VIZULO LV – 3913 Mini Martin LED Street Luminaire Instruction Manual
- July 20, 2024
- VIZULO
Table of Contents
VIZULO LV – 3913 Mini Martin LED Street Luminaire
Product Information
Specifications
- Model: VIZULO Mini Martin LED street luminaire
- Standards: EN 60598
- IP Rating: IP66
- Impact Protection: IK08/IK09/IK10
- Input Voltage: 198 – 264 V
- Weight: 5.50 – 6.50 kg
- Max Power: 145 W (T10), 140 W (T20), 120 W (T25)
FAQ
Frequently Asked Questions
- Q: How do I know if the luminaire is disconnected from the power grid?
- A: Before disassembling, ensure that the luminaire is not connected to any power source to avoid electrical shock.
- Q: How many PCB modules can be replaced in the luminaire?
- A: The luminaire can have 1 to 3 PCB modules that can be replaced following the provided instructions.
- Q: What is the maximum power consumption of the luminaire for different T types?
- A: The maximum power consumption varies with T types – 145 W for T10, 140 W for T20, and 120 W for T25.
Models
- NETTO WEIGHT
- WEIGHT MIN – MAX: 5.50 – 6.50 kg
Tools
Specification
Caution: risk of electrical shock!
Before disassembling the luminaire, check if it is disconnected from the power
grid.
Installation Instructions
-
Unscrew the screws and remove the glass
-
Disconnect the PCB modules from the driver. (Module count varies from 1 to 3).
-
Unscrew the PCB modules, replace it and screw them back into place.
-
Connect the PCB modules to the driver.
-
Lower the glass and screw it.
-
Unscrew the screws and remove the glass
-
Take a reference picture of the wiring
-
Disconnect the wires from the driver, Unscrew the EQUI wire
-
Unscrew the LED driver.
-
Replace the LED drivers.
-
Screw in the EQUI wire and the driver.
-
Connect the wires to the driver.
-
Consult the reference picture.
-
Lower the glass and screw it.
Terms Of Use And Maintenance
Before luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.
Mounting instructions
Mounting of luminaire must be performed by a qualied person according with the foollowing instructions:
- The warranty of luminaire does not apply, if the mounting of luminaire has been performed in precipitation (rain, snow, hail).
- The warranty of luminaire does not apply, if a control system unathorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
- The warranty of luminaire does not apply, if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
- The warranty of luminaire does not apply, if the LED driver program has been changed in any way.
- The warranty of the luminaire does not apply, if the logged history data of the LED driver has been deleted of VIZULO.
- The warranty of the luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged under water.
Safety instructions
Any actions with the luminaire must be performed by a qualified person, who is
certified according with national regulations and requirements.
To prevent any accidents person installing the luminaire must follow national
safety requirements and following instructions:
- The label containing technical parameters of the luminaire has to be studied before the work on it has begun.
- Any luminaire build or design changes are prohibited.
- The luminaire must be used in good technical condition and according with this instruction.
- Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
- The repair of luminaire has to be performed by a qualified and certified person.
Maintenance and repair
Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!
- The person working with the luminaire must follow national regulations and legislations that apply to maintenance and testing of electrical or electronic appliances.
- The luminaire may need to be cleaned depending on its environment.
- Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
- Only VIZULO authorized spare parts may be used for the luminaire.
- Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
- LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid water entering the luminaire.
- Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.
SIA VIZULO
- Laucu Lejas, Iecava, Latvia, LV – 3913
- www.vizulo.com