T408 Veloce 3 Wheel Mobility Scooter User Manual

: June 12, 2024
: Veloce

T408 Veloce 3 Wheel Mobility Scooter

HELMETS SAVE LIVES!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

Correct Fitting:
Make sure your helmet covers your forehead.

Incorrect Fitting:
Forehead is exposed and vulnerable to serious injury.

Symbol WARNING

As with all mechanical components, the Veloce is subjected to wear and high stresses. Different materials and components may react to wear or fatigue in different ways. If the design life of a component has been exceeded, it may suddenly fail possibly causing injuries to the rider. Any form of crack, scratch or change of coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced. Do not ride in an abusive manner.

CAUTION

In this manual, the CAUTION sign indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.

Symbol WARNING

In this manual, the WARNING sign indicates a hazardous situation which, if not avoided, can cause death or serious injury.

INTRODUCTION

This manual is designed to give you the information you need for the safe operation and maintenance of your Veloce. Please read it thoroughly before riding your Veloce.

Symbol WARNING

Make sure you read this complete manual before riding your Veloce. Failure to do so, or failure to follow its guidelines could lead to serious injury or death.

The Veloce is a personal transporter. Our technology and production processes are developed with strict testing for each Veloce Electric Scooter. Operating the Veloce without following the contents of this manual may lead to damage to your Veloce, or bodily injury.

PACKAGE CONTENTS

Veloce Electric Scooter
Key
Charging Cable
Operation Manual
Rear View Mirrors

This item is not a toy. It is not recommended for riders under the age of 18. Your Veloce’s serial number is stamped respectively on steering column and battery column as shown below. Record the serial number for your reference.

BATTERY CARE

BATTERY MAINTENANCE

The SLA battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.

When charging the device, only use the enclosed Veloce charging cable assigned to this device.
Do not connect or attach the device or the battery to a power supply plug or directly to a car’s cigarette lighter.
Do not place the device or batteries near a fire, or into direct sunlight. Heating the device and/or the battery can cause additional heating, breaking, or ignition of the battery inside the device.
Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.

To preserve natural resources, please recycle or dispose of batteries properly. This product contains Lead Acid batteries. Local, state, or federal laws may prohibit disposal of Lead- acid batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

Symbol WARNING

Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death.

Do not use your device if the battery begins to emit odor, overheats, or begins to leak.
Do not touch any leaking materials or breathe fumes emitted.
Do not allow children and animals to touch the battery.
The battery contains dangerous substances, do not open the battery, or insert anything into the battery.
Do not attempt to charge the device if the battery has discharge or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.

BEFORE RIDING

Symbol WARNING

Any Veloce that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected.

RIDER OPERATION

It is important you fully understand all the elements of your Veloce. If these elements are not used correctly, you will not have full control of your Veloce. Before you ride fast, or outside of a controlled environment, lear the functions of the various mechanisms on your Veloce Scooter.

PRE-RIDE VELOCE CHECKLIST

Ensure that your Veloce Scooter is in proper working order each and every time you ride. If part of the Veloce does not function correctly, please contact your place of purchase.

Always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect your from serious injury, and in some cases, even death.
WARNING
Any scooter that does not work properly can cause you to lose control and fall. Do not ride a Veloce Scooter with a part that is damaged; replace the damaged part before riding.
The owner shall only use and operate the unit after full comprehension of all components and functions of the unit.
Check with your doctor if you have a medical condition that could affect your ability to use the Veloce Scooter.
Persons with a medical condition, heart condition, head, back, or neck ailments or prior surgeries to those areas of the body are not recommended to use the Veloce Scooter.
Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand, and perform all of the safety instructions, and to be able to assume the hazards inherent in unit use, should use the Veloce Scooter.
Ensure your tire pressure is at 30psi (210kpa) before riding.
Ensure that your battery is fully charged before riding your Veloce Scooter.
CAUTION
Only use the enclosed charging cable and charger to charge your Veloce Using any other unauthorized charger may damage your Veloce Scooter.
Make sure that there is no dust, debris or dirt inside the port.
Locate the charge cable and plug the male end into a grounded wall outlet.
Plug the female end in the scooter’s charge port.
The charging indicator light on your charger should change to RED, indicating that your device is now being charged.
When the RED indicator light on your charger turns to GREEN, then your device is fully charged.
A full charge may take up to 10 hours.
After fully charging your scooter, unplug the charge cable from the power outlet.
Lift the charge port flap back up and push in to secure it back into place.

