn about how the iOLM can perform this automatically and with more accurate results.
SWAP-OUT CONNECTOR
The MaxTester 700D OTDR Series comes with a Swap-Out connector which can
easily be changed, as and when needed, without having to send the test unit to
a service center. This ensures optimal performance over time without undue
maintenance costs and downtime. The OTDR’s optical connector health can be
checked with an onboard diagnostic tool to replace the connector only when
necessary.
-
Maintain top optical performance, no downtime.
Worn connectors impact optical performance and may be the source of inaccuracies. Replace connectors directly from the field, no need to return the unit to the manufacturer or spend money on repairs. -
Keep your calibration plan on track.
Your calibration date remains valid, even after swapping the connector. No need to calibrate your unit sooner than planned. -
Replace only when needed.
A diagnosis of the optical port is provided by the built-in connector health checker, which allows to replace worn connectors in the field, only when necessary.
iOLM—REMOVING THE COMPLEXITY FROM OTDR TESTING
OTDR testing comes with its load of challenges…
In response to these challenges, EXFO developed a better way to test fiber optics: The iOLM is an OTDR-based application designed to simplify OTDR testing by eliminating the need to configure parameters, and/or analyze and interpret multiple complex OTDR traces. Its advanced algorithms dynamically define the testing parameters, as well as the number of acquisitions that best fit the network under test. By correlating multipulse widths on multiple wavelengths, the iOLM locates and identifies faults with maximum resolution—all at the push of a single button.
How does it work?
Turning traditional OTDR testing into clear, automated, first-time-right results for technicians of any skill level.
Three ways to benefit from the iOLM
iOLM features value pack and options
In addition to the standard iOLM feature set, you can select added-value
features as part of the Advanced packages or standalone options. Please refer
to the iOLM specification sheet for the complete and most recent description
of these features.
- iOLM Standard
- Dynamic multipulse multiwavelength acquisition
- Intelligent traces analysis and diagnostics
- Single link view and event table
- SOR trace generation
- Single iOLM file per link for easy reporting
- Optimode : Fast short link
- iOLM Advanced (iADV) a
- Real-time OTDR
- SOR pulse and wavelength editor
- SOR trace view
- Custom elements
- Advanced link edition and re-analysis
- Optimode : PON last-mile certification
- iLOOP a
- iOLM loopback (uni- or bidirectional)
- iOLM automated bidirectional analysis over TestFlow b
GET ALL ADVANCED CAPABILITIES FOR FREE
FastReporter is a consolidated data management and post-processing solution
designed to improve results quality as well as auditing and reporting
productivity. Download the latest version of FastReporter, launch the
application and create your EXFO Exchange account to get the full range of
capabilities, at no cost. EXFO Exchange automates and optimizes workflows,
troubleshooting, field testing and reporting within a secured collaborative
software platform for each step of network deployment.
FEATURES | FastReporter (version 3) |
---|---|
Basic |
(now free with EXFO Exchange account)
Number of files| Up to 24 results| Unlimited
Measurement type| OTDR, iOLM, FIP, OLTS, OPM, CD, PMD
Results viewer| •| •
Reporting – Basic (PDF)| •| •
Reporting – Advanced (Excel, PDF, custom)| | •
Basic analysis – Bidir (OTDR and iOLM)| •| •
Advanced editing| | •
Automated validation and results correction| | •
Job management and identification edition| One file| Batch processing
Hundreds of additional features| | •
OPTICAL PLUG-AND-PLAY OPTIONS
The MaxTester features plug-and-play optical options that can be purchased
whenever you need them: at the time of your order or later on. In either case,
installation is a snap, and can be performed by the user without the need for
any software update.
