mestic MKK-400 Ceramic Heater User Manual

: July 16, 2024
: mestic

Table of Contents

Features
Technical data
Important safety instructions
First use

mestic MKK-400 Ceramic Heater

mestic MKK-400 Ceramic Heater

Features

Front housing
Air outlet
Display
Turning platform
Rear housing
Dust screen
On/off button

Technical data

Rated voltage : 220-240V~ 50Hz
Rated power : 500 – 1500W
Heating capacity : 1.5kW
Weight : 2.25kg

Important safety instructions

General safety rules should always be followed when using electrical appliances to reduce the risk of fire, electric shock and/or personal injury.
Read all the instructions and keep them for the life of the product.
Check that the mains voltage matches what is indicated on the appliance rating plate before connecting it to an earthed socket.
This appliance is intended for domestic use only.
The manufacturer is not liable for any damage resulting from failure to follow instructions.
Only use the appliance for its intended purpose. If in doubt, contact the point of sale or manufacturer.
This appliance must not be used with an external timer, programming unit, separate remote control system or other appliances that automatically switch on the heating system, as there is a fire risk if the heaters are incorrectly
positioned or covered.
The appliance should be installed on a flat, stable surface.
Make sure you place the heater in a safe place so that you do not easily trip over the appliance or the cable. Make
sure you position the heater so that it cannot fall over.
To remove the cord from the socket, do not pull on the power cord but on the plug.
If the power cord, appliance or plug is damaged, contact the retailer or manufacturer. Do not use the appliance.
The appliance is not intended to be installed in/between (cross) beams and rafters.
Do not use the appliance under a wall unit, shelf or near combustible materials, such as awnings, curtains, tapestries, etc.
The heater should not be placed directly under a socket.
Do not immerse the appliance, power cord or plug in water or other liquids.
Use only grounded and professionally connected mains connections.
Do not use the appliance near a bathtub, shower or swimming pool.
The heater is not suitable for outdoor use in humid weather, in bathrooms or other wet or damp environments.
The heater must not be placed/used in areas where flammable liquids or gases are used or stored.
Some parts of the appliance can get very hot, which can cause burns. You should be especially careful of this when there are children and vulnerable people around.
Never insert fingers, pencils or other objects through the fan openings.
Do not leave the heater unattended when the plug is in the socket.
This appliance is not intended to be used by children under 8 years old and persons with reduced physical, sensory or mental capabilities or insufficient experience and knowledge, unless they are supervised or instructed on how to use the appliance by a person responsible for their safety.
Children up to 3 years old should be kept away. When in use, someone must constantly supervise.
Children may not play with the appliance.
Do not move the appliance when it is connected. Let the appliance cool down completely before grabbing it.
Use the handle when moving the heater.
The grille does not provide full protection for young children and people with mental disabilities.
The grille on this heater is designed to prevent direct access to heating elements and must be in place when the heater is in use.
The heater must not be used if the ceramic panels are damaged.
Do not use this heater in small rooms where there are persons unable to leave the room on their own, unless they
are under constant supervision.
Do not cover the air inlet or outlet or place objects close to the unit that could obstruct air flow.
To prevent battery leakage: remove the battery from the remote control when it is empty or before storing it for an extended period of time.
If the heater is not used for an extended period, unplug it.

First use

When switched on for the first time, the appliance may produce a slight odour. Ensure adequate ventilation.

How to use

Connect the power cord to the socket and check that the mains voltage matches what is indicated on the appliance rating plate before connecting it to an earthed socket.
The heater can be operated using the front manual controls or the remote control.
The on/off button switches the heater on or off.
Tem. button:
Press repeatedly to increase the desired room temperature. After pressing the temperature button, the set temperature flashes on the display for 3 seconds before the appliance displays the room temperature again. When the desired temperature is reached, the unit switches to fan mode.
Timer button:
Press repeatedly to extend the running time at 1-hour intervals. The timer can be set from 1-12 hours. The display shows the current set running time. When the display shows the timer duration, the h symbol is lit next to the timer. To cancel the timer, press the timer button repeatedly until 00 is displayed.
Swing button:
Press to turn the oscillation function on and off. When in operation, the heater is rotated horizontally back and forth and the oscillation indicator O will light up.
Mode/On/Off button:
Press this button to select the power setting:
- Fan: fan
- Low: low heat setting
- High: high heat setting
- Shutdown: switch off
  If you press this button to switch off the appliance, the fan indicator light will blink, the power indicator light will switch off and the appliance will switch off after about 30 seconds.

Battery replacement

The remote control is powered by a lithium button cell battery (CR2025). Should the remote control stop responding, replace the battery according to the instructions below:

On the back of the remote control: press tab A to the right.
Slide out the battery drawer B.
Replace the battery with the same type and make sure the positive side is facing up.

Storage

Always let the heater cool down completely before storing it.
Never wrap the cord around the heater.
Store the appliance in a dry and dust-free environment.

Maintenance & cleaning

Before cleaning the appliance, let it cool down and unplug it.
Never immerse the appliance in water or clean it under running water.
Dust off the grilles
Using a damp sponge with water, clean only the housing of the appliance, after which you dry it with a dry cloth.
Make sure that no water gets into the control panel or the openings in the housing.
Do not use abrasives or sharp objects to clean the oven, as this may scratch the oven body.
Before switching on and using the heater again, let all parts and the surface dry very well.

Fall protection

This heater features mechanical fall protection. This protection ensures that if the heater is not placed upright on a firm
and level surface or if the heater falls over, the system automatically shuts the heater down. If this happens, place the heater on a firm and level surface and restart the heater.

Overheating protection

The heater features overheating protection. When a potential overheating temperature is reached, the system automatically switches off the heater.

Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment This means that this product must be handled pursuant to European Directive (2012/19/EU) in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Declaration of conformity

Hereby Gimeg Nederland B.V. declares that the device MKK-400, applies all basic requirements and other relevant regulations listed in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full declaration of conformity, you can contact the address listed on the backside of this manual.