domli R2 Wood Top with Pedestal Legs Installation Guide
- June 5, 2024
- domli
Table of Contents
**domli R2 Wood Top with Pedestal Legs Installation Guide
**
Tools You’ll Need
Electric Impact Screwdriver (Recommended)
**OR
** Manual Screwdriver
8 mm Allen Key
-
1 x Wood Top
-
1 x Pedestal Top Plate
-
1 x Pedestal Base
-
1 x Pedestal Upright
-
4 x Pan Head Screws M5 x 25mm
-
6 x M 8 Threaded Bolts
-
4 x Rubber Feet
Installation Guide
Safety First!
- Use caution when handling heavy or bulky components to prevent injury or damage to the product.
- Always wear protective equipment, such as gloves or safety glasses, when using power tools to avoid accidents.
- Do not over-tighten screws or bolts, as this can damage the components or compromise the stability of the product.
- Follow the manufacturer’s instruc- tions carefully to ensure proper assembly and use of the product.
- Keep small parts away from children or pets, as they can be a choking hazard.
- Inspect the product for any defects or damages before assembly, and contact the manufacturer if you notice any issues.
- Do not modify the product or use it for any purpose other than its intended use.
- Use caution when working with sharp tools or edges, and keep them away from children and pets.
- If you are uncertain about any aspect of the assembly process, seek assistance from a professional or the manufacturer’s customer service.
- Table top can’t support people or heavy objects. Avoid placing excessive weight to prevent damage and instability.
Do not sit or stand on the table.
-
Please read the Safety Guidelines stated above before you start assembling the product. To prevent scratching of the surface, place the wood top on a protected surface. Ensure that there is ample space around the top for you to work comfortably.
-
Fasten the pedestal base to one end of the upright using 3x M8 Allen bolts. Attach the rubber feet to the base. Avoid over-tightening the bolts.
-
Align the 3 holes in the cylindrical upright with the holes in the Top Plate until it sits square with the base legs.
Fasten the Top Plate to the upright using the M8 Allen bolts using a 8mm Allen Key. 3x fittings are located to both ends of the cylindrical upright. Please ensure all bolts are threaded correctly before tightening, to avoid misalignment.
-
Align the top plate holes to the pilot holes and secure it to the wood top using the provided pan head screws and an electric impact screwdriver.
Tighten the screws to 60%, when all are in position, you can then fully tighten. Avoid over-tightening the screws.
Finally, lift the product and stand it upright.
Now, sit back, relax and enjoy your new purchase!
Documents / Resources
|
domli R2 Wood Top with Pedestal
Legs
[pdf] Installation Guide
R2 Wood Top with Pedestal Legs, Wood Top with Pedestal Legs, Top with Pedestal
Legs, Pedestal Legs, Legs
---|---