PHILIPS H1-LED Ultinon Head Lights Instruction Manual
- July 15, 2024
- Philips
Table of Contents
PHILIPS H1-LED Ultinon Head Lights
Specifications
- Approved for road traffic in selected countries and vehicle models only
- LED replacement light source for right-hand traffic
- High light intensity, avoid looking directly at the beam
FAQ
- Q: Can the LED light source be used in countries with left-hand traffic?
- A: No, the LED lamp must be replaced with a halogen lamp before entering a country with left-hand traffic.
- Q: How can I authenticate the product and download the certificate?
- A: Scan the QR code on the packaging to authenticate the product and download the certificate.
INFO: Images are for illustration purposes only.
APPROVAL DOCUMENT
APPROVAL DOCUMENT
Check approved vehicle type and approval mark of the headlamps.
INFORMATION
WHAT IN THE BOX
INSTALLATION INSTRUCTIONS
SAFETY INFORMATION
D= Distance between clamp:
Option A
Option B
Option C
Option D
TEST
LED CANBuS
Detailed Information in the specific installation instructions of the CANbus. (14)
Print the certificate
How to get general type approval for use in your vehicle on public roads: (16)
- Scan the QR code on the top of the packaging to authenticate the product and download the certificate.(17)
- Print out the approval document.(18)
- Keep the approval certificate at all times with you in the vehicle. (19)
- In countries where applicable, paste the sticker on the headlight unit in the engine compartment / under the handlebar. (20)
You are responsible to comply with all applicable legal requirements. (21)
Approved for road traffic for selected countries and vehicle models only.
Check your country/vehicle at:
Philips.com/roadlegalLED. (22)
General Guidelines
- This LED replacement light source is only approved for right-hand traffic. Before entering a country with left-hand traffic, the LED lamp must be replaced by a halogen lamp. (24)
- Please check car installation manual and follow instructions for lamp replacement. (25)
- The LED light source, cables and components must be mounted in a way that the headlamp won’t be damaged and that its function is maintained. All parts must be fixed safely. Check correct position and safe fixation of LED lamp within the lamp holder. (26)
- The replacement of the lamp in the headlamp requires inspection and eventually adjustment of headlamp setting by a qualified garage. (27)
General guidelines-Safety
- The replacement of the halogen lamp by an LED light source may effect the deicing and defogging behavior of the headlamp. (29)
- The LED light intensity is very high while turned on. Do not look directly into the beam to avoid damage to the eyes. (30)
- Please wear safety glassed while replacing halogen lamp. (31)
- Lamps will heat up during operation. Do not touch. Please let it cool 32 down in order to avoid potential injury due to contact with hot surface. (32)
- Please wear safety gloves to avoid injuries during mounting. (33)
- Keep out of reach of children. (34)
Section|
---|---
①| Do not touch!| ⑱| Print out the approval document (ABG).
②| Please check car installation manual and follow instructions for lamp
replacement| ⑲| Keep the approval certificate(ABG) at all times with you in
the vehicle.
③| Low beam / high beam| ⑳| In countries where applicable: paste the sticker
on the headlight unit next to the engine compartment / under the handlebar.
④| Off| ㉑| You are responsible to comply with all applicable legal
requirements.
⑤| Distance D| ㉒| Approved for road traffi c for selected countries and
vehicle models only. Check your country/vehicle at:
Philips.com/roadlegalLED.
⑥| Typical application: wide D (keep center ring)| ㉓| General guidelines
⑦
|
Special case: narrow D (remove center ring)
|
㉔
| This LED replacement light source is only approved for right-hand traffic.
Before entering a country with left-hand traffic, the LED lamp must be
replaced by a halogen lamp.
⑧| Go to Option A / B / C / D| ㉕| Please check car installation manual and
follow the instructions for lamp replacement.
⑨
|
Pin
|
㉖
| The LED light source, cables and components must be mounted in a way that
the headlamp won‘t be damaged and that its function is maintained. All parts
must be fixed safely. Check correct position and safe fixation of LED lamp
within the lamp holder.
⑩| Reference gap| ㉗| The replacement of the lamp in the headlamp requires
inspection and eventually adjustment of the headlamp setting by a qualified
garage.
⑪| Final position| ㉘| General guidelines-Safety
⑫| Attention! Push lamp into final position.| ㉙| The replacement of the
halogen lamp by an LED light source may affect the deicing and defogging
behavior of the headlamp.
⑬| Test| ㉚| The LED light intensity is very high while turned on. Do not look
directly into the beam to avoid damage to the eyes.
⑭| Detailed information in the specific installation instructions of the
CANbus adpater| ㉛| Please wear safety glasses while replacing halogen lamps.
⑮| Print the certificate| 32| Lamps will heat up during operation. Do not
touch. Please let it cool down in order to avoid potential injury due to
contact with hot surface.
⑯| How to get general type approval (AGB) for use in your vehicle on public
roads| 33| Please wear safety gloves to avoid injuries during mounting.
⑰
| Scan the QR code on the top of the packaging to authenticate the product and download the certificate.|
34
|
Keep out of reach of children.
SCAN
Lumileds is the warrantor of this product.
2024 © Lumileds Holding B.V. All rights reserved.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke
Philips N.V. and are used under license.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>