PXN-A7 Gear Shifter Game Controller User Manual

A7

SHIFTER

— User Manual —

Thank you for choosing and supporting PXN, please read this manual carefully before starting to enjoy your gaming experience.

01 Use with PXN Racing Wheel

Step 1  Use a Aviation Connector to RJ11 Connector Cable to connect the gear shifter to the shifter port on the steering wheel.
Step 2  When connected successfully, the red LED on the gear shifter will remain on, indicating the gear shifter is ready for use.
Step 3  Place the gear shifter horizontally in an appropriate position.
Step 4  Rotate and tighten the lower nut to secure the gear shifter in place.

a) Aviation Connector to RJ11 Cable

02 Use on PC

Step 1  Use the Aviation Connector to USB Cable to connect the gear shifter to the PC.
Step 2  When connected successfully, the red LED on the gear shifter will remain on, indicating the gear shifter is ready for use.

• In D-input category games, the game will recognize both the steering wheel and the gear shifter as separate devices. You can set up the gear shifter within the game settings.

Step 3  Place the gear shifter horizontally in an appropriate position.
Step 4  Rotate and tighten the lower nut to secure the gear shifter in place.

a) Aviation Connector to USB Cable

03 Supported Platforms

• PC: Windows 7/ 8/ 10/ 11
• PXN Racing Wheel: PXN-V9/ V10/ V99/ V12DDL/ V12DDS

04 Product Accessories

• Aviation Connector to USB Cable *1
• Aviation Connector to RJ11 Cable *1
• Aviation Connector to PS2 Cable *1

05 Product Specifications

Warning

• Avoid strong vibration, do not disassemble, modify or repair by yourself.
• Prevent water or other liquids from entering the product to avoid damage.
• Avoid storing in damp, high-temperature, or smoky environment.
• Please do not throw the product into fire to avoid explosion.
• Children should use this product under adult supervision.
• If you have any problems or suggestions about the product, please contact the seller or the after-services team.

    : PXNgame

: PXN Official
: PXN

Brand: PXN             Model: PXN-A7
Product Name: Shifter
Country of Origin: China
Manufacturer: Shenzhen PXN Electronics Technology Co., Ltd
Web: www.e-pxn.com     Support email: support@e-pxn.com
Manufacturer address: 1701-1706(01), Building 8, Zhongxi Xiangbinshan Garden,
Fenghuanggang Community, Xixiang Street, Baoan District, Shenzhen, China

EUREP GmbH
Unterlettenweg 1a
85051 Ingolstadt Germany
+49 841 8869 7744
eurep@eurep-gmbh.com

Prolinx Global LTD
27 Old Gloucester Street,
London, WC1N 3AX, UK
+0044 20 39661193
eu@eulinx.eu

“ ” is a registered trademark of ShenZhen PXN Electronics Technology Co., Ltd

FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

MADE IN CHINA

Documents / Resources

| PXN PXN-A7 Gear Shifter Game Controller [pdf] User Manual
PXN-A7 Gear Shifter Game Controller, PXN-A7, Gear Shifter Game Controller, Shifter Game Controller, Game Controller, Controller
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>