Cellcom Cellular weBoost App User Guide
- July 20, 2024
- Cellcom
Table of Contents
Cellcom Cellular we Boost App User Guide
Thank you for your purchase. For the best experience, please follow the manufacturer’s installation guide. In instances where the we Boost App is referenced, use the instructions below to setup your new cellular booster. The we Boost App is not supported.
Find the nearest cell tower (strongest cellular signal)
RSRP is a metric used to measure the power of the cellular signal that your
smartphone receives from the nearby cell tower. The power of your cellular
signal directly impacts the performance of your cellular booster.
Use your Cellcom smartphone, along with the chart, recommended antenna
direction and instructions below, to find the location outside your home where
RSRP is the strongest.
Installation Address:_ _____
Recommended Antenna Direction:__ _
Point the outdoor antenna to the direction of the best signal. If you cannot find an area outside your home with a signal, this solution is not likely to improve your indoor service.
Apple iPhone
- Confirm your Cellcom phone is not connected to Wi-Fi
- Open the Phone app
- Dial 3001#12345# then tap Send
- Tap RsrpRsrqSinr
- Monitor the RSRP value as you walk around the exterior of your home and note where the signal is the strongest. If RSRP is not in your menu, please restart phone and attempt again.
Location:_____
Signal Strength (RSRP):___
Figure 1 – Field test mode as viewed in iOS 17, if you have a different iOS version, the menu options may vary.
Android Smartphone
- In the Google Play Store, search for the Network Cell Info Lite application by M2Catalyst
- Download and open the Network Cell Info Lite application and accept all permissions
- Confirm the Gauge tab is selected along the top
- Monitor the RSRP, db value as you walk around the exterior of your home
Location :_____
Signal Strength (RSRP):__
Product Technical Support
Cellcom Customer Care
S upport Center :
https://[www.cellcom.com](http://www.cellcom.com)/contact Phone:
1-800-236-0055 or 611 from your Cellcom
phone
Cellular Booster Registration
Once you have installed your cellular booster, you will need to register it
with Cellcom. This will automatically grant you the approval required by the
FCC to use a commercial cellular booster.
Registration Link: Cellcom Consumer Signal Booster Registration:
https://[www.cellcom.com](http://www.cellcom.com)/booster Registration.html
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>