WatchGuard AP230W Indoor Access Point User Guide

July 16, 2024
Watchguard

WatchGuard AP230W Indoor Access Point

Specifications:

  • Product Name: AP230W Wireless Access Point
  • Power Input: 54VDC
  • Power Options: WG8599 (US), WG8600 (EU), WG8601 (UK), WG8602 (AUS)
  • LAN Ports: Ethernet LAN Port, PoE Out
  • Radio Frequencies: 2412 – 2472 MHz, 5180 – 5240 MHz, 5260 – 5320 MHz, 5500 – 5700 MHz
  • Max Power: 19.77 dBm, 22.81 dBm, 22.83 dBm, 26.34 dBm

Product Usage Instructions

1. Activate:

Visit watchguard.com/activate to activate your device.

2. Install:

Mount the device using the provided bracket and secure it with the bracket screw hole.

3. Connect:

Connect the device to a PoE+ network using LAN/Uplink 802.3at (54VDC, 0.6A) interface.

Make sure to connect the power source to earth ground before powering on the device.

4. Configure:

Configure the Wi-Fi settings in WatchGuard Cloud by visiting watchguard.com/start.

FAQ

  • Q: Can I use this device outdoors?
    • A: No, this product is for indoor use only.
  • Q: How do I ensure safety and compliance with regulations?
    • A: Make sure to connect the power source to earth ground before connecting power to the device. Follow the provided guidelines and regulatory information in the user manual.

Product Overview

WatchGuard-AP230W-Indoor-Access-Point-fig \(1\)

ACTIVATE

WatchGuard-AP230W-Indoor-Access-Point-fig \(2\)

INSTALL

WatchGuard-AP230W-Indoor-Access-Point-fig
\(3\)

CONNECT

WatchGuard-AP230W-Indoor-Access-Point-fig
\(4\)

Power Options

WG8599 (US), WG8600 (EU), WG8601 (UK), WG8602 (AUS)| WatchGuard 802.3at PoE+ Injector with AC cord
WG9028 (US), WG9029 (EU), WG9030 (UK), WG9031 (AUS)| Power Supply for WatchGuard AP230W

CONFIGURE

NOTICES:
All WatchGuard products are designed and tested to meet strict safety requirements.
These requirements include product safety approvals and other global compliance
standards. Please read these instructions carefully before operating the product, and
refer to them as needed to ensure the continued safe operation of your product.
Additional information about the hardware, including additional languages, a full list
of safety approvals, global compliance standards, and certifications can be found in
the Hardware Guide for this device located on the WatchGuard website:
https://www.watchguard.com/wgrd-help/documentation/hardware-guides

  • Do not place objects on the power cord.
  • Do not obstruct the ventilation openings. These openings prevent overheating of the machine.
  • Never push objects of any kind into slots or openings on this equipment. Making a contact with a voltage point or shorting out a part may result in fire or electrical shock.
  • When removing or installing an appliance, follow the general installation safety instructions.

If protective earthing is used as a safeguard, the instructions shall require connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection). To meet safety and electromagnetic interference (EMI) requirements, you must make sure the power source is connected to earth ground before you connect power to the device. Connect the PoE interface only to PoE networks, without routing to the outside plant. This product is intended to be supplied by a Listed Power Adapter or DC power source marked “L.P.S.” (or Limited Power Source or PS2) rated 54V DC, 1A minimum, maximum ambient temperature (Tma)=40°C, or supplied by a Listed PoE Adapter marked “L.P.S.” (or Limited Power Source or PS2) rated 54VDC, 0.6A minimum, maximum ambient temperature (Tma)=40°C. For more information regarding approved power sources, see the Hardware Guide for this device.

This product is for indoor use only.

Hereby, WatchGuard Technologies Inc. declares that the radio equipment type AP230W Wireless Access Point is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of conformity is available at:

https://www.watchguard.com/wgrd-help/documentation/hardware-guides This device has software that cannot affect compliance with the Radio Equipment Directive (RED) 2014/53/EU, even if the software is changed or replaced. This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in the indicated countries]

Radio Frequencies           Max Power

2412 – 2472 MHz| 19.77 dBm
5180 – 5240 MHz| 22.81 dBm
5260 – 5320 MHz| 22.83 dBm
5500 – 5700 MHz| 26.34 dBm

Declaration of Conformity

WatchGuard Technologies, Inc.
255 S. King St., Suite 1100
Seattle, WA 98104 USA

WatchGuard Technologies Inc. hereby declares that the product(s) listed below conform to the European Union directives and standards identified in this declaration.

Product (s):

  • 802.11a/b/g/n/ac/ax Access Point, AP230W

EU Directive(s):

  • Low Voltage (2014/35/EU)
  • Electromagnetic Compatibility (2014/30/EU)
  • Energy-related Products (2009/125/EC)
  • RoHS (2011/65/EU and 2015/863/EU RoHS)
    WEEE Directive 2012/19/EU

The Radio Equipment Directive (2014/53/EU)

Common Standard(s):

  • EN IEC 62368-1:2020+A11:2020 Safety for ITE
  • EN 55032:2015/A1:2020
  • EN 55035: 2017/A11:2020
  • EN IEC 61000-3-2:2019/A1:2021 Harmonics
  • EN 61000-3-3:2013/A2:2021 Flicker

Wireless Standard(s):

  • EN IEC 62311:2020
  • EN 301 489-1 v2.2.3 (2019-11) EMC and Radio Spectrum Matters
  • EN 301 489-17 v3.2.4 (2020-09) EMC and Radio Spectrum Matters
  • EN 300 328 v2.2.2 (2019-07) Radio Spectrum Matters
  • EN 301 893 v2.1.1 (2017-05) Broadband Radio Access Networks

This device complies with Directive 2014/53/EU issued by the Commission of the European Community.

  • Manufacturer: WatchGuard Technologies 255 S. King St. Suite 1100, Seattle, WA 98104 USA
  • Radio Equipment: 802.11a/b/g/n/ac/ax Access Point
  • Type Designation AP230W
  • Specifications 802.11a/b/g/n/ac/ax (2.4GHz & 5GHz)
  • Intended Purpose Cloud Cloud-managed wireless indoor access point
  • Software Version 2.0 and higher, cloud-managed
  • Equipment Class Class II
  • Operating temperature 0° C to 40° C

The above device complies with the essential requirements and other relevant provisions to Directive 2014/53/EU when used for its intended purpose. This equipment may be operated in the USA, Canada, & Europe Union. This device has software that cannot affect compliance with the Radio Equipment Directive (RED) 2014/53/EU, even if the software is changed or replaced.

Signature

  • Full Name: Laurence Huang
  • Position: Hardware Program Manager
  • Date and Place of Issue: July 25, 2023, Seattle, WA, USA

A full list of safety approvals, global compliance standards, and certifications can be found in the Hardware Guide for this device located on the WatchGuard website: https://www.watchguard.com/wgrd-help/documentation /hardware-guides

WATCHGUARD TECHNICAL SUPPORT

  • 1.877.232.3531

  • (U.S. and Canada)

  • +1.206.613.0456

  • (all other countries)

  • www.watchguard.com/support

  • ADDRESS: 255 S. King St. Suite 1100, Seattle, WA 98104
    U.S. SALES: 1.800.734.9905

  • INTERNATIONAL SALES: +1.206.613.0895

  • WEB: www.watchguard.com

2024 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, the WatchGuard Logo, Fireware, and LiveSecurity are registered trademarks of WatchGuard Technologies, Inc. in the United States and/or other countries. All other trademarks and tradenames are the property of their respective owners. P.N. 352-4230-001 011224 Rev A

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals