Vtech RM5756HD 5 Inch HD Wi-Fi Video Baby Monitor User Guide

: July 15, 2024
: vtech

Vtech RM5756HD 5 Inch HD Wi-Fi Video Baby Monitor

Specifications

Model: RM5756HD
Product Name: 5 HD Wi-Fi Video Baby Monitor
Night Light: Included
Parent Unit Output: 5V DC 2A
Baby Unit Output: 5V DC 1A
Rechargeable Battery: 3.7V 5000mAh, 18.5Wh Lithium-ion

Product Usage Instructions

Important Safety Instructions:

Follow all warnings and instructions marked on the product.
Adult setup is required.
Do not install the baby unit at a height above a safe level.
This product is intended as an aid and should not substitute proper adult supervision.
Avoid using the product near water sources.
Use only the provided adapters to prevent damage.
Ensure correct orientation of the power adapter to avoid hazards.
Keep power cords away from any objects and do not allow them to be walked on or crimped.
Operate the product only with the specified power source.
Avoid overloading wall outlets or using extension cords.
Place the product on stable surfaces with proper ventilation.
Avoid inserting objects into the product or spilling liquids on it.
For any maintenance needs, consult an authorized service facility.

Power Adapter Information:

Parent unit output: 5V DC 2A VTech Telecommunications Ltd. Model: VT07EEU05200
Baby Unit output: 5V DC 1A VTech Telecommunications Ltd. Model: VT05EEU05100

Rechargeable Battery Information:
3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd. Model: GSP806090-5Ah-3.7V-1S1P

Frequently Asked Questions (FAQ)

Can I use the baby monitor near water sources?
No, it is advised not to use the product near water sources to prevent accidents.
What should I do if I need to clean the product?
Unplug the product from the wall outlet before cleaning. Use a damp cloth for cleaning; do not use liquid or aerosol cleaners.
Can I replace the power adapters with others?
No, it is recommended not to modify or replace the power adapters as it can lead to hazardous situations.

What does HD Video Baby Monitor do?

VTech 5” HD Wi-Fi Video Baby Monitor allows you to stay close to your baby when you are on the move or away.
This monitor is Wi-Fi enabled, which uses your home wireless network to stream live video and audio through the HD baby unit and 5-inch color screen parent unit. It allows you to maintain a constant connection to your baby.
You can also monitor from your smartphone and mobile tablet.
VTech 5” HD Wi-Fi Video Baby Monitor uses MyVTech Baby Pro app to let you instantly see and hear what’s happening with your baby from anywhere in the world.
The app can be downloaded from the App Store or the Google PlayTM Store, directly from your smartphone or mobile tablet.

Important safety instructions

The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following:

Follow all warnings and instructions marked on the product.
Adult setup is required.
CAUTION: Do not install the baby unit at a height above.
This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
This product is not intended for use as a medical monitor.
Do not use this product near water, for example, near to a bath, sink, swimming pool or shower.
CAUTION: Use only the battery provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage transportation. Disposal of battery in fire or a hot oven, mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the in instructions.
Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product.
- Power adapter information: Parent unit output: 5V DC 2A
- VTech Telecommunications Ltd.
- Model: VT07EEU05200
- Baby Unit output: 5V DC 1A
- VTech Telecommunications Ltd.
- Model: VT05EEU05100
- Rechargeable battery information: 3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd.
- Model: GSP806090-5Ah-3.7V-1S1P
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
For pluggable equipment, the socket-outlet (power adapter) should be installed near the equipment and should be easily accessible.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
Do not modify the power adapters or replace with other adapters, as this causes a hazardous situation.
Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your retailer or electricity supply provider.
Do not overload wall outlets or use an extension cord.
Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source.
Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
To reduce the risk of electric shock, do not disassemble this product, but take it to an authorised service facility. Disassembling or removing parts of the product other than via the battery door may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
You should test the sound reception every time you turn on the units or move one of the components.
Periodically examine all components for damage.
There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you are not intending to use it for some time.
Children should be supervised to ensure that they do not play with the product.
The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS

Cautions

Use and store the product at a temperature between 0oC and 40oC.
Mishandling batteries can cause burn, fire or explosion hazards.
Batteries should not be exposed to excessive heat such as bright sunshine or fire.
Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 0.9m away). Do not remove warning label on the adapter cord.
Never place the baby unit inside the baby’s cot or playpen. Never cover the baby unit or parent unit with anything such as a towel or a blanket.
Other electronic products may cause interference with your camera unit. Try installing your camera unit as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients

Should keep wireless devices at least six inches from the pacemaker.
Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

What’s in the box

Your HD video monitor package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.

