TENERGY 01141 9V Battery Charger Instruction Manual

June 17, 2024
TENERGY

TENERGY 01141 9V Battery Charger

TENERGY-01141-9V-Battery-Charger-product

IMPORTANT SAFETY INSTURCTIONS

  1. SAVE THESE INSTRUCTIONS & CAREFULLY FOLLOW THEM, TO REDUCE THE RISK DANGER OF FIRE OR ELECTRIC SHOCK.
  2. This charger is intended for Ni-MH/NiCD rechargeable batteries only. Attempting to charge non-rechargeable batteries may cause personal injury and damage to the charger.
  3. Do not expose charger to water or moisture. For indoor usage only.
  4. Remove from power when not in use.
  5. Do not operate the charger if it has been subjected to shock or damage.
  6. Do not disassemble the charger. Incorrect reassembly may result in a risk of electric shock or fire.
  7. Unplug the charger from USB port before attempting any maintenance or cleaning. Use damp cloth to clean the surface, do not immerse into water.
  8. Before scrapping your charger, remove batteries from the unit and recycle or dispose the batteries safety.
  9. This appliance is not recommended for children under 8 years old or persons with reduced physical, sensory, or mental capabilities. Adult supervision is recommended.
  10. Do not let children play with the appliance, it is not a toy.
  11. Cleaning and user maintenance shall not be made by children without adult supervision.

Features

  • DC 5V 1A USB input.
  • Recharges 1 or 2 pieces of 9V NiMH / 9V NiCD batteries at a time.
  • LED display for charging status.
  • Negative Delta V cut-off, timers cut-off, reverse polarity protection.

Charging Instruction

  1. Insert 1 or 2 pieces of rechargeable 9V size NiMH / NiCD battery into the battery compartment. Make current contact for polarity (+ and -) according to the sign in the battery compartment.
  2. Connect the charger with supplied USB cable into a standard 5V 1A USB port (not included). The LED will indicate charging status.
  3. After charging, remove battery from charger, disconnect charger From power.

LED Indicator

Charger initialization (Connected to power) Red and then Green
Standby Solid Green
Charging Solid Red
Charging Completed Solid Green
Bad Cell Detected Red Flashing
Charging Error / Abnormal Input Red Flashing (Both bays)

Thank you for your purchase

Please contact us directly if you have any questions or need any support!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals