DMM 5000 Series Digital Portable Multimeter Installation Guide
- October 27, 2023
- DMM
Table of Contents
DMM 5000 Series Digital Portable Multimeter
COMPUTER MINIMUM CONFIGURATION
- Pentium IV & Higher Processor
- 2 GB RAM
- 50MB Hard drive space
- CD-ROM Drive
- Window 7 and above
- USB Port (USB2.0): 1 USB Port Per Device
- 800 x 600 or Higher Monitor Resolution
- Window Supported Printer, if the printout is required
- NET Framework 4.0 or higher pre-installed
SETUP PROCEDURE
- During Installation, administrator privileges are required for logged-in users.
- Insert Multimeter Software CD in CD-ROM
- Open CD-ROM
- Open “DMM Datalogger” Folder
- Run DMM Datalogger Setup.exe
Stage 1:
Installation of Multimeter Software
Click on Next.
Now select the checkbox to create a desktop shortcut if required and click on
next.
Click on Install.
Stage 2:
Installation of Device Driver (FTDI CDM Driver)
- The setup will now ask to install a USB Driver (FTDI CDM Driver).
- If your system has FTDI CDM Driver installed then you can skip this stage by clicking on “Cancel”.
- Click on Extract.
- Click on Next.
- Click on I accept this agreement & then Click on Next. After clicking on Next button Device Driver installation start.
- Click on Finish to complete Device Driver Installation.
- Click on Finish to finish the installation of Complete Software. Now you can use the Software for data logging and parameter configuration. For understanding Software features, refer to the DMM Datalogger, Software Manual.
Read User Manual Online (PDF format)
Loading......