TT Audio KRT-WH 001 Cart With Wheels Owner’s Manual
- July 22, 2024
- TT Audio
Table of Contents
TT Audio KRT-WH 001 Cart With Wheels
FAQ
- Q: Can I dispose of the product with household waste?
- A: No, according to the WEEE directive and national laws, the product should not be disposed of with household waste.
- Q: How many modules can be placed on the cart?
- A: Up to 4 modules can be placed on the cart in COMPRESSION or TENSION mode.
- Q: Who should install this product?
- A: TT+ Audio strongly recommends that the product be installed by professional qualified installers or specialized firms to ensure correct installation and compliance with regulations.
SAFETY PRECAUTIONS AND GENERAL INFORMATION
The symbols used in this document give notice of important operating instructions and warnings which must be strictly followed.
IMPORTANT NOTES
This manual contains important information about the correct and safe use of the device. Before connecting and using this product, please read this instruction manual carefully and keep it on hand for future reference. The manual is to be considered an integral part of this product and must accompany it when it changes ownership as a reference for correct installation and use as well as for the safety precautions. TT+ Audio will not assume any responsibility for the incorrect installation and / or use of this product.
IMPORTANT NOTES
Suspending any object is a potentially dangerous operation and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of rigging objects overhead. TT+ Audio strongly recommends that all speakers should be suspended taking into account all current national, federal, state and local regulations. It is the responsibility of the installer to ensure that all speakers are safely installed in accordance with all such regulations. TT+ Audio strongly recommends to inspect the system at least once a year. If any sign of weakness or damage is detected remedial actions should be taken immediately.
The user is responsible for making sure that the supporting surfaces and any additional hardware used is capable of supporting the system. Any hardware used to suspend a loudspeaker array that is not provided by or associated with TT+ Audio is not reccomended and is under the responsibility of others.
SAFETY PRECAUTIONS
- Read these instructions
- Keep these instructions
- Heed all warnings
- Follow all the instructions
- Install in accordance with manufacturer’s instructions
- Only use attachments and accessories specified by the manufacturer
- All the precautions, in particular the safety ones, must be read with special attention, as they provide important information.
Never attempt to carry out any operations, modifications or repairs that are
not expressly described in this manual.
TT+ Audio strongly recommends this product is only installed by professional
qualified installers (or specialised firms) who can ensure correct
installation and certify it according to the regulations in force.
IMPORTANT NOTES: TT+ Audio declines all responsabilities if the user applies this accessory to other configurations not mentioned in this manual.
TT+ Audio reserves the right to make changes without prior notice to rectify
any errors and / or omissions.
Always refer to the latest version of the manual on
www.TT+Audio.it.
INSTALLATION
PLACING THE MODULES ON THE CART
- Up to 4 modules can be placed on the cart in COMPRESSION or TENSION mode.
- Either the mode is COMPRESSION or TENSION, the lowest module needs to be connected to the cart with two pins on the front brackets and one pin on the rear bracket.
TENSION MODE
- To place the modules on the cart in TENSION mode, the cart rear bracket needs to be pulled up and locked with a Quick Lock Pin A.
- Lock the module on the cart with two Quick Lock Pin in the connection pontis indicated in the image.
WARNING! CAUTION! The system should always be installed by qualified and experienced personnel having the technical know-how or enough specific instructions in order to prevent any danger.
COMPRESSION MODE
- To place the modules on the cart in TENSION mode, the cart rear bracket needs to be layed down and locked with a Quick Lock Pin A.
- Lock the module on the cart with two Quick Lock Pin in the connection pontis indicated in the image.
WARNING! CAUTION! The system should always be installed by qualified and experienced personnel having the technical know-how or enough specific instructions in order to prevent any danger.
- During transportation ensure the rigging components are not stressed or damaged by mechanical forces. Use suitable transport cases. We recommend the use of KRT-WH 001 for this purpose.
- Due to their surface treatment the rigging components are temporarily protected against moisture. However, ensure the components are in a dry state while stored or during transportation and use.
- Do not stack more than four GTX 12 on one Cart.
- Exercise extreme caution when moving stacks of four cabinets with the kart to avoid tipping.
- Do not move stacks in the front-to-back direction of the GTX 12 (long side); always move stacks sideways to avoid tipping.
CAUTION
- Always make sure all Quick Lock Pins are correctly inserted before moving the cart.
- GTX12 must be loaded only on KRT-WH 001. Up to 4X GTX 12 can be loaded on one kart. Use with other equipment or overloading may result in instability causing injury.