Requirements

For mobile access:
MyVTech Baby Pro mobile app

Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit

Overview

Baby unit overview

Light sensor
Camera lens
Infrared LEDs
Allow you to see clearly in a dark environment.
Microphone
Night Light
Night Light Control Key
Go to Night Light section to learn more.
On/Off switch
Power it on or off.
LED indicator
- Steadily on, then off, when the baby unit is connected to the parent unit.
- Flashes when the baby unit is connecting with the parent unit, or the link to the parent unit has lost.
Speaker
Temperature sensor
PAIR
- The parent unit and baby unit provided are already paired.
- Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear a beep sound.
2. Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound.
- The baby unit will sound another beep when the reset completes.
  Then, the baby unit will reboot.
Power jack
Wall mount slots

Parent unit overview

LINK LED light
- On when the parent unit is linked to the baby unit.
- Flashes when the link to the baby unit is lost.
LED light
- On when the parent unit is connected to AC power, and the battery is charging.
- Flashes when the parent unit battery is low and needs to be charged.
3- level sound indicator light
- Green: low sound level is detected by the baby unit.
- Green and amber: moderate sound level is detected by the baby unit.
- Green, amber and red: high sound level is detected by the baby unit.
- Press and hold to talk to the baby unit.
- While in a sub-menu, press to exit.
Menu/Select
- Press to enter the main menu.
- While in a menu, press to choose an item, or save a setting.
Arrow keys
- Press to navigate left, right, up and down within the main and submenus.
- While viewing zoomed image, press to move the zoomed image leftward, upward, rightward or downward.
Microphone
Increase or decrease parent unit volume.
Zoom
- Press to zoom in/out.
- While in a sub-menu, press to view the help menu.
1. Antenna
Speaker
Power jack
RESET
Force reboot the parent unit.
Stand

Connect, charge and power on the baby monitor

Connect the baby monitor
NOTE

The rechargeable battery in the parent unit is built-in.
Use only the power adapters supplied with this product.
Make sure the parent unit and the baby unit are not connected to an electronically controlled electric power outlet.
Connect the power adapters in a vertical or floor mount position only. The adapter prongs are not designed to hold the weight of the parent unit and the baby unit, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
Make sure the parent unit, the baby unit, and the power adapter cords are out of reach of children.

Slide the power switch to power on your baby unit.
NOTE
After powering up, the baby unit status LED will turn on and then turn off after a short time.
NOTE:
Camera lens and surface may get warm during normal operation.

Charge the parent unit battery before use

The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, keep the parent unit connected to AC power.
- Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon segments are solid .
- The standby time varies depending on your actual use.
The parent unit turns on automatically after connecting to the power socket, and the welcome screen appears. You can press Power to turn the parent unit on or press and hold to turn it off.
The battery icon indicates the battery status (see the following table).

Raise the parent unit antenna for better reception

Test the sound level and position the baby monitor

Testing the sound level of the baby monitor

NOTE
This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.
CAUTION
For hearing protection, make sure the parent unit is more than 1 metre away from the baby unit. If you hear any feedback noise from the parent unit, move the parent unit further until the noise stops. You can also press on the parent unit to lower or mute the noise.
TIP
Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit,.

Positioning the baby monitor
CAUTION
Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s cot or playpen.

Place the baby unit more than 1 metre away from your baby.
To avoid causing feedback noise from your baby monitor:
- Make sure your baby unit and parent unit are more than 1 metre apart; OR
- Turn down the volume of your parent unit.

