Tenergy 96117 Smart Battery Charger Owner’s Manual

July 13, 2024
TENERGY

Tenergy 96117 Smart Battery Charger

Ultra Fast NiMH/NiCd Charger

Universal Battery Charger (with LCD Display)

Owner’s Manual

Thank you for purchasing this Charger. Read the instruction manual thoroughly before use and keep the manual for later reference. This Charger can charge all AA/AAA/C/D/9V Nickel Metal-Hydride (Ni-MH) batteries quickly and efficiently.

Warning

  • Batteries (if included) are not charged as shipped. Must be charged before first use.
  • Charge only Ni-MH-type batteries on this charger.
  • Batteries may leak or explode causing personal injury if inserted improperly, disposed of in fire, mixed with other battery types, or short circuit.

Features

  • Specially designed with an LCD Battery Indicator & discharge function.
  • The discharge Function reduces the memory effect and enables full discharge for a longer battery life cycle.
  • For Use in Indoor
    • Powered by the supplied switch-mode adaptor (100-240V AC) for worldwide use.
  • Recharges 1 piece to 4 pieces of AA/AAA/C/D Ni-MH batteries and 1 to 2 pieces of 9V cells (Ni-MH) at a time.
  • 4 individual charging channels for AA/AAA/C/D and 2 individual charging channels for 9V cells.
  • Intelligent Microprocessor Controlled – Batteries life is well protected by negative delta V cut-off function and timer protection.
  • Defective and Non-rechargeable battery detection.
  • Automatic charging current selection for AA/AAA/C/D/9V batteries.
  • Built-in 5V USB output port (output: 5V DC 500mA) on the back side of the charger, designed to charge and power up your Digital device.**(see USB function)
  • Electric LCD display with Blue color backlight and designed with
    • Battery Charging Status Indication
    • Battery Discharging Status indication.
  • When the batteries are fully charged, the charger will change to Trickle mode automatically and the Blue color “Backlight” will turn off after 2.5 hours.
  • A “Backlight button” is designed to turn on the backlight for 10 seconds during the nighttime.

Safety Features

  • Negative delta V cut-off function for AAA/AA/C/D size batteries.
  • Safety timer to prevent overcharge.
  • Short circuit protection.
  • Reverse-polarity protection.
  • Bad cell Detection.

Charging Instructions

  1. Insert 1 to 4 pieces of AA/AAA/C/D or 1 to 2 pieces of 9V cell rechargeable Ni-MH batteries into the battery compartment.
  2. Make correct contact for polarity ( + and – ); according to the sign in the battery compartment.
  3. The charger will adjust the suitable charging current for AA/AAA/C/D/9V battery automatically.
  4. For Use indoors: Connect the supplied AC adaptor’s barrel plug into the jack on the back of the charger. Plug the AC adaptor into a household electric outlet. The switching power supply will adjust automatically.
    • Caution : The supplied AC adaptor supplies 12VDC and delivers 1000mA, and its plug fits into the charger’s DC input jack. Using an adaptor that does not meet these specifications could damage the charger or the adaptor.
  5. The LCD will indicate the proper charging and the wording “Charging” will be shown. (The Blue backlight will light up during the charging process and turn off once the batteries are fully charged)
  6. After the batteries are fully charged, the wording “FULL” will be indicated on the LCD screen to indicate batteries are ready for use.
  7. Unplug the charger and remove the batteries from the charger when not in use.
  8. Begin again at Step 1 to charge the next set of batteries.

Discharging Instructions

  1. Insert 1 to 4 pieces of AA/AAA/C/D rechargeable Ni-MH batteries into the battery compartment.
  2. Make correct contact for polarity ( + and – ) ; according to the sign in the battery compartment.
  3. For Use indoor: Connect the supplied AC adaptor’s barrel plug into the jack on the back of the charger. Plug the AC adaptor into a household electric outlet. The switching power supply will adjust automatically.
    • Caution : The supplied AC adaptor supplies 12VDC and delivers 1000mA, and its plug fits into the charger’s DC input jack. Using an adaptor that does not meet these specifications could damage the charger or the adaptor.
  4. Press the “discharge button” on the left-hand side of the control panel, the LCD will indicate the proper discharging, and the wording “Discharging” will be shown. (The Blue backlight will light up during the discharging process)
    • Noted : The discharge process will not function when you press the “discharge button” more than 1 minute after the charging process starts.
  5. The 4 battery icons will keep flashing until all the batteries have been discharged.
  6. After the batteries are fully discharged, the charging process will be started automatically and the wording “Charging” will be indicated on the LCD screen to indicate the charging process started.

Bad Cell Detection

When the charging process is started, the charger detects the health status of each of the cells in the battery compartment. If any batteries are unsuitable for charging. i.e. short circuit or reversed polarity, the word “BAD” will indicate on the LCD screen and the”battery” icon will flash.

