domli ID2 Wood Top with Hairpin Legs Installation Guide
- May 15, 2024
- domli
Table of Contents
domli ID2 Wood Top with Hairpin Legs
Tools You’ll Need
Electric Impact Screwdriver (Recommended)
Manual Screwdriver
OR
What’s Included
-
1 Wood Top
-
3 Shoulder Hairpin Legs
-
Black Pan Head Screws M5 x 25mm
Installation
Safety First!
- Use caution when handling heavy or bulky components to prevent injury or damage to yourself and the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Please follow the provided instructions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or damages before assembly, and contact us if you notice any issues.
- Please do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or contact us for further assistance.
- Do not sit or stand on the product.
- This product is not intended to support people or heavy objects. Avoid placing excessive weight to prevent damage and instability. MAX 40 Kg
-
Please read the Safety Guidelines stated above before you start assembling the product. To prevent scratching of the surface, place the wood top on a protected surface. Ensure that there is ample space around the top for you to work comfortably.
-
Center and align the legs with the pilot holes. There is a certain level of tolerance between each component.
The legs are matched to the top before dispatch. To ensure that the legs are properly aligned with the holes, it is recommended that you place each leg over the accompanying holes to ensure that the fittings marry up before securing them. You may need to try placing the legs in different locations to achieve the best fit.
-
Reposition the legs and fasten them to the top using the provided pan head screws and an electric / impact screwdriver. Tighten the screws to 60%, when all are in position, you can then fully tighten. Avoid over-tightening the screws.
Finally, with the assistance of another person, lift the product and stand it upright.
Now, sit back, relax and enjoy your new purchase!
Documents / Resources
|
domli ID2 Wood Top with Hairpin
Legs
[pdf] Installation Guide
ID2 Wood Top with Hairpin Legs, ID2, Wood Top with Hairpin Legs, Hairpin Legs
---|---