Zhou Botesi M10 Wireless Headset User Manual
- June 17, 2024
- Zhou Botesi
Table of Contents
WIRELESS HEADSET
Operating instruction
M10
Product parameters are laboratory test data, the specific data is subject to the use of data.
Product diagram
Headset Configuration
Predict medel: M10
Running: time: abaat at boars
Operation mode: touch control
Effective distance: 21100
Vorsiven: 5.3
Coll time: appniaimarely, 4 boars
Charging time aabeat 1 fear
Horn: copper ring 8mm
Packing list
- charging box *1
- Left and right earphones #1
- Large ear cap *2
- Product Manual *1
- Charging cable *1
Charging bin contiguration parameters
Horn power:5mW
Charsing time: about 1 hours
Input voltage: 5V/500mAh
Wearing a way
Open the cover of the charging bin, take out the earphone of the right ear, gently put the speaker end of the earphone inte the ear canal of the right ear, and then gently sway the earphone nat to shake.
Mode of operation
- The beot
- Open the charging chamber, take out the earphone, start the machine automaticatly, and the earphone breathing light flashes
- When the headset is off, touch the touch pad af the headset for 3 seconds to start the headset
- To turn it off
- Put the earphone beek into the charging bin and close the cover. The earphone will be turned otro and charied
- When the headset is on, touch the touch pad of the headset for 3 seconds Lo turn it off
Pairs of cars connected
- Open the cover of the charging compartment, take out the earphone and start it automatically Breath light flashing, go into automatic platoon mode, one of them If the eadphone indicator 1s off or blinking slowty, the team is successtully formed.
- Open the device wireless list and search for ” TWS”
- Click “TWS” to connect. If the connection fails, put the earphone back into the charging bin and cover it,and then repeat the above steps.
- When both ears Teave the nem connection distance with the device at the same time, the headset will enter the wireless headset connection state. Ht the connection is not suceesstul within S minutes,the headset will automatically shut down
- After the headset is turned on and before the mobile phone is connected, three clicks on either side of both ears will automatically switch between Chinese and English languages.
Meter the heaiser is tarmedanetid before the mab nhice os canner ter themes
ies or edther silent both ears wil) cutemitiral ly sxiteh between Cluitmess
and Enel st: larauiges!
After the device is cormoacted for the first time, the headset will
automatically conneet ta the lass pedir device when it is restarted nest time
Binaural touch operation
Earphone charging: Put the earphone into the
charging box to automatically charge, close charging cover, charging indicator
light red light, red light off after full
Charging box low power : The single digit of the nixie tube flashes
Charging box charging: The single digit of the digital tube flashes, and
it stops when it is full of 100
F&Q
1. Q: How come only one earphone has sound?
A: Put the two earphones beck into the charging bin at the same time, close the cover to charge, and then take them out to see whether the dual-car mode is restored. If the fault is not rectified, restore the fault to factory Settings.
2. Q: The phone can’t connect to the headset?
A: Delete the paired M0 on the mobile phone, and then make the paired connection.
3. Q: How can I listen to music/talk without sound?
A: Android phones have a setting icon on the right side of the phone onnection record. Click enter to select two audioDeselect and then re~select. Enter audio Call mode in Setting General Accessibility, and select Automatic, if it is automatic, then other options, and then change to automatic, if not restored, Delete the pairing record retry attempt.
4. Q: Why is there a stutter/stutter?
A: If you use headphones, there are a lot of Wi-Fi devices, 46 signals, high power appliances and so onInterference, stuttering and discontinuous conditions may occur, and the connection can be restored by changing the environment or re-pairing.
Matters needing attention
- Please use a charger with safety certification from a formal source for charging.
- Adjust the volume of headphones to avoid damage to hearing.
- the correct use of the product to avoid falling from high or heavy extrusion.
- Children should be accompanied by adults to avoid accidental ingestion.
- Stay away from extreme environments such as high temperature or humidity
- Do not disassemble the product.
Special announcement
This wre with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired opration.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipm ent has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or televi- sion
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that te
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.