xpr XS Series Mifare Reader and Keypad Installation Guide
- July 16, 2024
- xpr
Table of Contents
- xpr XS Series Mifare Reader and Keypad
- Product Specifications
- Product Usage Instructions
- Frequently Asked Questions
- SPECIFICATIONS
- MOUNTING
- FERRITE CORE MOUNTING
- TERMINAL BLOCKS AND DIPSWITCH
- TERMINALS
- CABLING
- SIGNALISATION
- DEFAULT CONFIGURATIONS
- ACCESSORIES (OPTIONAL)/ ACCESSOIRES (EN OPTION)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
xpr XS Series Mifare Reader and Keypad
Product Specifications
- Product Name: Xsmart Range Mifare Reader & Keypad
- Model Numbers:
- XS-K-MF-W
- XS-K-MF-W-X
- XS-K-MF-RS
- XS-K-MF-RS-X
- XS-MF-W
- XS-MF-W-X
- XS-MF-RS
- XS-MF-RS-X
- Mounting: Wall mounting with rubber gasket
- Dimensions: 5 mm thickness, various screw sizes for mounting
- Communication: Micro USB, RS-485 bus configuration
- Cable Type: Multiconductor cable with shielding
- LED Indicators: OFFLINE status indicated by a rapidly blinking red LED
Product Usage Instructions
Mounting Instructions:
- Place the device on the desired location on the wall.
- Use the provided rubber gasket to ensure a secure fit.
- Secure the device using the specified screws and follow the vfront/back indications.
Connection Setup:
Connect the device using the Micro USB port and configure the RS-485 bus according to the provided specifications.
Cable Installation:
Use the recommended multiconductor cable with shielding for proper communication. Ensure correct wiring and distances for optimal performance.
Frequently Asked Questions
Q: What does the rapidly blinking red LED indicate?
A: The red LED blinking rapidly indicates that the device is in an OFFLINE status, meaning it has lost communication with the controller.
Q: How should I address an OFFLINE status on the device?
A: To address an OFFLINE status, check the communication connections, reset the device if necessary, and ensure proper configuration settings.
Q: Can I use a different type of cable for installation?
A: It is recommended to use the specified multiconductor cable with shielding to maintain proper communication and performance of the device.
Xsmart Range: Mifare Reader & Keypad with Mifare
SPECIFICATIONS
MOUNTING
MOUNTING WITH MT-SPACER
FERRITE CORE MOUNTING
TERMINAL BLOCKS AND DIPSWITCH
TERMINALS
CABLING
| CABLING | WS4 Configuration: | EWS Configuration: |
|---|---|---|
| Max length | **** |
80 m
| ****
150 m
CABLING
| ****
Multiconductor cable 2 twisted pair with shielding
| ****
Untwisted, shielded, 0.22 mm2 min. For longer distance above 20 m use larger diameter.
.
SIGNALISATION
SIGNALISATION| ****
DESCRIPTION
| ****
XS-MF-RS-X & XS-MF-RS XS-K-MF-RS-X & XS-K-MF-RS
---|---|---
Reader OFF-LIne| Reader lost communication with controller
| Red LED Blinks fast
DEFAULT CONFIGURATIONS
-
Online solution: XS-MF-W & XS-K-MF-W factory setting is to read CSN and Wiegand 34 bit. XS-MF-W-X & XS-K-MF-W-X factory setting is to read
Xsecure credentials and Wiegand 34 bit. In order to change the default settings, please use the PROS CS software. -
Web server solution: XS-MF-RS & XS-K-MF-RS factory setting is to read CSN. XS-MF-RS-X & XS-K-MF-RS-X factory setting is to read Xsecure credentials.
In order to get the configuration software (Product Manager) and change the default settings, please contact us at: info@xprgroup.com
ACCESSORIES (OPTIONAL)/ ACCESSOIRES (EN OPTION)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>