TECHNICAL DATA

Input DC 12V 1000mA USE WITH AN EXTERNAL ADAPTOR
Charge current: Ni-MH
AAA size : 500mA AAA 500-1200mAh
AA size : 1300mA AA 1300-2800mAh
C size : 1300mA C 1800-4500mAh
D size : 1300mA D 1800-9000mAh
9V size (PP3): 30mA 150-300mAh
Discharge current: AA, AAA, C, D 400 mA
Detect Method -DV auto cut-off for AAA, AA, C, D size batteries
For battery Type AAA 500-1100mAh AA 1300-2700mAh C 1300-4500mAh D

1300-9000mAh 9V 150-250mAh

Charge time will vary depending on the brand, capacity, and condition of the batteries being charged.

USB function

  1. The USB socket will be ready for use only when charging is completed or there is no battery in the charger compartment.
  2. The “USB function indicator” will be shown on the LCD screen to indicate the USB socket is ready for use.
  3. Make sure the maximum loading is not exceeding 500mA for the USB socket.

Important Safety Instructions

  1. Before charging, read the instructions.
  2. This charger is intended for use with Nickel-metal-hydride rechargeable batteries only. Attempting to charge other types of batteries may cause personal injury and damage to the charger.
  3. Do not charge non-rechargeable batteries.
  4. Do not expose the charger to rain or moisture. For indoor use only.
  5. Remove from mains when not in use.
  6. Never use an extension cord or any attachment not recommended by the manufacturer, otherwise, this may result in a risk of fire, electric shock or injury to persons.
  7. Do not operate the charger if it has been subjected to shock or damage. Take it to a qualified serviceman for repair.
  8. Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire.
  9. Unplug the charger from the outlet before attempting any maintenance or cleaning.
  10. This power unit is intended to be correctly orientated in a vertical or floor-mount position.
  11. Before scrapping your charger, remove the batteries from the unit and they are disposed of safely.
  12. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

SAVE THESE INSTRUCTIONS, DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

FREQUENTLY ASKED QUESTIONS

What is the Tenergy 96117 Smart Battery Charger?

The Tenergy 96117 Smart Battery Charger is a versatile battery charger designed to charge multiple types of rechargeable batteries, including AA, AAA, C, D, and 9V.

What are the dimensions of the Tenergy 96117 Smart Battery Charger?

The Tenergy 96117 Smart Battery Charger measures 2.5 inches in depth, 7 inches in width, and 5 inches in height.

How much does the Tenergy 96117 Smart Battery Charger weigh?

The Tenergy 96117 Smart Battery Charger weighs 1.25 pounds.

What is the output voltage of the Tenergy 96117 Smart Battery Charger?

The output voltage of the Tenergy 96117 Smart Battery Charger is 5 volts.

What is the price of the Tenergy 96117 Smart Battery Charger?

The Tenergy 96117 Smart Battery Charger is priced at $35.99.

What is the item model number of the Tenergy 96117 Smart Battery Charger?

The item model number of the Tenergy 96117 Smart Battery Charger is 96117.

How many batteries does the Tenergy 96117 Smart Battery Charger require?

The Tenergy 96117 Smart Battery Charger requires 1 AAA battery for its operation.

Who manufactures the Tenergy 96117 Smart Battery Charger?

The Tenergy 96117 Smart Battery Charger is manufactured by Tenergy.

What is the input specification for the Tenergy 96117 Smart Battery Charger?

The input specification for the Tenergy 96117 Smart Battery Charger is 12V DC 1000mA, which should be used with the supplied AC adapter.

What is the charge current for AAA batteries on the Tenergy 96117 Smart Battery Charger?

The charge current for AAA batteries on the Tenergy 96117 Smart Battery Charger is 500mA.

What is the charge current for 9V batteries on the Tenergy 96117 Smart Battery Charger?

The charge current for 9V batteries on the Tenergy 96117 Smart Battery Charger is 30mA.

What is the USB output specification for the Tenergy 96117 Smart Battery Charger?

The USB output specification for the Tenergy 96117 Smart Battery Charger is 5V DC 500mA.

What detection method does the Tenergy 96117 Smart Battery Charger use for AA, AAA, C, and D size batteries?

The Tenergy 96117 Smart Battery Charger uses the Negative Delta V (- ∆V) cut- off method for detecting when AA, AAA, C, and D size batteries are fully charged.

Why won’t my Tenergy 96117 Smart Battery Charger power on?

Ensure that the Tenergy 96117 Smart Battery Charger is properly plugged into a functioning power outlet. Check the power cord and plug for any visible damage.

What should I do if my Tenergy 96117 Smart Battery Charger is not charging the batteries?

Confirm that the batteries are inserted correctly with the proper polarity. Check that the batteries are compatible with the Tenergy 96117 Smart Battery Charger and that the charger is properly connected to a power source.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: Tenergy 96117 Smart Battery Charger Owner’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals