BOTESI F9-T26 Bluetooth Wireless Headset Instruction Manual
- July 16, 2024
- Botesi
Table of Contents
WIRELESS HEADSET
BLUETOOTH
Version 5.4
Instruction Manual
Please read this manual carefully before use the device.
Product Usage Introduction
- Do not attempt to disassemble or replace any part of the product except for those operations specifically indicated in the instruction manual.
- Do not immerse the product in water or any other liquid, the product is not designed to be waterproof.
- If any liguids accidentally enters the product, disconnect and remove the product immediately.
- To avoid electric shock, make sure there is no water on your hands when installing or uninstalling the product.
- Do not place this product near a heat source or expose it directly to an ignition source.
- Do not place this product in an environment with strong electromagnetic force, otherwise it may cause the product to malfunction. In the above cases, it is necessary to disconnect and remove this product.
Packing List
| Headset X 2 | Charging case X 1 |
|---|---|
| Manual paper X 1 | Charging line X 1 |
Headset Specifications
Bluetooth Version: V5.4
Transmission distance: 10-15 metres
Battery capacity: 30 mAh
Usage time: about 5 hours
Charging time: about 1.5 hours
Rated input: 5V 500mA
Charging case Specifications
Battery capacity: 350mAh
Charging time: 1-1.5 hours
Rated input: 5V ===500mA
Jsage time: 15 hours
(Al technical specifications)
Charging the case: information depends on actual Use Type-C cable to connect
the charging case to the 5V power adapter. This device does not support fast
charging head.
(Warm tip: If the charging bay indicator light flashes green, charge the
charging bay in time.)
Description of LED Indicators
Charging case led indicator
The headset is not fully charged: the green light is on continuously
Headset fully charged: the indicator light is off Charging the charging case:
white light flashes Charging case fully charged: white light is on Low battery
level in the charging case: green light flashes
Headset led indicator
Power on: white and green LEDs flash alternately Power off: white LED flashes
three times Bluetooth pairing status: white and green LEDs flash alternately
Successful pairing with headset: LED off
Product Operating Instructions
Power on
Option 1: Remove the headset from the charging case, the headset will turn on
automatically.
Option 2: When the headset is off, press and hold the touch area of the
headset for 3 seconds, the headset will turn on.
Power off
Option 1. Put the headset back into the charging case, the headset will switch
off.
Option 2: Long press the touch area of the headset for 5 seconds, the headset
will switch off.
Pairings
Step 1: Remove the headset from the charging case, the headset will
automatically switch on and once switched on, it will automatically execute
the command.
Step 2: Open the Bluetooth list on your smart device, find the device model
(showed in the package cover) and press the connect button (supports monaural
sound).
Touch button control
A: Music playback mode
Left/right headset control
Previous song: double-click the function key on the left headset (L)
Next song: double-click the right headset function key (R)
Volume +: triple press the function button on the right headset (R)
Volume – triple press the function button on the left headset (L)
Pause/playback: press the function button on the headset once
B: Handsfree phone mode
Left/right headset control (incoming call)
Answer: press any function key on the headset
Reject: press and hold any headset key for 2 seconds
Hang up: press any function key on the headset
C: Activate voice assistant (smart devices support voice assistant)
Left/Right Headset Operation
Activation: Long press any headset function key for 1.5 seconds (except under
call status)
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.