PRO DG SYSTEM DSP ProDGnet Software User Guide
- July 13, 2024
- PRO DG SYSTEM
Table of Contents
PRO DG SYSTEM DSP Pro DG net Software
DSP. Pro DG net
Pro DG net software allows an instantaneous and intuitive view of the status of all systems, as well as absolute control of the different parameters individually (unit by unit).
To operate with Pro DG net software from your PC you will only need:
- Download Pro DG net software at Pro DG Systems website (section “Support” > “Software”): https://prodgsystems.com/19-scrpt-software.html
Easy to download, all the necessary drivers for installation are included.
Important: the software is currently available for any version of Windows
(32 and 64 bits).
- Acquire Pro DG net interface (optional), to connect the DSP module housed in the amplifier with your PC. To purchase Pro DG net interface contact us at: info@prodgsystems.com or consult your authorized Pro DG Systems distributor.
USB socket to connect with PC.
Below is a guide for use and information on the different menus of the Pro DG net software, which we can see when we connect the DSP module of the unit to the PC, through the Pro DG net interface:
Once the software is downloaded on your PC; create your network of Pro DG Systems systems, to do this connect the Ethernet cabling to the different units;
When you start the software, the general menu will be displayed by default. (OVERVIEW);
This menu allows modifying different options on input A and outputs 1 and 2, such as: Mute, Limiter, Gain, Polarity and Delay.
When clicking “Connect” > “Remote mode”, in the top bar;
The following dialog box will appear;
Allowing connection to the DSP module of each unit connected to the Ethernet
network.
After pressing “OK” all connected units will be displayed (in green) to the left of the menu;
By clicking on the INPUT menu, a 31-band parametric equalizer is displayed, allowing you to select the type of Filter, Frequency, Bandwidth (Q), Gain and Bypass;
On the left of the menu, you can manually modify Gain, Mute, Delay, Bypass and
input channel selection.
To the right of the menu is a noise gate where we find Threshold, Attack,
Release and a Bypass of the input noise gate.
To apply changes to any of the units connected to the Pro DG net network, simply click on the desired unit.
To select factory stored presets, it will be necessary to click “Memory” >
“Preset manager”.
The unit has 5 factory presets.
Then, the factory stored preset selection menu will be displayed;
The meaning of the colors shown next to each preset is as follows:
Empty Preset.
Preset stored in memory.
Preset that we want to appear by default when turning on the unit.
Currently selected preset.
Preset currently selected and that will appear by default when turning on the
unit.
“Save” allows saving changes made to the selected preset.
“Recall” allows reloading a stored preset.
“Boot” allows setting the selected preset as the desired preset that will
appear by default when turning on the unit.
To Import or Export presets individually (preset by preset), from PC to amplifier unit or vice versa, it will necessary to click “Memory” > “PC preset”.
The “Export all presets” tab allows exporting all the presets stored on the PC
to the unit.
The “Import presets package” tab allows importing all the presets stored on
the unit to the PC.
To change the language, click “Tool” > “Language”.
If you want to change the menu color, click “Tools” > “System Color”.
By having a network of systems connected to each other through Ethernet
cabling and RS485 protocol, you have the possibility of creating a group of
systems, which allows any change or equalization made to be applied to all the
units that are part of the same network.
For example, if we have twelve units AVIATOR S 115 A, when creating a group
made up of these units, any change or equalization made will be applied to all
units;
To create a system group, click “Tool” > “Network Edition”
Then click on the magnifying glass icon;
The following dialog box will appear. Click “OK” button”.
Once the previous step has been completed, all the units connected to the network will be displayed on the left of the menu (the group has not been created yet). Then click “Device List” button”.
The following dialog box will appear;
Next, we will select all the units that will be part of the group and click on the right arrow icon, the units that are displayed in the box on the right are the ones that will be part of the same group;
We will press “OK” button, which will cause the following dialog box to appear, in which we can modify the name of the created group, as well as different parameters of it;
By pressing “OK” button in the previous step, the group creation process will be completed. In the menu on the left we can see that all the selected units are already part of the same group.
DSP. Selecting presets in the unit itself
It is possible to select stored presets in the DSP unit, directly from the
AVIATOR S 115 A amplifier.
To do this, follow the following steps:
-
Connect the system to the mains and put the switch button in ON position.
-
Move the preset selector to select the desired preset.
The factory presets included are the following:
- Preset nº1: to combine AVIATOR S 115 A with AVIATOR 115 A. Frequency cutt-off applied to AVIATOR S 115 A; 100 Hz.
- Preset nº2: to combine AVIATOR S 115 A with AVIATOR 115 A. Frequency cutt-off applied to AVIATOR S 115 A; 125 Hz.
- Preset nº3: to combine AVIATOR S 115 A with AVIATOR 112 A. Frequency cutt-off applied to AVIATOR S 115 A; 100 Hz.
- Preset nº4: to combine AVIATOR S 115 A with AVIATOR 112 A. Frequency cutt-off applied to AVIATOR S 115 A; 125 Hz.
- Preset nº5: to combine AVIATOR S 115 A with AVIATOR i 804. Frequency cutt-off applied to AVIATOR S 115 S; 150 Hz.
Customer Support
If you have any technical problem or
questions about Pro DG Systems products; contact our technical support
department at: sat@prodgsystems.com
