xtorm XG220x Power Bank Instruction Manual
- July 17, 2024
- Xtorm
Table of Contents
xtorm XG220x Power Bank
SPECIFICATIONS
When using multiple outputs
- When using 2 outputs 1/2 Share 15W
PRODUCT OVERVIEW
- Output USB-C 15W
- Output USB-A 15W
- Input USB-C 15W
- Power Button
- Led Power Indicator
CHARGING YOUR DEVICE
COMPATIBLE DEVICES
- Connect the USB-C end of the charging cable to the USB-C output of the Power Bank and the other end to the input of your device. The charging will start automatically.
- Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.
RECHARGING THE POWER BANK
- Connect the USB-C end of the charging cable to output 1 of the Power Bank and the USB end to a wall charger.
- For the fastest charging possible use a 15W USB-C charger. This will fully recharge the Power Bank within 8 hours.
LED POWER INDICATOR
- Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
- Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is fully charged.
IN THE BOX
- XG220x Power Bank
- USB-A to USB-C Cable
- Manual
- Connect the USB-C end of the charging cable to the USB-C output of the Power Bank and the other end to the input of your device. The charging will start automatically.
- B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.
RECHARGING THE POWER BANK
- Connect the USB-C end of the charging cable to output 1 of the Power Bank and the USB-C end to a wall charger.
- For the fastest charging possible use a 15W USB-C charger. This will fully recharge the Power Bank within 8 hours.
LED POWER INDICATOR
- Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
- Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is as good as fully charged.
RECYCLING
- When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached
device from overcharging.
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently divides power
between attached devices.
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This
protects the Xtorm charger and your device from short-circuit damage.
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and
meet all safety requirements.
HIGH EFFICIENCY
Our power products are built to power your device as efficiently as possible.
This ensures the least possible loss of energy during the charging process.
Warnings
Don’t drop, dissemble or attempt to repair the charger by yourself. Avoid
exposure to water or high humidity. Don’t expose to any heat source. Keep out
of reach of children. Don’t use in the presence of flammable gas. The warranty
will lapse in the event of improper use. Telco Accessories has tested the
product in a test environment. All statements/declarations made by Telco
Accessories about the (operation) of the product are based on the results
obtained from such tests. These results/statements/declarations cannot be
guaranteed, for example in cases of deviating or injudicious use and/or use in
a different environment.
EU DECLARATION OF CONFORMITY
(In accordance with EN ISO/IEC 17050-1)
HIGHER QUALITY = LOWER IMPACT
CUSTOMER SUPPORT
- support@tag.nl
- +31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten The Netherlands