SAFETY PRECAUTIONS

If the Veloce is not to be used for an extended period of time, you may need to recharge the battery every 2 months to maintain the battery life.
Ensure that the screws on the front and back tires are locked firmly before each ride.
Check to ensure the tires are not worn.
Check to ensure all connections are maintained on the Veloce.
Ensure the brake cables are well lubricated. It is suggested you lubricate brakes every 6 months.
Ensure the throttle moves smoothly. You should be able to tum it forward and back.
Make sure there are no frayed cables, loose connections, missing fasteners or axle/lug nuts.

CHECKING BRAKES

A cable connects the brake lever to your brakes. The lever causes the brake pads to apply pressure to the rotors on your wheels.

Pull the lever to ensure the brake moves freely and stops the Veloce Scooter. If the lever can be pulled flat to the handlebar, the brake is too loose.

When brakes are not applied, brake pads should be 1 – 2 mm from the rotor. If brake pads are too close to the rotor, the brakes are too tight. The brake pads should be in line with the rotor surface.

Adjust your brake lever to improve brake sensitivity. Brakes will wear down over time. If after you have adjusted brake sensitivity, you feel that the brakes are not performing well, you may need to have brake pads or rotors replaced.

The first rule in safe riding is to use common sense. A Veloce Scooter is vulnerable; it cannot protect you in a crash, against impact, or loss of control the way driving a car can. A Veloce Scooter can tip over sideways or pitch you over the front wheel. It moves faster than a typical scooter. It does not have bumpers or airbags as a car does.

This section is a guide of safe riding practices. Make sure you are using your Veloce Scooter properly.

CAUTION

Brake pads and rotors get very hot during use and could bum skin. The edges can also be very sharp and cut skin. Do not touch the brake pads or rotors directly after riding your Veloce Scooter.

Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws.

Challenger Mobility is not liable for tickets or violations given to riders who do not follow these regulations.

Always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
Ride with the traffic, not against it.
Ride defensively; expect the unexpected.
Give pedestrians the right-of-way.
Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
Slow down at all street intersections and look to the left and right before crossing.
Obey all traffic signals.
Always use proper hand signals for turning and stopping.
Give signals before stopping or turning and always return both hands to the handle bars before stopping or turning.
Watch for cars pulling out into traffic and for the sudden opening of car doors.
Avoid potholes, drainage grates or other road surface hazards.
Never hitch onto other vehicles.
Do not “stunt” ride or race in traffic.
WARNING
Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential mJury, do not apply sudden or excessive force to your brakes. Apply your brakes gradually and give yourself enough room to come to a complete stop safely.
Do not weave in and out of traffic or swerve from side to side.
A crash can put extraordinary stress on Veloce components, possibly causing them to fatigue prematurely.
Components suffering from stress fatigue can fail suddenly, causing loss of control, or serious injury.

CAUTION: RIDING IN WET WEATHER

Brakes do not work as well under wet conditions as they do when dry. It is recommended that you do not ride your Veloce Scooter in wet weather, as there are electronic components that may be damaged if exposed to water.

If you are riding your scooter in low-visibility conditions, ensure your headlight is turned on, and that you are wearing bright reflective clothing.

Think about safety when you ride. You can prevent many accidents if you think about safety. Below is a helpful checklist for Veloce riders.

SAFETY CHECKLIST

Check your scooter before every ride, making sure brakes are operating effectively and everything is in good working condition.
Always keep both hands firmly on the handlebars.
Do not ride “double” with more than one adult rider on the seat.
Avoid riding in large groups, as this can force you to rider too close to other riders, making it difficult to see other vehicles and road hazards.
Do not rider above your skill level. Ensure you have had enough practice with all functions and features of your Veloce Scooter.
With increased speed comes increased risk. If you are moving at a higher speed, small bumps can turn into large impacts, leading to a higher risk of injury if an accident occurs.
WARNING
When you ride in low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. In addition to keeping your headlight on, wear bright, reflective clothing when riding in poor lighting conditions.
Do not rider with loose objects attached to the handlebars or other parts of the scooter.
Do not ride while intoxicated or while taking medications which can make you drowsy.
When approaching a descent, decrease your speed.
Do not abuse your Veloce Scooter

Always look ahead to avoid and anticipate any upcoming obstacles. The distance of any upcoming obstacles will vary according to your speed.

