Audi QLS-6888 Children Electric Car Instruction Manual
- June 9, 2024
- Audi
Table of Contents
- Audi QLS-6888 Children Electric Car
- Audi RS e-tron GT Ride-on
- ASSEMBLY INSTRUCTION
- Function
- Remote Control Function and Instructions
- Battery Operating Specifications
- Install the front wheels
- Install the rear wheels
- Install the steering wheel
- Install the windshield
- Install the seat
- Install the rear view mirrors
- Maintenance and Service
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Audi QLS-6888 Children Electric Car
Audi RS e-tron GT Ride-on
- Children electric car
- Installation and Operation Instructions
- Stimulation car model
- System driven by remote control
- Forward, backward and steering operations by remote control
- Forward and backward operations by manual shift
- Steering wheel’s music function
- Techniques of volume regulation and MP3 amplification function
- Battery power display
*Max weight: 25 kg.
Officially Licensed by AUDI AG
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTION
PARTS
Product Specifications
- Battery: 6V: 6V4.5AH 6V7AH
- 12V: 12V4.5AH/12V7AH
- Drive Motor: 6V: 6V390*1(18000RPM)
- 12V: 12V390*2(18000RPM)
- Steering Motor: 6V: 6V380*1(5600RPM)
- 12V: 12V380*1(5600RPM)
- Suitable age: 37-95months
- Maximum weight: 25kg
- Car Size: 1035841cm
- Speed: 3-5km/h
- Hours of Use: Using 1-2 hours after Charging 8-10 hours
- Charger: Input: 100V-240V 50/60HZ
- Output: 6V: 6V0.5A / 6V0.8A, 12V: 12V0.5A / 12V1A
- Remote Control Battery : AAA1.5V*2(not provided)
Function
Function indication
- CD Multi-Media
- ® The voltage display
- ® Dashboard
- @ Power switch
- @ Light switch
- ® Speed switch
- Forward
- Stop
- Back
- @USB
- @TF
- ®) MP3
Remote Control Function and Instructions
- Never switch forward and backward operations in the moving, or the gear box and motor will be damaged.
- Use the remote control with battery.
- Only the baby’s legal guardian can use the remote control.
- The product is operated mainly by remote control.
Instructions
Hold down Forward key & Back key for 3 seconds start match code, The first LED
flicker; Turn on the car body power now The first LED lit up,
Match code Success
Press S key set up speed , 1 led lit up is low speed 2 leds lit up is medium
speed 3 leds lit up is high speed,
Back a car is only low speed
Press P key hold the brake, All LED flicker Remoter 10 seconds not run will be
standby, Press any key wake up.
Battery Operating Specifications
- Never mix new and old batteries, or different kinds of batteries.
- Never mistake positive and negative electrode of battery, or short circuit will happen.
- Non-rechargeable batteries are not to be recharged.
- Install batteries in a right polarity.
- Only adults can recharge or change batteries.
- Never make power port’s short circuit happen.
- Recharge the battery only when it is taken out of the toy car.
- Take exhausted battery out of the toy car and keep it out of Children’s reach.
- Remove battery screws with a screwdriver, open battery cap as the arrow signals, and in the 2.4G remote control model install two AAA 1.5V batteries in a right polarity.
Install the front wheels
First, remove the nut and a gasket from the front axle, then install the wheel, gasket and nut onto the front axle in turn, tighten the nut with a wrench, and finally install the wheel cover on the wheel. Install the front wheel on the other side in the same way.
Install the rear wheels
First, remove the nut and gasket from the rear axle, then install the wheel, gasket and nut onto the rear axle in turn, tighten the nut with a wrench, and finally install the wheel cover on the wheel. Install the rear wheel on the other side in the same way.
Install the steering wheel
First connect the steering wheel cable to the instrument panel, then plug the cable into the cable hole, and finally align the steering wheel with the connector.
Install the windshield
Align the windshield to the body position, and fix the clip to the hole position.
Connect the power cord
Connect the power cord to the battery. Then turn on the power to check the circuits.
Install the seat
First remove the two screws at the front of the seat position, then align the seat to the position on the body, and lock it with screws.
Install the rear view mirrors
Distinguish left mirror from the right one. Then insert the mirrors into the hole site on the door.
WARNING
The toy is to be assembled by an adult. In unassembled state contain
potentially hazardous sharp points, sharp edges and small part, so please keep
out of baby’s reach. Not to be used in traffic. Only adults can install parts
and adjust the car, and keep moving parts out of children’s reach. Children
under 36 months cannot use the toy car as it has many small parts. Children
must take the seat belt when using the car, and keep the car out of the fire.
Children can use the product only in the company of adults, and the adult
cannot leave during the process. Never let Children stand or play onto the
pedal or in the car. Only adults can complete storage battery charging, and
must charge the product before its first use. Keep such package materials as
plastic bags out of children, or they will suffocate or kill children. Never
use parts provided by non-manufacturers. Never let children play with the
charger. The number of connected power by the product can never be over the
recommended number.
Notice of use
Never use the product in such dangerous zones as street, road, slope or
drain. Never change the circuit and additional electric devices. Never use
remote control in rainy days or in the water, never pour water or other liquid
into the car, keep the product out of the fire, otherwise the car will be
damaged. Only one child can use the product, and its weight cannot exceed
25KGS. Turn off the power when not in use and remove battery connector when
not using it for a long time. As the product has battery charger, check
whether wire plug shell and other parts are damaged or not, and fix those
damaged parts. The product must be assembled by the adult! Before assembling,
screws and pins are dangerous sharp points.
Charging notice
Charge storage battery less than 10 hours, or the storage battery will be
damaged forever. In charging, put DC Plug into the power socket, put charger
into power plug; never use the product during charging it. The product can be
used for one hour, and the charging time is 8-10 hours, exceeding no more than
18 hours. It is common for charger and storage battery to have not become
heated(temperature under 60 degrees)in charging. Never use the connector with
the water, or short circuit will happen. Use the product’s own charger, or
cause charger and storage battery to be damaged or short circuit. Charge the
product when not using it for a long time.
Charging steps are as follows
Step 1: Find the charge hole behind the cover in the left front fender.
Step 2: Put the charger plug into the plug hole.
Step 3: Connect the charger to the power socket.
Relevant materials: PP plastics, k-carrageenan, generator, battery and iron castings.
Trouble Clearing
Maintenance and Service
Before use children’s parents should check whether charge’ s wiring, plug, shell and other parts are damaged, and fix those damaged parts. After using the product for a time, parents should lubricate iron castings with lube, or those castings will get rusted; they should keep the product out of fire and lay it flat in dark places; they should put the product inside the house or cover it with one water-proof cloth in wet whether. Parents should keep the product out of such hot objects as stove and heater, or its plastic parts may be thawed; they should keep the product out of combustible objects in charging, or the fire may happen. Parents should clean car surface with one dry cloth, or clean plastic parts with nonwaxy furniture polish; they shouldn’t clean plastic parts with chemical solutions or clean the car with water; children cannot drive the car in wet or rainy weather, or the car’s generator, circuit system and battery will be damaged. when not using or laying the product, parents should cut off car power, keeping all the switches into “STOP” or “OFF” model. Parents mustn’t use the fuse which doesn’t conform with the agreed specifications. Parents should’ t change product structure and circuit system, and should have the product checked and fixed by professionals or under the guidance of professionals.
Officially Licensed by AUDI AG
Licensee: Penghu Qureshi Baby Carrier Co., Ltd.
(Address:No.1698 Dandong Road Xinyang Town, Penghu Jiaxing, hewing Province,
China).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>