-
Optical power meter
EXFO’s high-level power meter (GeX) can measure up to 27 dBm, the highest in the industry. This is essential for hybrid fiber‑coaxial (HFC) networks or high-power signals. If used with an auto‑lambda/auto-switching compatible light source, the power meter automatically synchronizes on the same wavelength, thus avoiding any risk of mismatched measurement. -
Visual fault locator (VFL)
The plug-and-play VFL easily identifies breaks, bends, faulty connectors and splices, in addition to other causes of signal loss. This basic, yet essential troubleshooting tool should be part of every field technician’s toolbox. The VFL visually locates and detects faults over distances of up to 5 km by creating a bright-red glow at the exact location of the fault (available with the optical power meter only).
FIBER CONNECTOR INSPECTION AND CERTIFICATION–THE ESSENTIAL FIRST STEP
BEFORE ANY OTDR TESTING
Taking the time to properly inspect a fiber-optic connector using an EXFO
fiber inspection scope can prevent a host of issues from arising further down
the line, thus saving you time, money and trouble. Moreover, using a fully
automated solution with autofocus capabilities will turn this critical
inspection phase into a fast and hassle‑free one-step process.
Did you know that the connector of your OTDR/iOLM is also critical?
The presence of a dirty connector at an OTDR port or launch cable can
negatively impact your test results, and even cause permanent damage during
mating. Therefore, it is critical to regularly inspect these connectors to
ensure that they are free of any contamination. Making inspection the first
step is a proven best practice that will maximize your OTDR performance and
your efficiency.
FEATURES | USB WIRED | WIRELESS | AUTONOMOUS |
---|---|---|---|
FIP-430B | FIP-435B | FIP-500 | |
Image capture | • | • | • |
Five-megapixel CMOS capturing device | • | • | • |
Automatic fiber image-centering function and focus adjustment | • | • |
•
Automatic fiber image-focus adjustment| •| •| •
On-board pass/fail analysis| •| •| •
Pass/fail LED indicator| •| •| •
USB connectivity to an EXFO platform or PC| •| •|
Wireless connectivity to an EXFO platform or PC| | •|
Wireless connectivity to a smartphone| | •| •
Semi-automated multifiber / MPO inspection| •| •|
Fully automated multifiber / MPO inspection| | | •
On-board touch screen and data storage| | | •
SmarTips with automated thresholds and quick-connect mechanism| | | •
For more information, visit www.EXFO.com/fiberinspection.
KEY BENEFITS
SIMPLE SETUP IN THREE STEPS
-
Create your free EXFO Exchange account
Begin your journey by creating an EXFO Exchange account. Setting up your account is quick and easy. -
Install the mobile app
Download the EXFO Exchange app to allow test data from compatible EXFO devices to be uploaded securely to the cloud (free of charge). -
Save time and boost efficiency
Once your account created—and the mobile app installed and paired with compatible EXFO devices—all test results will be sent to the cloud. On the web app, you will see field test results from all invited testers.
Get started >
SOFTWARE UTILITIES
Software update| Ensure that your MaxTester is up-to-date with the latest
software.
VNC configuration| The Virtual Network Computing (VNC) utility allows
technicians to easily remote control the unit via a computer or laptop.
Data mover| Transfer all your daily test results quickly and easily.
Centralized documentation| Instant access to user guides and other relevant
documents.
PDF Reader| View your reports in PDF format.
Bluetooth file sharing| Share files between your MaxTester and any Bluetooth-
enabled device.
WiFi connection| WiFi FIP inspection scope interface. Upload test results.
Inspection scope| USB or WiFi scope to inspect and analyze connectors.
FTP server| Exchange files over WiFi to an FTP application on a smartphone for
easier file sharing from the field.
Security management| Tamper-proof security profile with user password
(permanent or renewable) and custom property message.