WARNING

There may be additional risk to injury if you use your scooter incorrectly.

This includes, but is not limited to:

Jumping your scooter
Riding over debris or obstacles
Performing stunts
Riding in off-road terrain
Racing other riders
Riding in unusual manner

The aforementioned examples add stress to each part of your scooter and can lead to long term damage of the device. Damage to your scooter can lead to an accident or increase your risk of injury. To decrease your risk of injury, use your scooter correctly.

Use caution when you encounter road obstacles. If you are going fast, even a small obstacle can create a significant impact to both you and your scooter. If you are unsure about your ability to safely ride over an obstacle, it is best to either ride around it, or stop your scooter, dismount, and walk your scooter around the obstacle. The natural tendency of riders is to move where they are looking.

Avoid focusing on obstacles, even if you are trying to avoid them. Instead, focus on the part of the road where you wantto go.

OPERATING CONDITIONS

FAILURE TO FOLLOW ANY OF 11E FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.

OPERATING YOUR DEVICE

Make sure the device is fully charged before the first initial use.
Before turning on your scooter, sit on it like a normal bike to get comfortable with the device before using it with the motor.
The scooter is equipped with a built-in 1000 Watt Motor which allows you to accelerate (up to 15.5 mph) and decelerate.
To turn, use the handlebar to turn in the direction you wish to turn. Prepare to brace yourself if you encounter bumps or uneven surfaces, then dismount and roll your scooter to a safe operating surface.

WEIGHT AND SPEED LIMITATIONS

Speed and weight limits are set for your own safety. Please do not exceed the limits listed here in the manual.

Maximum Weight: 300 lbs
Minimum Weight: 44 lbs
Maximum Speed: Up to 15.5 mph

WARNING

Overweight exertion on product may increase possibility of injury or product damage.

OPERA TING RANGE

The scooter can travel a distance up to 28 miles on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your device.

Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly.
Weight: A lighter user will have further range than a heavier user.
Ambient temperature: Please ride and store the device under recommended temperatures, which will increase driving distance; battery life, and overall performance of your device.
Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling and frequent acceleration or deceleration will decrease overall distance.

WARNING

Any scooter that does not work properly can cause you to lose control and fa ll. Inspect the entire scooter thoroughly before every ride, and do not ride it until any problems have been corrected.

WARNING

Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury.

CARE & MAINTENANCE

Do not expose the device to liquid, moisture, or humidity to avoid damageto the product’s internal circuitry.
Do not use abrasive cleaning solvents to clean the device.
Do not expose the device to extremely high or low temperatures as this wil l shorten the life of the electronic device, destroy the battery, and/or distort certain plastic parts.
Do not dispose of the device in fire as it may explode or combust.
Do not expose the device to contact with sharp objects as this wi ll cause scratches and damage.
Do not let the device fall from high places, as doing so may damagethe internal circuitry.
Do not attempt to disassemble the device.
Use only the charger provided for your Veloce Scooter.

WARNING

Avoid using water or other liquids for cleaning. If water or other liquids enter the scooter, it will cause permanent damage to the internal components.

VELOCE DIAGRAM

Veloce Diagram

FEATURES/PARTS

Rear-View Mirror
Throttle
Storage Compartment
Seat
Shock
Front Brake Lever
Turn Signal
Charge Port
Display
Headlight
Tire

HANDLEBAR DIAGRAM

Handlebar Diagram

Rear Brake
Parking Brake
Low Beam/High Beam Switch
Meter Display
Hazard/Kill Switch
Front Brake
Tum Signal Switch
Horn
Ignition
Light Switch
Reverse/Neutral/Forward
Speed Adjustment Button
Throttle

SPECIFICATIONS

Model: Veloce
Load: 300Ibs
Max Speed: Up to 15.5 mph(25 km/h)
Max Distance Range: Up to 28 miles8
Max Incline Angle: 20· degrees
Min. Clearance: 5 Inches (127cm)
Brake Type: Front Disk Brake and Rear Drum Brake
Shock Absorption: Front Frame Suspension Fork, Rear Two Heavy-Duty Shock Absorbers

Hand Height: 37 Inches (93.98cm)
Tire Size: 3 Inches width (7 .62cm) 90% Span ratio
10 Inches diameter (25 4cm)

Motor: 1000 W
Charge Time: Up to 8 hours
Battery Type: Li-ion
Battery Voltage: 60V
Battery Capacity: 20AH
Power Requirement: AC 100-240V, 50-60Hz

NOTE: Max speed and max distance may vary depending on, but not limited to: user load, terrain of road, operation temperature, driving habits and environmental temperatures.

