Xhorse XSNI Universal Remote Key User Manual
- July 18, 2024
- Xhorse
Table of Contents
Xhorse XSNI Universal Remote Key
Product Information
Product Specifications:
- Model: XSNI Universal Remote Key
- Battery Type: CR2032, 3V
- Frequency Band: RFID 433.92 MHz
- Max Power: -27.76 dBm
Product Usage Instructions
Changing the Battery:
- Press the backside button to release the mechanical key holder.
- Use a tool to separate the shell and access the battery compartment.
- Remove the old battery (CR2032, 3V) and replace it with a new one, ensuring correct polarity.
- Reassemble the key as before.
Pairing Method:
To pair with a vehicle, refer to the corresponding vehicle models for matching
instructions.
FCC Statements:
- Reorient or relocate the receiving antenna.
- Increase the separation between the key and receiver.
- Connect to a different circuit outlet than the receiver.
- Consult a dealer or technician for assistance.
CE & UKCA Statements:
The device complies with EU power limits and operates at RFID 433.92 MHz.
FAQ (Frequently Asked Questions):
-
Q: What battery type does the XSNI Universal Remote Key use?
A: The key uses a CR2032 battery with a voltage of 3V. -
Q: How do I pair the remote key with my vehicle?
A: Refer to the user manual of your vehicle for specific pairing instructions based on the model.
Overview
- XSNI Universal Remote Key is suitable for a vehicle which contains the Xhorse receiver.
- Note: The operating temperature of the product is -20–50℃.
Button description
| 1 | Panic button |
|---|---|
| 1 | Unlock button |
| 3 | Lock button |
Change battery
First use or when the battery runs out need to change a new battery, following steps:
-
Press the back side button for lose the mechanical key holder
-
Use the tool into the gap to separate the shell
-
Take the battery out and replace a new one
Note: The battery type is 2032 with 3V, ensure the positive and negative of the battery is correct. -
Install the key the same as before
Pairing method
Pairing with vehicle:
Referring to the corresponding vehicle models to match.
FCC statements
15.19 Labelling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable devices:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
CE & UKCA statements:
Frequency Band(s)
This device operates with the following frequency bands and maximum frequency
power.
Note:
The product is compliant with these power limits required by the European
Union. Frequency bands supported by the product vary by model.
- RFID (433.92 MHz) Max Pe.r.p. is -27.76 dBm.
EU & UKCA DECLARATION OF CONFORMITY
Hereby, Shenzhen Xhorse Electronics Co., Ltd. declares that Universal Remote Key with model XSNI complies with Directive 2014/53/EU, 2011/65/EU, and RER 2017 (SI2017/1206).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>