PACKAGED FOR EFFICIENCY
- Singlemode OTDR port
- Swap out connector screw
- Testing LED indicator
- Stylus
- Power meter
- Visual fault locator
- 10/100 Mbit/s Ethernet port
- Two USB 2.0 ports
- AC adapter
- Home/switch application and screen capture (hold)
- Power on/off/stand by
- Built-in WiFi/Bluetooth
- Battery LED status
- Stand support
SPECIFICATIONS a
TECHNICAL SPECIFICATIONS
Display| 7-in (178-mm) outdoor-enhanced touchscreen, 800 × 480 TFT
Interfaces| Two USB 2.0 ports
RJ45 LAN 10/100 Mbit/s
Storage| 2 GB internal memory (20 000 OTDR traces, typical)
Batteries| Rechargeable lithium-polymer battery
12 hours of operation as per Telcordia (Bellcore) TR-NWT-001138
Power supply| Power supply AC/DC adapter, input 100-240 VAC, 50-60 Hz, 9-16 V
DCIN 15 Watts minimum
Wavelength (nm) b| 1310 ± 30/1550 ± 30/1650 ± 15
Live wavelength (nm)| 1650
Isolation: 50 dB from 1265 nm to 1617 nm
Dynamic range (dB) c| 32/30/30
Event dead zone (m) d| 0.9
Attenuation dead zone (m) d| 3.6
Distance range (km)| 0.1 to 200
Pulse width (ns)| 3 to 20 000
Linearity (dB/dB)| ±0.05
Loss threshold (dB)| 0.01
Loss resolution (dB)| 0.001
Sampling resolution (m)| 0.04 to 5
Sampling points| Up to 256 000
Distance uncertainty (m) e| ±(0.75 + 0.005 % × distance + sampling resolution)
Measurement time| User-defined
Reflectance accuracy (dB) b| ±2
Typical real-time refresh (Hz)| 3
IN-LINE POWER CHECKER b, f, i
Power range (dBm)| –60 to 23
Power uncertainty (dB) g, h| ±0.5
Calibrated wavelengths (nm)| 1310, 1490, 1550, 1625, 1650
Selectable wavelengths (nm)| 1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410,
1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1577, 1590, 1610, 1625, 1650
Tone detection| CW, 270 Hz, 330 Hz, 1 kHz, 2 kHz
TECHNICAL SPECIFICATIONS (in-line PON power meter with OPM2
in option) b, **i**
Power range (dBm)| –60 to 23
PON power meter (nm)| Two channels: 1490/1550 and 1490/1577
Power uncertainty (dB) h, i| ±0.5
Calibrated wavelengths (nm)| 1310, 1490, 1550, 1625, 1650
Selectable wavelengths (nm)| 1310, 1490, 1550, 1577, 1625, 1650, 1490/1550,
1490/1577
- All specifications valid at 23 °C ± 2 °C with an FC/APC connector, unless otherwise specified.
- Typical.
- Typical dynamic range with longest pulse and three-minute averaging at SNR = 1.
- Typical, for reflectance from –55 dB, using a 3-ns pulse.
- Does not include uncertainty due to fiber index.
- Not available when OPM2 is selected.
- At calibrated wavelengths.
- Requires a good entry connector’s health.
- Specifications valid when OTDR not in operation or in idle mode.
