EXFO FTBx-9110 Mems Optical Switch Instructions

EXFO FTBx-9110 Mems Optical Switch

Product Information
The FTBx-9110 is a MEMS optical switch that provides highly accurate and repeatable fiber-to-fiber switching. It is designed to ensure efficient and reliable switching between different optical fibers.

Key Features

• High accuracy and repeatability
• MEMS technology for reliable switching

Specifications

Here are the specifications of the FTBx-9110:

Product Usage Instructions

To use the FTBx-9110 MEMS optical switch, please follow the instructions below:

1. Ensure that the device is properly connected to the power source and any necessary external equipment.
2. Connect the input optical fibers to the appropriate input ports of the switch.
3. Connect the output optical fibers to the desired output ports of the switch.
4. Power on the device and wait for it to initialize.
5. Use the provided control interface or software to select and activate the desired fiber-to-fiber switching configuration.
6. Monitor the status indicators or feedback from the control interface to verify the successful switching operation.
7. If required, repeat steps 5 and 6 to switch to different fiber-to-fiber configurations.
8. When done, power off the device and disconnect any connected fibers.

For detailed information on the control interface and software usage, refer to the separate user manual provided with the product.

Provides highly accurate and repeatable fiber‑to‑fiber switching.

KEY FEATURES

• Singlemode 1×N up to 1×12
• Fast switching time of < 30 ms
• Product lifespan of more than 1×109 cycles
• Variety of connector options

RELATED PRODUCTS AND ACCESSORIES

MEMS-BASED DESIGN

With its MEMS-based design, EXFO’s FTBx‑9110 delivers durable performance in a compact package. Fast switching time and a 1-billion-cycle product lifespan make it the perfect optical switch for demanding manufacturing applications. The FTBx‑9110 MEMS optical switch is available for singlemode fibers with a choice of 1×2, 1×4, 1×8 and 1×12 modules.

The 1×N configurations provide precise optical switching between one common port and N input/output ports—perfect for multiple-component or ribbon-fiber testing.

SUPPORTING VARIOUS APPLICATIONS

Optical switches are basic components integrated in almost every test station. The FTBx-9110 offers the specifications and features to support a wide variety of applications. Choose it to:

• Analyze transmitted signals using several types of test instruments, such as an optical spectrum analyzer and a bit-error-rate tester
• Reconfigure an R&D or manufacturing test station to allow testing of several types of devices
• Test multiple devices under test (DUTs) in parallel

LABORATORY AND FIELD PLATFORMS

The FTBx-9110 is designed to be used with LTB‑2, LTB‑8, LTB‑12 or FTB‑4 Pro platforms. EXFO platforms are highly scalable and (except FTB-4 Pro) feature hot-swap capabilities for no downtime or interruption in tests, and greatly improved efficiency.
The FTBx-9110 can easily be remote-controlled by means of the standard LAN or GPIB interface using SPCI commands, IVI drivers or any other automation software.

SPECIFICATIONS

1.6
Operating wavelength (nm)|  | 1240 to 1680|
Repeatability (dB) e|  | ±0.02|
Backreflection (dB) c|  | –50|
Crosstalk (dB) (typical)|  | 50 (60)|
Polarization-dependent loss (dB) c, f|  | 0.15|
Switching time (ms) c|  | < 30|
Fiber type|  | Singlemode 9/125 µm|
Input power (damage threshold) (dBm)|  | 27|

GENERAL SPECIFICATIONS

Temperature        Operating

Storage

| 0 °C to 40 °C (32 °F to 104 °F)

—40 °C to 70 °C (—40 °F to 158 °F)

Maximum relative humidity| 80 % non-condensing at 40 °C
Instrument drivers| IVI drivers, SCPI commands and REST API
Remote control| Via LTB and FTB platform services: GPIB (IEEE-488.1, IEEE-488.2), Ethernet and RS-232
Standard accessories| User guide g and test report

• Specifications valid at 23 °C ± 2 °C.
• Insertion loss per module, including one connector. For guaranteed specification, add 0.55 dB.
• Typical specifications.
• From 1240 to 1260 nm and 1650 to 1680 nm, add 0.5 dB insertion loss (typical).
• Repeatability values are for 100 cycles per switch module at constant temperature with stabilized source/meter.
• At 1550 nm.
• Available online only.

ORDERING INFORMATION

• FC connectors are available for 2 and 4 channels configuration only.

EXFO headquarters T +1 418 683-0211 Toll-free +1 800 663-3936 (USA and Canada)
EXFO serves over 2000 customers in more than 100 countries. To find your local office contact details, please go to www.EXFO.com/contact.

For the most recent patent marking information, please visit www.EXFO.com/patent. EXFO is certified ISO 9001 and attests to the quality of these products. EXFO has made every effort to ensure that the information contained in this specification sheet is accurate. However, we accept no responsibility for any errors or omissions, and we reserve the right to modify design, characteristics and products at any time without obligation. Units of measurement in this document conform to SI standards and practices. In addition, all of EXFO’s manufactured products are compliant with the European Union’s WEEE directive. For more information, please visit www.EXFO.com/recycle. Contact EXFO for prices and availability or to obtain the phone number of your local EXFO distributor.

For the most recent version of this spec sheet, please go to www.EXFO.com/specs.
In case of discrepancy, the web version takes precedence over any printed literature.

FTBX9110.3EN © 2023 EXFO Inc. All rights reserved. Printed in Canada 23/02

References

• Contact | EXFO
• Virtual patent marking | EXFO
• Environmental, social and governance (ESG) impact at EXFO | EXFO
• Technical documentation | Resources | EXFO

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>