Parent unit icons

Basic operation

After powering up your baby monitor, the parent unit streams live video in direct mode. We recommend you follow the instructions on-screen to set up home Wi-Fi network with your monitor for functionality enhancements and mobile access. See Auto software and firmware update and Download app for mobile access in this Quick Start Guide.

Use the menu
Press on the parent unit to enter the main menu, choose a menu item, or save a setting. You can use the parent unit menu for advanced settings oroperations, such as to play or stop the baby unit lullaby, or adjust the baby unit sound sensitivity.
While in the menu:

Press to scroll through the menu options.
Press to select an item.
Press to return to the live video.
Press to go to the Help & info page.

Adjust speaker volume
Press to adjust the parent unit speaker volume level received from the baby unit.

Zoom
Press to zoom in or out in a fixed zoom sequence. indicates the image is magnified 3 times.

Talk to your baby via the Baby Unit

Press and hold the key.
When the icon displays on screen, speak to your parent unit. Your voice is transmitted to the baby unit.
When finished talking, release the key to hear your baby again.

Turn on/off the Parent Unit screen
You can turn on or turn off the parent unit screen without powering off the unit. You will still hear sounds from the baby unit.

Press on the parent unit to turn off the screen.
Press any key on the parent unit to turn the screen on again.

TIP

To restore to the default settings or reset the Wi-Fi connection, you can reset the parent unit by pressing the RESET key at the back of the unit.
Insert a pin into the RESET hole on the back of the parent pnit, and then gently press the button inside.

Night Light

You can control the night light remotely on the parent unit or directly on the baby unit.

On the Parent Unit:

Press .
Press or > to scroll to Night Light menu.
Press < or > to choose below options:

On the Baby Unit:

Night Light Control Key

Single Tap: Turn on/off
Tap and hold (with the light turned on): Adjust night light brightness.

Download app for mobile access

App installation

From parent unit
NOTE
Before installing the app, please connect your baby monitor to your Wi-Fi network.
Press on the parent unit, go to .

1. Press when the parent unit is idle.
2. Go to > Connect Mobile Phone.
3. Scan the QR code in the parent unit to download the app into your mobile device.

From app store

1. Browse the App Store or the Google Play store .
2. Search for the mobile app with the keyword “myvtech baby pro“.
3. Download and install the MyVTech Baby Pro mobile app to your mobile device.

OR
Scan the QR code on the right to get the app.
Note
Make sure your mobile device meets the minimum requirement for the mobile app.

Minimum requirement
The mobile app is compatible with:

AndroidTM 6.0 or later; and
iOS 12 or later.

Set up user account
In your mobile device:

Tap to run the mobile app, and then create a user account.
We recommend that you use common webmail services, such as Google Gmail for registration of your user account. Check your email (and Spam folder), and activate your new camera account via the email link, then sign in to your account.

Add camera
Follow the instructions in the mobile app to pair the camera.

How the system works

For better security and more stable connectivity, this baby monitor requires connecting to a 2.4GHz home Wi-Fi network and operating in Router mode connection.

Direct mode

Your baby monitor parent unit and baby unit connect to each other in Direct mode by default, which allows you to immediately stream video out of the box.
It is NOT recommended to continue using Direct Mode connection after initial installation.

TIP
You may experience reduced signal strength if your parent unit and baby unit are far apart, or there are obstructing factors, such as internal walls, between them. You have to set up Router mode to connect the units via your home Wi-Fi network to improve the connection between your parent unit and baby unit.

Router mode

You are required to set up your monitor in Router mode to enjoy live video streaming via your parent unit with an enhanced connection.
Router mode is the recommended mode for stable connectivity.
Router mode uses your 2.4GHz home Wi-Fi network to connect your video monitor. It supports live video streaming through the parent unit and smartphone app.
If you want to stream live video remotely with your mobile device, download and install the MyVTech Baby Pro mobile app. With the mobile app, your Wi-Fi router (not included) provides Internet connectivity to your HD video monitor system. It serves as a communicating channel between your baby unit and mobile device, allowing you to monitor and/or control your baby unit wherever you are. For more details, see Download app for mobile access section in this quick start guide.
Note
When both parent unit and app are viewing the camera simultaneously, the video quality will be optimised to deliver the best possible viewing result.

