amber connect Dual AI 4G Telematics HD Dashcam User Guide
- July 20, 2024
- amber connect
Table of Contents
amber connect Dual AI 4G Telematics HD Dashcam
Packing List
Please check the product model you purchased carefully as the packing list varies with the model.
Overview
- AVC425 series uses 4G network for communication. For these dual-channel digital video recorders (DVRs), except to be able to record simultaneously, the two cameras can also record locally and live stream remotely at the same time. Several safety features are included in the system, including DMS, ADAS, exception alerts, and more.
- Furthermore, the 4G capability of the device enables seamless video streaming, live audio alerts, rapid data upload, route replay, and video history playback. With all of these features, fleet managers can coach drivers based on data and improve operations to unlock more benefits, whether they’re managing government, logistics, ride-hailing, or taxi fleets.
Appearance and LEDs
Main Unit
Subcamera Options
Product Model | AVC420 | Integrated Version |
---|---|---|
**** Camera | 1280×720/15FPS/F2.5/Full |
color in day time and monochrome in dim light No remote camera
| ****
Usage| Monitor the cabin
Product Model| AVC425| DMS Version
---|---|---
Camera| ****
1280×720/15FPS/F2.0/Full
c o l o r i n d a y t i m e a n d monochrome in dim l ight
|
Usage| Monitor the cabin
Product Model| AVC425| DMS Version
---|---|---
Camera| 1280×720/10FPS/monochrome all day|
Usage| Monitor the Driver
Refer to the specifications and features of the product model you purchased. If you have any questions, please contact your supplier.
LEDs
LED | Color | Connotation | Status |
---|---|---|---|
Power | Red | Solid on | Device powered on (ACC ON) |
On for 0.5s and off for 10s | Device in sleep mode | ||
On for 1s and off for 1s | No TF card detected or TF card damaged | ||
OFF | No power connected | ||
Network | Blue | Solid on | Connection to server succeeded |
**** |
On for 5s and off for 1s
| GSM and GPRS networks are available, but connection to server failed
---|---|---|---
On for 1s and off for 1s| Only GSM network is available
Off
| ****
GSM network is unavailable
GNSS
| ****
Green
| Solid on| Location succeeded
On for 1s and off for 1s| Device is locating/location
failed
Wirings
Cable | Definition | Color | Usage |
---|
Power
| B+| Red| To battery positive (9-30V), power input
GND| Black| To battery negative, power input
ACC| Yellow| To ACC ON/Positive {9~30V), power input
Relay| Green| To relay for remote power and fuel cutoff
TTL(optional)| I/O| /| To peripherals, such as oil sensor, card reader, etc.
SOS| SOS| SOS| To the external SOS key .
Camera (optional)| Remote camera| /| Monitor the cabin
AVC420 can not use this wire
Specifications and Features
Specifications
Category | Item | Parameter | Remarks |
---|---|---|---|
Hardware | Memory | 1GB+16GB | / |
AVC425-E | 4G | FDD:B1/B3/B5/B7/B8/B9/B20 |
IDD:B38/B39/B40/B41(100M )
3G| WCDMA: B1/B2/B5/B8
2G| GSM: 850/900/1800/1900
AVC425-LA| 4G| FDD: B2/B3/B4/B5/B7/B12/B17
IDD: B38/B41(100M)
3G| WCDMA: B2/B4/B5
2G| GSM: 850/1800/1900
WiFi| 2.4 GHz| 802.11/b/g/n
GNSS| Support| GPS/BDS
Microphone| Support| For remote voice communication
Speaker| Support| To notify drivers of status or events
Interface/Key| Reset key| Support| On the main unit
Interface| Micro USB| For commissioning and upgrade
Others| Power supply| Fuse Box| B+/ACC/GND
Supply voltage| DC 9-30V| /
Operating temperature| -20°c ~+65°c| /
Features
No | Feature | Description |
---|---|---|
1. | Video recording | This enables the device to record in loop when the |
vehicle is moving.
2.| Live video| This enables the device to live stream images captured by
cameras via the LTE network to the platform (web or app).
3.| Tracking| This enables the device to upload location data and motion
information via the mobile network to the platform for analysis.
4.| Event alert| This enables the device to upload alert messages and video
files to the platform when an event is triggered by collision, vibration,
dangerous driving behavior, emergency, OMS reminder, speeding, etc.