IN-LINE SOURCE
Output power (dBm) an 8
Modulation CW, 270 Hz, 330
Hz, 1 kHz, 2 kHz
GENERAL SPECIFICATIONS
Size (H × W × D)| 166 mm × 200 mm × 68 mm (6 9/16 in × 7 7/8 in × 2 3/4 in)
Weight (with battery)| 1.5 kg (3.3 lb)
Temperature Operating
Storage
| –10 °C to 50 °C (14 °F to 122 °F)
–40 °C to 70 °C (–40 °F to 158 °F) b
Relative humidity| 0 % to 95 % non-condensing
BUILT-IN POWER METER SPECIFICATIONS (GeX) (optional)
c
Calibrated wavelengths (nm)| 850, 1300, 1310, 1490, 1550, 1625, 1650
Power range (dBm) d| 27 to –50
Uncertainty (%) e| ±5 % ± 10 nW
Display resolution (dB)| 0.01 = max to –40 dBm
0.1 = –40 dBm to –50 dBm
Automatic offset nulling range d, f| Max power to –30 dBm
Tone detection (Hz)| 270/330/1000/2000
ACCESSORIES (optional)
GP-10-061| Soft carrying case| GP-2209| Spare battery
GP-10-072| Semi-rigid carrying case| GP-2240| Utility glove
GP-10-100| Rigid carrying case| GP-2242| Replacement hand strap
GP-1008| VFL adapter (2.50 mm to 1.25 mm)| GP-2243| Spare AC/DC adapter
(specify country power cord)
GP-2155| Carry-on size backpack| GP-3115| Kickstand
GP-2205| DC vehicle battery-charging adaptor (12 V)| GP-3207| Replacement APC
Swap-Out connector
GP-2208| Spare stylus| GP-3208| Replacement UPC Swap-Out connector
VISUAL FAULT LOCATOR (VFL) (optional)
Laser, 650 nm ± 10 nm
CW/Modulate 1 Hz
Typical Pout in 62.5/125 µm: > –1.5 dBm (0.7 mW)
Laser safety: Class 2
LASER SAFETY (Complies with FDA 1040.10 and IEC 60825-1:2014)
- Typical output power is given at 1550 nm.
- –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack.
- At 23 ºC ± 1 ºC, 1550 nm and FC connector. With modules in idle mode. Battery operated after 20-minute warm-up.
- Typical.
- At calibration conditions.
- For ±0.05 dB, from 10 °C to 30 °C.
ORDERING INFORMATION
- Please refer to the iOLM specification sheet for the complete and most recent description of these value packs. Only available if iOLM or Oi base software option is selected.
- Only available if power meter option is selected. Additional connector adapters available: contact EXFO
- Not available in China.
- RF option is mandatory and automatically included if FP435B fiber inspection scope model is selected.
- This list represents a selection of fiber inspection tips that covers the most common connectors and applications but does not reflect all the tips available. EXFO offers a wide range of inspection tips, bulkhead adaptors and kits to cover many more connector types and different applications. Please contact your local EXFO sales representative or visit www.EXFO.com/FIPtips for more information.
- Included when APC base tips are selected.
- Included when UPC base tips are selected.
- Includes ConnectorMax2 software.
EI CONNECTORS
To maximize the performance of your OTDR, EXFO recommends using APC connectors
on singlemode port. These connectors generate lower reflectance, which is a
critical parameter that affects performance, particularly in dead zones. APC
connectors provide better performance than UPC connectors, thereby improving
testing efficiency.
Note : UPC connectors are also available. Simply replace EA-XX by EI-XX in the ordering part number. Additional connector available: EI-EUI-90 (UPC/ST).
EXFO headquarters
- T +1 418 683-0211
- Toll-free +1 800 663-3936 (USA and Canada)
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.
For the most recent patent marking information, please visit www.EXFO.com/patent. EXFO is certified ISO 9001 and attests to the quality of these products. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.
For the most recent version of this spec sheet, please go to www.EXFO.com/specs. In case of discrepancy, the web version takes precedence over any printed literature.
© 2024 EXFO Inc. All rights reserved. Printed in Canada 24/06
FAQ
1. What is the warranty period for MaxTester 715D OTDR?
The product comes with a 3-year warranty ensuring coverage for any
manufacturing defects.
2. Can the connectors be replaced in the MaxTester 715D OTDR?
Yes, the device features a Swap-Out connector that can be replaced whenever
necessary for optimal performance.
3. What are the applications of the MaxTester 715D OTDR?
The device is suitable for various applications including FTTx installations,
network testing, and troubleshooting in CATV/HFC networks.
References
- Contact | EXFO
- So You Think Fiber Inspection is a Hassle? | Video | EXFO
- Virtual patent marking | EXFO
- Environmental, social and governance (ESG) impact at EXFO | EXFO
- Technical documentation | Resources | EXFO