IGNITION

TURNING ON SCOOTER
Turn key clockwise to “ST ART” to turn on scooter engine.
TURNING OFF SCOOTER
To tum scooter off, turn the key to “OFF.”
OPEN SEAT
Tum key to “OPEN” to unlock seat cover and open at back of unit.
LOCK
Push key in and tum key to “LOCK” to lock scooter.

CONTROLS & DISPLAY

Controls & Display

SPEEDOMETER
Displays current speed in mph/kph – depending on your head unit.
ODOMETER
BATTERY LIFE INDICATOR
Displays your remaining battery life.
TURN SIGNALS, DRIVE-REVERSE, HIGH BEAMS

SEAT COMPARTMENT

Your Veloce comes with a seat compartment for extra storage and to house your battery.

To access the seat compartment simply use the key – at the back of the scooter, turn it to open, and lift up the seat. Beneath the storage area you will find:

Main Circuit Breaker
Rechargeable Battery Compartment

ATTACHING REAR-VIEW MIRRORS

Remove the rear-view mirrors from the box. (if your Veloce is not being delivered fully assembled)
Attach the rear-view mirrors by screwing the mirrors (with bolt, lock washer, and alien wrench) into the grommets.

CHARGING YOUR RIDER

Locate the charging port underneath the front end of the seat.
Push the charging port flap to reveal the charging port.

VELOCE OPERATING MANUAL

ADJUSTABLE SEAT

Adjustable Seat

UNDER SEAT STORAGE

Under Seat Storage

RIDING YOUR VELOCE

After reviewing the pre-ride checklist, follow the steps below to begin rid ing your Rider.

Ensure parking brake is off. The Parking Brake is located on the lefthand brake. The tab holds tension in the brake lines to keep the unit stationary when not in use.
Activate your parking brake by pressing this tab up while squeezing the left- hand brake. The tab will click inwards.
To deactivate your parking brake, squeeze the left-hand brake to release the Parking Brake tab.
Insert the key into the ignition and turn clockwise to the “ON” position to turn on your Rider.
The Meter Display will tum on.
Set your ma:>5peed by the three-position speed – switch.
“I” – maxspeed: 6mph.
“II” – maxspeed: 12 mph.
“Ill” – maxspeed: 15.5 mph.
Turn the throttle toward yourself slowly. The Veloce will begin to move forward.
When the Veloce begins moving forward, put your feet in front of you on the FOOT REST. Your speed will be determined by the turn of the throttle and your speed level setting.
To stop your VELOCE, release the throttle and squeeze to apply your Front & Rear Brakes with both hands slowly until you reach a complete stop.

*Do not attempt to stop suddenly as this may lead to injury or damage to your brake discs.

Symbol WARNING

Proper use of your brake is vital to ensure safe, efficient stopping. To avoid misuse and potential injury, do not apply sudden or excessive force to your brake. Apply the brake gradually and give yourself enough room to come to a complete stop safely.

Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lead Acid batteries.

Lead Acid batteries are considered to be hazardous materials.
Please follow all local, state and federal laws in regards to recycling, handling and disposing of Li-ion batteries.

WARRANTY

For warranty information, please visit topmobility.com

PERFORMANCE
The Veloce is designed to be easily controlled, providing a safe, stable form of travel. The built-in rechargeable SLA battery allows you to power up and go. The ultra-bright LED headlight and brake lights provide safety as you explore your surroundings.

Please note: The Veloce requires 8 hours of charging for a full charge.

DESIGN
The Veloce is a modern electric scooter equipped with a powerful motor and responsive brakes, allowing you to travel up to 28 miles and up to 15.5 miles per hour.

www.challengermobility.com

Veloce Logo