PRO DG SYSTEM DSP ProDGnet Software Instructions

: July 13, 2024
: PRO DG SYSTEM

Table of Contents

PRO DG SYSTEM DSP ProDGnet Software
DSP. Selecting presets in the unit itself
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PRO DG SYSTEM DSP ProDGnet Software

Product Information

Specifications

Product Name: DSP. ProDGnet
Remote processing, control, and management software
Compatible with Windows (32 and 64 bits)
Interface: USB socket, Ethernet cable socket, RS485 protocol

Product Usage Instructions
Connecting and Setting Up ProDGnet Software

Download the ProDGnet software from the Pro DG Systems website.
Install the necessary drivers included in the download.
Acquire the ProDGnet interface to connect the DSP module to your PC.
Connect the Ethernet cabling to different units to create a network.
Start the software and access the general menu (OVERVIEW).

Modifying Settings

Access different options for input A and outputs 1 and 2 in the general menu.
Click ‘Connect > Remote mode’ to connect to the DSP module of each unit.
Adjust parameters such as Mute, Limiter, Gain, Polarity, and Delay.

Applying Changes and Managing Presets:

Use the 31-band parametric equalizer in the INPUT menu for detailed adjustments.
Manually modify Gain, Mute, Delay, Bypass, and input channel selection.
Save and recall factory presets using the Preset manager.
Import or export presets individually between PC and amplifier unit via Memory > PC preset.

Frequently Asked Questions (FAQ):
Q: Can I use ProDGnet software on Mac operating systems?
A: Currently, the software is available only for Windows (32 and 64 bits).

DSP. ProDGnet

ProDGnet software allows an instantaneous and intuitive view of the status of all systems, as well as absolute control of the different parameters individually (unit by unit).
To operate with ProDGnet software from your PC you will only need:
Download ProDGnet software at Pro DG Systems website (section “Support” > “Software”): https://prodgsystems.com/19-scrpt-software.html
Easy to download, all the necessary drivers for installation are included.
Important: the software is currently available for any version of Windows (32 and 64 bits).
Acquire ProDGnet interface (optional), to connect the DSP module housed in the amplifier with your PC. To purchase ProDGnet interface contact us at: info@prodgsystems.com or consult your authorized Pro DG Systems distributor.
Remote processing, control and management are carried out through ProDGnet software.
Below is a guide for use and information on the different menus of the ProDGnet software, which we can see when we connect the DSP module of the unit to the PC, through the ProDGnet interface:
Below is a guide for use and information on the different menus of the ProDGnet software, which we can see when we connect the DSP module of the unit to the PC, through the ProDGnet interface:
This menu allows modifying different options on input A and outputs 1 and 2, such as: Mute, Limiter, Gain, Polarity and Delay.
When clicking “Connect” > “Remote mode”, in the top bar;

The following dialog box will appear;
Allowing connection to the DSP module of each unit connected to the Ethernet network.

After pressing “OK” all connected units will be displayed (in green) to the left of the menu;
By clicking on the INPUT menu, a 31-band parametric equalizer is displayed, allowing you to select the type of Filter, Frequency, Bandwidth (Q), Gain and Bypass;
On the left of the menu, you can manually modify Gain, Mute, Delay, Bypass and input channel selection.
To the right of the menu is a noise gate where we find Threshold, Attack, Release and a Bypass of the input noise gate.
To apply changes to any of the units connected to the ProDGnet network, simply click on the desired unit.
To select factory stored presets, it will be necessary to click “Memory” > “Preset manager”.
The unit has 5 factory presets.
Then, the factory stored preset selection menu will be displayed;

The meaning of the colors shown next to each preset is as follows:

Empty Preset.

Preset stored in memory.
Preset that we want to appear by default when turning on the unit.

Currently selected preset.
Preset currently selected and that will appear by default when turning on the unit.

“Save” allows saving changes made to the selected preset.
“Recall” allows reloading a stored preset.
“Boot” allows setting the selected preset as the desired preset that will appear by default when turning on the unit.
To Import or Export presets individually (preset by preset), from PC to amplifier unit or vice versa, it will necessary to click “Memory” > “PC preset”.
The “Export all presets” tab allows exporting all the presets stored on the PC to the unit.
The “Import presets package” tab allows importing all the presets stored on the unit to the PC.
To change the language, click “Tool” > “Language”.
If you want to change the menu color, click “Tools” > “System Color”.
By having a network of systems connected to each other through Ethernet cabling and RS485 protocol, you have the possibility of creating a group of systems, which allows any change or equalization made to be applied to all the units that are part of the same network.
For example, if we have twelve units AVIATOR 115 A, when creating a group made up of these units, any change or equalization made will be applied to all units;
To create a system group, click “Tool” > “Network Edition”
Then click on the magnifying glass icon;
The following dialog box will appear. Click “OK” button”.
Once the previous step has been completed, all the units connected to the network will be displayed on the left of the menu (the group has not been created yet). Then click “Device List” button”.
The following dialog box will appear;
Next, we will select all the units that will be part of the group and click on the right arrow icon, the units that are displayed in the box on the right are the ones that will be part of the same group;
We will press “OK” button, which will cause the following dialog box to appear, in which we can modify the name of the created group, as well as different parameters of it;
By pressing “OK” button in the previous step, the group creation process will be completed. In the menu on the left we can see that all the selected units are already part of the same group.