RUSKIN BTD830 Authority in Air Control Instructions

Table of Contents

RUSKIN-BTD830-Authority-in-Air-Control0-product

Storage Requirements:

Receiving

Visually inspect the crating and product for damage before signing for receipt.
Document any damage or discrepancies and notify Ruskin and the shipping company promptly.
Verify models and quantities against the packing list and purchase order upon unloading.
Sign the delivery receipt after guidance from Ruskin and the freight company in case of damage.

Storage

Inspect each unit for loose or missing hardware, wiring, or tubing before storage or installation.
Ensure the storage area meets specific product requirements by following these guidelines:
- Store in a controlled area.
- Provide adequate space for dampers.
- Maintain a clean, dry, and well-ventilated environment.
- Protect products from extreme temperatures and moisture; avoid direct sunlight exposure.
- Keep away from corrosive substances and chemicals.
- Cover with protective material to prevent dust accumulation.
- Use suitable storage containers or packaging to prevent damage from impact or vibration.
- Avoid stacking dampers or placing heavy items on top of them.

Q: What should I do if I find damaged items upon receipt?
- A: If you discover any damage or missing items, contact Ruskin Representative or call Ruskin @ 1-(816)-761-7476 immediately to report the issue and follow their guidance on the next steps.
Q: Can I store the products in an area with high humidity?
- A: It is recommended to store the products in a dry environment with proper ventilation to prevent moisture damage. Avoid storing in areas with high humidity to maintain product integrity.

Provide general guidance for inspection and storage of Ruskin products upon receipt.
To report damage or missing items contact your Ruskin Representative or call Ruskin @ 1-(816)-761-7476 and follow the prompts.

Prior to signing for receipt of Ruskin product:

a. Visually inspect the crating and visible product for any signs of damage.
b. Document any damage or discrepancies discovered, and promptly notify Ruskin and the shipping company.
c. Unload product from freight vehicle and verify models and quantities as per the packing list and purchase order.
d. Sign the delivery receipt (upon guidance from Ruskin and Freight company if damage exists) of the product.

Upon receipt of Ruskin product:

a. Before placing units in storage or installing, inspect each unit for loose or missing hardware, and damage to any wiring or tubing that may not have seen due to crating (contact Ruskin if required).
b. Ensure that the storage area is suitable for the specific requirements of the products.

Store in a controlled area.
Ensure storage is large enough for dampers.
Storage should be clean, dry, and well-ventilated.
Product must be protected from extreme temperatures (above maximum operating temperatures) and should avoid direct exposure to moisture and direct sunlight.
Store away from corrosive substances and chemicals.
Cover with protective material to prevent dust and debris from accumulating.
Use appropriate storage containers or packaging to protect products from impact, vibration, or other potential hazards.
Do not stack dampers or stack items of excessive weight on dampers.

3900 Doctor Greaves Road