Protect your privacy and online security

VTech cares about your privacy and peace of mind. That’s why we’ve put together a list of industry-recommended best practices to help keep your wireless connection private and your devices protected when online. We recommend you carefully review and consider complying with the following tips.

Ensure your wireless connection is secure.
Before installing a device, ensure your router’s wireless signal is encrypted by selecting the “WPA2-PSK with AES” setting in your router’s wireless security menu.

Change default settings.

Change your wireless router’s default wireless network name (SSID) to something unique.
Change default passwords to unique, strong passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or personal information.
- Contains a mix of uppercase letters, lowercase letters, special characters and numbers.

Keep your devices up to date.

Download security patches from manufacturers as soon as they become available. This will ensure you always have the latest security updates.
If the feature is available, enable automatic updates for future releases. Disable Universal Plug and Play (UPnP) on your router.
UPnP enabled on a router can limit the effectiveness of your firewall by allowing other network devices to open inbound ports without any intervention or approval from you. A virus or other malware program could use this function to compromise security for the entire network.

Test the location for the baby unit

If you plan to install your baby unit in a designated location, and use your home Wi-Fi network to connect your video monitor, you need to test which of your selected monitoring areas within the house have good Wi-Fi signal strength. After you have powered on your Parent Unit, you can use your Parent Unit Wi-Fi signal strength indicator to assist in checking. Once you have identified the suitable location, you can install your baby unit. Adjust the distance between your baby unit andthe Wi-Fi router if needed.
TIP
Depending on surroundings and obstructing factors, such as the effect distance and internal walls have on signal strength, you may experience reduced Wi-Fi signal. To improve the Wi-Fi signal strength, adjust the distance or direction of your Parent Unit. Check with your Parent Unit again.

Auto software and firmware update

To ensure that your HD video monitor is always at its best performance, the parent unit will prompt a message and ask you to update its software and the baby unit’s firmware when there are new versions available. Select “Now” to reboot the system, or switch off and on the parent unit later to reboot the system into the latest software.

To check if your device is running on the latest software, or to update your device software, go to:

Software Update.

Connect your HD video monitor with home Wi-Fi network
You must connect your video monitor to your secured home Wi-Fi network in order to receive the latest software and firmware updates. To set the Wi-Fi up, go to:

Configure Wi-Fi.
Note
Make sure the baby unit is on when you set up the Wi-Fi network.

mount the baby unit (optional)

NOTE

Check for reception strength and camera angle of the baby unit before drilling the holes.
The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your baby units.

Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (5.5mm drill bit).
If you drill the holes into a stud, go to step 3.
If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are flush with the wall.
Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole.
Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the baby unit and a power supply.
Insert the screws into the holes and tighten the screws until only 6.5mm of the screws are exposed.
Place the baby unit on the wall mount bracket, and then slide it forward until it locks into place. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place.
You can maximize your baby unit’s viewing angles by tilting the wall mount bracket.
- Hold the baby unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket.
- Tilt your baby unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle.

Frequently asked questions

Below are the questions most frequently asked about the baby monitor.

Why does the baby monitor not respond normally?| Try the following (in the order listed) for common cure:

1. Disconnect the power to the baby unit and the parent unit.

2. Wait a few seconds before connecting power back to the baby unit and the parent unit.

3. Turn on the baby unit and the parent unit.

4. Wait for the parent unit to synchronise with the baby unit. Allow up to one minute for this to take place.

---|---
Why doesn’t the baby unit and parent unit power-on light illumi- nate when the units are switched on?| Perhaps the parent unit is not connected to the power. Insert the adaptorplug into the parent unit and insert the adaptor in a wall socket. Then, press Power to switch on the parent unit and to establish connection with the baby unit.
Perhaps the baby unit is not connected to the power. Insert the adaptor plug into the baby unit and insert the adaptor in a wall socket. Then, slide the ON/OFF switch to ON to switch on the baby unit to establish connection with the parent unit.
Why doesn’t my parent unit charge while con- nected to AC power?| Make sure the power is not controlled by a electronic wall switch.
The battery may de degraded through extended use or defective. See Warranty

for repair/replacement.

