Valera 533 Hairdryer Wall Holder Instruction Manual
- July 14, 2024
- Valera
Table of Contents
Valera 533 Hairdryer Wall Holder
Specifications
- Manufacturer: Ligo Electric SA
- Model Number: Mod. Nr.
- Dimensions:
- Mod. 533.. – 158 mm (front model), 183 mm (vertical model), 245 mm (front model with switch)
- Mod. 554.. – 148 mm (front model), 160 mm (vertical model), 225 mm (front model with switch)
Product Information
This product is a hairdryer wall holder designed for mounting hairdryers securely on walls. It is manufactured by Ligo Electric SA in Switzerland under the trademark Valera.
Usage Instructions
Assembly
- Read the assembly and operating instructions thoroughly before installation.
- The wall holder can be installed by a qualified electrician in accordance with safety regulations.
Installation options:
- A = Fixed connection
- B = Flexible connection
Operating Instructions
- Switch on the wall holder (if equipped with a switch) by setting it to 0 or 1 for off/on.
- Adjust the power settings using the designated buttons or sliders for low, medium, and high power levels.
Safety Instructions
- Ensure the hairdryer is properly secured in the wall holder before use.
- Follow all safety warnings and precautions provided in the manual.
FAQ
Q: What are the warranty conditions for this product?
A: Valera provides a warranty based on official terms and conditions.
Please refer to the warranty information provided.
Guarantee card Garantiekarte
Stamp and signature of dealer
INSTRUCTIONS FOR USE AND INSTALLATION
Hairdryer
Wall holder
Made by Ligo Electric SA – Via
ASSEMBLY
mod. 036
mod. 038A – 038B
ASSEMBLY AND OPERATING INSTRUCTIONS
Original instructions
Read these instructions thoroughly. Available also on
www.valera.com
CAUTION
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. Make sure the electrical system is fitted with a device which guarantees omnipolar disconnection from the electricity mains under category III overvoltage conditions.
- Make sure the unit is perfectly dry before using it.
- WARNING: Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- This hairdryer must be fixed so that a person taking a bath or shower cannot reach the handle, considering the cord at maximum extension.
- This appliance can be used by children from 8 years of age and over, and by persons with limited physical, sensory or mental abilities or who lack the relevant experience and knowledge, if they are suitably supervised or have been educated to use the appliance safely and made aware of the associated risks.
- Do not allow children to play with the appliance.
- Children must not perform cleaning and maintenance procedures unless supervised.
- Do not use your unit if it is not working properly. Do not try to repair this electrical unit yourself, rather contact an authorized technician. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard.
- Plug the hairdryer into an alternating current outlet only, and make sure that the voltage of your electricity supply is the same as that indicated on the rating plate of the appliance.
- Do not immerse in water or other liquids.
- Never put the appliance in a place where it could fall into water or in other liquids.
- Do not try to salvage an electrical appliance which has fallen into water.
- Turn the unit off when you put it down.
- Unplug the appliance when not in use, but never do it by pulling the cord.
Mod. Nr.
Date of purchase
Name and full address of purchaser
SERVICE CENTERS
CH VALERA – Service
Via Ponte Laveggio, 9
6853 Ligornetto / Mendrisio
Other countries www.valera.com/service
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>