ICP DAS UA-2841M Advanced IIoT Communication User Guide
- July 16, 2024
- ICP DAS
Table of Contents
ICP DAS UA-2841M Advanced IIoT Communication
Packing List
The shipping package includes this document and the following items:
Technical Resources
How to search for drivers, manuals and spec information on ICP DAS website.
For Mobile Web
For Desktop Web
Preparations for Devices
Prepare one UA-2800 (Ex: UA-2841M), and the following:
- PC/NB: Can connect to the network and set the network
- Ethernet Hub or Switch (Ex: NS-205A)
- Power Supply: +12 ~ +48 VDC (Ex: MDR-60-24)
Hardware Connection
Connect the UA-2800 with the LAN1 RJ-45 port to an Ethernet hub/switch and PC. You can also directly link the UA to PC with an Ethernet cable.
After power is connected, please【wait 1 minute】for UA startup procedure. When the “RUN” “PWR” lights start flashing, it represents the boot is complete.
Network Connection
Factory Default Settings of UA-2800|
---|---
| IP| LAN1: 192.168.255.1
LAN2: 10.0.0.1
| Assign UA- 2800 a new|
Netmask| 255.255.0.0|
Network| IP setting|
| according to your case.|
Gateway| LAN1: 192.168.1.1
LAN2: 10.168.1.1
|
| Username| root| After login,|
Web UI| change the|
Account| Password| root| username /|
| password.|
Change PC’s IP setting to be in the same network with UA.
Ex: (Write down the PC original IP settings before modify.)
| IP | 192.168.255.10 |
|---|---|
| Subnet mask | 255.255.0.0 |
| Gateway address | 192.168.1.1 |
Make sure the PC and UA is connecting through Ethernet.
And then open a PC side browser (Ex: Chrome, IE…). Type http://192.168.255.1
in the URL address. Use default Web UI username/password root/root to login
the system
Change the default Username/Password in the 【System Setting】>【Account Setting】 to use other functions.
Click 【System Setting】>【Time Setting】, check if the UA time is correct. If
not, modify or set Time Synchronization.
Click【System Setting】>【Network Setting】>【Network Setting(LAN1)】to change the
IP setting by user network.
Save the IP setting, restore the PC original IP settings, and type the new IP in the browser as step-3 to login the Web UI of UA-2800. And then configure user’s UA project.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>