Why is my screen in black and white?| The screen is in black and white during night-time or in a dark room when the night vision feature is activated. This is normal.
Why do I get glare or blurry display on my screen when viewing my baby at night?| During night-time or in a dark room, the surroundings and other interfering factors, like lighting, objects, colours and backgrounds may affect the image quality on your parent unit screen. Adjust the baby unit angle or place the baby unit at a higher level to prevent glare and a blurry display.
Why does the baby monitor produce a feedback noise?| The parent unit and baby unit may be too close to each other.

• Move the parent unit away from the baby unit until the noise stops; OR

• Turn down the volume of your parent unit.

Why does the parent unit beep?| The baby unit(s) may be out of range. Move the parent unit closer to the baby unit (but not less than 1m).
The parent unit may not have enough charge for the parent unit to perform normal- ly. Charge the battery in the parent unit until the battery icon becomes solid .
The temperature of your baby’s room may be too high or too low.
Why does the parent unit react too quickly to other sounds?| The baby unit also picks up other sounds than those of your baby. Adjust the VOX sensitivity level to a lower level or lower the parent unit speaker volume.
Why don’t I hear a sound/Why can’t I hear my baby cry?| The parent unit speaker volume may be too low. See Adjust parent unit speaker volume to increase the volume.
Why can’t I establish a connection? Why is the connection lost every now and then? Why are there sound interruptions?| The baby unit may be out of range. Move the parent unit closer to the baby unit (but not less than 1m).
Other electronic products and wireless products may cause interference with your baby monitor. Try installing your baby monitor as far away from these devices as possible.

General product care

To keep this product working well and looking good, follow these guidelines:

Avoid placing it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).
DO NOT expose it to direct sunlight or moisture.
Avoid dropping the product or treating it roughly.
Clean with a soft damp cloth.
DO NOT immerse the parent unit and the baby unit in water and do not clean them under run-ning water.
DO NOT use cleaning spray or liquid cleaners.
Make sure the baby unit and parent unit are dry before you connect them to the mains again.

Storage

When you are not going to use the baby monitor for some time, store the parent unit, the baby unit and the adaptors in a cool, dry place.

Adult supervision

This baby monitor should be used as an aid and proper adult supervision is required.
Do not place the baby unit inside the crib or playpen.
As for child’s safety, touch or play with the baby monitor and all the accessories are not allowed. THIS IS NOT A TOY.

Technical specifications

Transmit frequency
- Baby unit: 2412 – 2472 MHz
- Parent unit : 2412 – 2472 MHz
Channels 13
LCD 5’’ Color LCD (IPS 1280×720 pixels)
Nominal effective range
Actual operating range may vary according to environmental conditions at the time of use.
Power requirement
- Baby unit power adapter: Output: 5V DC, 1A.
- Parent unit power adapter: Output: 5V DC, 2A.
- Parent unit battery: 3.7V 5000mAh, 18.5Wh Lithium-ion battery

Credits:

The Background Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Stream Noise sound file was created by Caroline Ford, and is used under the Creative Commons license.
The Crickets At Night sound file was created by Mike Koenig, and is used under the Creative Commons license.
The Heart Beat sound file was created by Zarabadeu, and is used under the Creative Commons license.

Product warranty

Declaration of Conformity

This product is intended for use within Europe.
This equipment compiles with the essential requirements for the Radio Equipment and Telecommunications
Terminal Equipment Directive 2014/53/EU.
VTech Telecommunications Ltd. hereby declares that this Video Baby Monitor RM5756HD is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
The Declaration of Conformity for the RM5756HD is available from www.vtech.com/rtte-directive.

Disposal of batteries and product

The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pn) set out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the market after 13th August, 2005.
Help protect Importer: Snom Technology GmbH. the environment by disposing of your product or batteries responsibly.