SANGEAN DDR-75BT Desk Radio DAB Instructions

: July 17, 2024
: Sangean

Table of Contents

Installation
Important safety instructions
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SANGEAN DDR-75BT Desk Radio DAB Instructions

Installation

Important safety instructions

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet. Consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments / accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged. Liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not Expose This Appliance to Rain or Moisture.
The Shock Hazard Marking and Associated Graphical Symbol is provided on the rear of unit.
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, shall be placed on the apparatus.
Excessive sound pressure on ears and headphones could impair the hearing ability. Higher setting that idle on the equalizer leads to higher signal voltages on the output for ear and headphones.
The power plug should be close to the radio, and easy to be approached that during the emergency, to disconnect the power from the radio, just unplug the power plug from the AC power slot.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnected device shall remain readily operable.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
The marking information is located at the bottom of apparatus.

CAUTION: Risk of explosion if battery is replaced
by an incorrect type.

The symbol indicates class II equipment.

The symbol indicates AC voltage.

The symbol indicates DC voltage.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of the electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to so.

Preparing for use (Fig. 1)

Open the remote control’s battery compartment, place two AAA batteries according to the diagram inside the compartment and close the battery compartment.
Connect the AC power cord to the AC IN socket at back of the radio and insert the plug into a wall socket (100-240 V ~ 50/60 Hz).
If this is the first time that you use your radio (or after a Factory reset), complete the radio’s initial setup by following on-display instructions of the radio’s Setup Wizard.
After completing the Setup Wizard, your radio is ready for use.

NOTES:

In order to use the internet functionality of the DDR-75BT, it must be connected to a network that has internet access during the Setup Wizard.
In order to control the radio using the UNDOK app, the radio must be connected to a network that has internet access.
Download and install the UNDOK app for your device by searching for “UNDOK” in Apple’s App Store or Android Google Play Store.

Listening to the radio (Fig. 2)

Press Power button to turn on the radio.
Press the Mode button, then press the Tuning up or Tuning down button (alternatively, the Folder up or Folder down button) to select the desired operating mode. Press the Select button to confirm your choice.
Press and hold the Info / Menu button to access the menu system of each mode. Highlight the menu item using the Tuning up or Tuning down button (alternatively, the Folder up or Folder down button). Press the Select button to select that item.
Pressing the Back button will go back to a higher level menu.
The Info button allows the display of information relating to the radio station or music file being played. Press the Info button to cycle through the different options.
Use the Volume control to adjust the sound level as needed.
Storing a preset using the menu: Press and hold the Select button. The display will show a “Save to Preset” menu. Press the Tuning up or Tuning down button (alternatively, the Folder up or Folder down button) to scroll through the preset list until you reach an unused preset or a preset that you wish to change. Press the Select button to store the preset. “Preset stored” will be shown on the display. Repeat this procedure as needed for the remaining presets.
Storing a preset 1-10 using the remote control:
To store the currently playing radio station as a preset, press and hold the required Preset button (1-10) on the remote control until the display shows “Preset stored”. The station will be stored using the chosen preset button.
Recalling a preset using the menu: Press the Select button to display the “Recall from Preset” menu. Press the Tuning up or Tuning down button (alternatively, the Folder up or Folder down button) to select the desired preset station.
Press the Select button.
Recalling a preset 1-10 using the remote control:
Momentarily press the required Preset button (1-10) on the remote control. Your radio will then connect to the station stored in the preset memory

Specifications

Power Requirements

Mains Power Supply| AC 100-240V, 50/60 Hz / 66W
Remote Control Battery| 2 x AAA
Frequency Coverage
FM| 87.5-108 MHz
DAB| 174.928-239.200 MHz
Connectivity
Wired Ethernet| 10 / 100M bits / sec via RJ-45 socket
WIFI| 802.11 b, g, n or a supported with WEP and WPA / WPA2 encryption. Compatible with 2.4GHz and 5GHz WIFI bands. The frequency and maximum transmitted power:WiFi:2412MHz ~ 2472MHz, EIRP = 16.63dBm5180MHz ~ 5240MHz & 5745MHz ~ 5825MHz, EIRP = 12.36dBmOperations in the 5.15-5.35 GHz band are restricted to indoor usage only.
Bluetooth

Bluetooth version| 5.0
Supported Bluetooth profiles| A2DP, AVRCP
Supported Bluetooth codecs| SBC and AAC
Transmitting Power| Power Class 2
Bluetooth range| approx. 10m (30feet)
The frequency and maximum transmitted power| 2402MHz ~ 2480MHz: 3.51dBm (Bluetooth EDR)
Circuit features
Loudspeaker| 2 x 3inch + 2 x 4inch
Output power| 10W x 2 + 25W (peak)
6W x 2 + 18W (continuous)
Headphone socket| 3.5mm diameter, stereo
Aux In socket| 3.5mm diameter, stereo
Line Out socket| 3.5mm diameter, stereo
Digital optical output socket| To slink
Aerial System| Wi-Fi antenna
DAB Telescopic aerial
FM Telescopic aerial
Operating temperature range| 0°C to +40°C

Sangram reserves the right to amend the specifications without notice.

RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

For full documentation on all of the DDR-75BT’s functionality, please visit the Web page below or scan the QR code to download the full manual.

https://www.sangean.com

WARNING: SHOCK HAZARD-DO NOT OPEN
AVIS: RISQUE DE CHOC ÉLECTRIQUE – NE PAS OUVRIR

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

3A87eP1100010