5| SOS call| This enables the driver to notify the platform at the earliest
time possible, make a call, and activate video recording when an emergency
occurs.
6| Remote control| This enables the user to deliver a lock command to the
device via the platform (web or app) to remotely cut off the fuel and power to
the vehicle when an exception occurs.
Note : For details about features, refer to the operation guide.
Installation
Precautions
- This device is not suitable for battery electric vehicles (BEVs) and hybrid electric vehicles (HEVs).
- Use accessories specified by the manufacturer only.
- The standard supply for the device is DC9~30V, please use the original power cable and ensure that 1he positive and negative ends are correctly wired.
- Remove the protective film on the remote camera before installation.
- It is recommended to ask a distributor, a designated business, or an expert to do the installation and commissioning.
Preparation
Device check
Check visually whether the device is in good condition and whether the
relevant accessories are complete.
SIM Card Attachment
Ensure that the device is ACC OFF before attaching a proper SIM card. In
addition, the SIM should have data service activated and not in arrears.
Note : Fit the Nano-SIM into the tray and insert them into the SIM slot.
To remove the card tray, use the ejector tool.
TF Card Attachment
Ensure that the device is ACC OFF before attaching a proper TF card.
Note
- Use a TF card in speed class 10 or higher and with a capacity of 32GB or above.
- The TF card is recommended to change every half a year to ensure the recording performance of the device.
- Mount the tamper cover after the attachment. Fit the TF card in the correct slot.
Main Unit Installation
- Connect the power cable of the device to B+, ACC, and GND of the fuse box on the vehicle. 1 is a reference position.
- Route the power cable along the A pillar of the vehicle to the upper center of the front windshield. The red dashed line (2) in the figure is for reference.
- Select a proper installation position and wipe the position clean. Remove the protective film from the 3M tape of the mounting base and attach it to the position. Wait for 2 hours before proceeding to the next step. See 3 for reference.
- Mount the device to the base and connect its power cable correctly (see 4 for reference). Then fasten the cable securely.
Installation of Accessories
You can select a proper position to install the remote camera according to
actual conditions
Remote AHD Camera
- Face the camera inward and install it to the windshield behind the rear-view mirror (as shown in 1) or to the middle of the dashboard (as shown in 2). Wipe a selected position clean, remove the protective film from the 3M tape, and attach the device.
- Use the supplied screwdriver to tighten the screw of the camera, so it keeps at the best angle. Connect the cables correctly and fas1en them securely.
DMS Camera
This section is dedicated to AVC425.
The DMS camera is mainly used for monitoring the driver. Fixate the camera at
an angle of about 30″ to the steering wheel directly facing the driver’s head,
as the following figure shows.
- Face the camera inward and install it to the windshield behind the rear-view mirror (as shown in ① ) or to the middle of the dashboard (as shown in ② ). Wipe a selected position clean, remove the protective film from the 3M tape, and attach the device.
- Use the supplied screwdriver to tighten the screw of the camera, so it keeps at the best angle. Connect the cables correctly and fasten them securely.
JC170·DMS·Camera
The DMS camera is mainly used for monitoring the driver. Fixate the camera at
an angle about 30° to the steering wheel directly facing the driver’s head, as
the following figure shows.
Other Accessories
-
SOS key
It is used to seek help in emergencies. Connect the SOS key to the corresponding interface on the device, remove the protective film from the 3M tape, and then attach it to a proper position (such as ① in the above figure). -
Relay
It is used to cut off the power and fuel of the vehicle remotely to force it to stop. Connect it to the corresponding interface on the device and place it in a proper position, such as ② in the above figure. For wiring details, see the wiring diagram. -
TTL
It is used to connect to an external device for function expansion when a scenario requires a feature that cannot be offered by the device. ③ is a reference installation position.
Note
- Choose proper accessories based on your actual needs.
- Select a relay that goes perfectly with the battery of your vehicle.
- It is recommended to ask a distributor, a designated business, or an expert to do the installation and commissioning.
Commissioning
- Check the LED, see main unit for reference.
- Check the camera: The camera works correctly if you can view the live video of the camera and switch between the two cameras after logging in to the platform. You can also manually adjust the camera according to your needs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>