PHILIPS 5792572 LED Tube Instant Fit Installation Guide
- June 5, 2024
- Philips
Table of Contents
5792572 LED Tube Instant Fit
Installation Guide
5792572 LED Tube Instant Fit
Please take the time to read this installation guide. The guide contains important information and notes regarding the installation and operation.
IMPORTANT!
- Always switch off the power supply before commencing work!
- Only to apply in dry indoor usage and environments, outdoor applications require an IP-rated fixture.
- Do not change the fixture or any components of the LEDtube to ensure safety.
- Philips LEDtube is designed to fit in standard IEC compliant G5 bi-pin lamp holders.
- Philips LEDtube should be installed by qualified professionals in accordance with relevant electrical codes.
- Any constructive change of the luminaire in case of applying retrofit LED lamps shall not be permitted.
- For applications that contain emergency and or explosive proof luminaires please consult your local distributor for more information
- Retrofit to existing T5 lamps on HF ballast installations in the open luminaire.
- This lamp is not suitable to be used in emergency luminaires designed for the double-capped fluorescent lamp(s)
- Toute operation de remplacement dun Tube fluorescent T5 par un LEDtube dolt etre effectuee par un installateur electricien professionnel en respectant les prescriptions du present Guide d’Installation
- Philips LEDtube debe ser instalado por un electricista profesional deacuerdo con los c6digos electricos relevantes de iluminaci6n.
DISCLAIMER: Signify disclaims liability for any direct, indirect, or incidental damages in case of installation performed either not according to this guide or not performed by a professional electrician. Note: Philips LEDtube InstantFit is compatible with most electronic ballasts in the market. For best compatibility results; please visit http://www.lighting.philips.com/main/products/led-tube for further information.
Packaging list
Philips LEDtube
| SYMBOL | MEANING |
|---|---|
| Lamp suitable for high-frequency operation | |
| Lamp not suitable for emergency operation | |
| Lamp to be used in dry conditions or in a luminaire that provides protection |
Warning
- No modifications to the luminaire which the LED lamp is to be used with are to be made.
- This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application, the manufacturer of this lamp should be consulted.
- This lamp is designed for general lighting service (excluding e.g. explosive atmospheres).
© 2019 Signify Holding
Signify All rights reserved. Reproduction in whole or in part is prohibited
without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is
believed to be accurate and reliable, and may be changed without notice. No
liability will be accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent or
other industrial or intellectual property rights.
www.philips.com/lighting
06/2019
Documents / Resources
|
PHILIPS 5792572 LED Tube Instant
Fit
[pdf] Installation Guide
5792572, LED Tube Instant Fit, 5792572 LED Tube Instant Fit
---|---
|
PHILIPS 5792572 LED Tube Instant
Fit
[pdf] Installation Guide
5792572, LED Tube Instant Fit, 5792572 LED Tube Instant Fit, Tube Instant Fit
|
PHILIPS 5792572 LED Tube Instant
Fit
[pdf] Installation Guide
5792572 LED Tube Instant Fit, 5792572, LED Tube Instant Fit, Tube Instant Fit,
Instant Fit
|
PHILIPS 5792572 LED Tube Instant
Fit
[pdf] Installation Guide
5792572, LED Tube Instant Fit, 5792572 LED Tube Instant Fit, Tube Instant Fit,
Instant Fit