HALCYON P700 4KA LED High Bay Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
P700 4KA LED High Bay
Instruction Manual
P700 4KA LED High Bay
INSTALLATION INSTRUCTIONS
Product Name: LED High Bay
Model #: P700 4KA, P700 4KA4P, P700 57KA
Description: 77/96/111/132/150W LED, IP65, 4000K or 5700K
Rated Voltage: 220-240V–, 50/60Hz 
- Turn power off.
- Use a flat-blade screwdriver to open the plug, change power by setting dip switches according to power setting table, and then close the plug tightly.
- Install the suspension kit.
- Plug in the power cord.
- Switch luminaire on to test luminaire functions correctly and is electrically safe.
Installation note: Do not install on the same circuits as Metal halide,
Fluorescent and other “Low power factor” devices.
When installed on the same circuit it can cause flickering and/or premature
failure of the “high power factor” electronic drivers. The harmonic distortion
from low power factor devices alters the Waveform of the AC supply which can
cause componentry in high power factor electronic drivers to resonate, run
over temperature and fail after prolonged exposure.
WARNING: FIRE RISK EXISTS IF THE LAMP IS COVERED BY OR POSITIONED CLOSE TO
CURTAINS OR OTHER COMBUSTIBLE MATERIALS.
Documents / Resources
|
HALCYON P700 4KA LED High
Bay
[pdf] Instruction Manual
P700 4KA LED High Bay, P700 4KA, LED High Bay, High Bay
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>